How to roll back windows 7 on a laptop. How to create a restore point in Windows and roll back the system

And how to create a restore point, I have already written. Now is the time to write how to do system restore in windows 7, and to put it simply, now I will write about how to do a system restore.

If you have some kind of problem with your computer, for example, it has become very buggy, or even worse, it doesn’t start at all, then the first thing you need to do is to try to roll back the system, thereby we will return the settings and system files from the backup that was created for example, two days ago, when the computer was still working normally.

This is a good opportunity to quickly fix the computer and return it to normal working condition. I will write three ways that you can roll back to Windows 7.

• The first way: how to roll back from under Windows.
• The second way: how to do a system restore from safe mode.
• The third way: recovery using a boot disk with Windows 7.

System restore will not affect your personal files.

System rollback from Windows 7

This method is useful when the computer turns on and works, no matter how it works, the main thing is that it works :). For example, after installing some program or driver, there were problems with the computer. You deleted the program, but the problems remained. In this case, a system rollback should help.

We do this: click “Start” and start writing in the search bar "recovery". In the search results, find and run the program "System Restore".

A window will open in which we click "Next".

Now you need to select the restore point to which you want to roll back and click "Next".

Restore point confirmation. We press "Finish".

Another warning, click "Yes".

A window will appear with preparation for recovery. Then the computer will restart and a message will appear stating that.

We are waiting for the computer to boot in safe mode. Further, all actions are almost the same as restoring from under Windows, but I will write again, just in case :).

Click start and enter "restored ...", run the utility "System Restore".

Since I just rolled back the system, I got an item with the ability to cancel the restore. Choose "Choose a different restore point" and click “Next” (you will probably need to click just next).

Select a point for rollback and click "Next".

Click on the button "Finish".

We answer one more warning "Yes".

The computer will restart and turn on in normal mode. Of course, if rolling back to the previous settings helped solve your problem with system boot.

Reverting to previous settings using a boot disk

I left this method for dessert, because here you will need a boot disk with Windows 7. But this method has its pluses. For example, you can roll back when even the safe mode does not work, in short, in the most difficult cases :).

As I already wrote, you need a boot disk with Windows 7, the article says how to create it. Next, you need to enter the BIOS and boot from the installation disk.

It will search for installed systems. If you have more than one, then select the one you need and click "Next".

Then choose "System Restore". Further, the whole process does not differ from the first two methods.

In the next window, click the “Finish” button and answer the warning.

We pull out the disk from the drive, and the computer should boot in the usual way. Everything!

This is an interesting story about how to roll back the system can be completed :). It seems to have written everything, I'm waiting for your comments and wishes in the comments. Good luck!

Recovery directly from under the system
This method is useful for those whose system boots and works, and it does not matter how, the main thing is that it starts. For example, if some problems appeared after you installed several programs or drivers. However, removing the programs did not return anything. In this case, the system rollback will save the situation.

To do this, click "Start", enter "recovery" in the search bar. Among the search results, we are looking for "System Restore":

The window that opens will display a list of restore points. Choose the most convenient for you and click "Next":

Now we need to confirm the restoration. To do this, click the "Finish" button:

The Windows system will be a little annoying, and will ask you to confirm your actions again:

After that, system recovery begins. Be prepared to wait, because it may take some time. After completion, the procedure will be executed and a message about the successful operation will appear:

This is the end of the first method. If the problem persists, then try selecting a different restore point.

Recovery using safe mode:
So, the second method should help those whose system does not normally boot in the usual way. Practice has shown that this method is most often the most effective.

To enter safe mode, you need to restart the computer and immediately press the F8 key. If everything is done correctly, a menu will appear in which you need to select the system boot option. We need "Safe Mode" and press the "Enter" key.

We wait a little time for the system to load. Now open "System Restore" in the same way as described in the first paragraph. If you did a restore before, then a new item will appear on the page that opens, which rolls back the system rollback (a tautology, but it's true). We will need the item “Select another restore point” and click the “Next” button (if there was no recovery before, then you just need to immediately click “Next”).

The remaining actions do not differ from those described in the first paragraph.

Recovery using the Windows installation disc:
This method is described last, since for it you must have an installation disk (or) of the system. This method has its pros and cons. For example, it will help if safe mode does not start. Such cases can be called the most difficult.

So, insert the disk into the drive and boot from it. If everything is done correctly, then a window with a choice of language appears. Choose the most convenient and click "Next". On the next window, select "System Restore".

When working in Windows 7, serious errors can occur, after which the operating system simply stops starting in normal mode. However, this is not a reason to get a Windows boot disk out of a dusty corner to reinstall it. Win 7 has in its arsenal the Recovery Environment - a powerful tool that will help restore the previous state of the operating system, avoiding the loss of data on your PC or laptop. In addition, other tools for resuscitation of Win 7 are available to users.

Windows 7 System Recovery Methods

You can revive Win 7:

• using a restore point;
• using safe mode;
• through the command line;
• through the Recovery Environment;
• using a disk with the image of Win 7;
• using the Win recovery disk.

Rollback to a restore point from under Windows

If the OS boots normally, but you want to restore it to a previous state using a restore point, do the following:

Restoring the operating system to a restore point will allow you to remove the software that caused the PC to malfunction, undo unwanted changes, and return back to the state of the operating system when everything worked correctly and booted properly. And last but not least: no data loss will occur, and all your recent documents will remain in place. Some files may remain duplicated by slightly changing their name. You can delete unnecessary copies of these files yourself.

Note: This process is completely reversible. If necessary, you can cancel it and restore the Windows 7 system using another point.

Rolling back the operating system in safe mode

This Windows 7 system recovery method is almost identical to the previous one. It is used in situations where Win does not start in normal mode:

Starting Win 7 Recovery from Command Prompt

In some cases, when Win 7 does not start in any mode other than safe, the following method helps: restore the Windows 7 system using the command line. You can execute it like this:

Rolling back the OS state through the Recovery Environment

The Windows 7 recovery environment includes 5 tools that offer the PC user various ways to troubleshoot problems related to the health of a computer running Win 7. It is created automatically in a hidden partition. This happens when you install Win 7, be it "Maximum" or any other version.

To restore Windows 7 with this method, do the following:

Note: The first step is to start the OS with Last Known Good Configuration.

The operating system automatically remembers the parameters of the last successful start of the PC in normal mode and applies them when this option is selected. As a result, you can quickly regain access to the system without the slightest loss of data. If this method helps the PC user solve the problem, the question "How to roll back the Windows 7 system?" immediately stop worrying you.

Restoring Win 7 using an image disk

This Windows resuscitation method will allow you to return the lost functionality to the operating system, even if it categorically refuses to start in safe mode. You will need a bootable DVD with the version of Win 7 you have installed. If there is no OS image on the PC, create it yourself. To do this, go to the control panel and select the "Archive computer data" item. Then select the item indicated in the screenshot below and follow the instructions.

Restoring Win 7 using a recovery disk

If, by pressing the F8 button, you did not find the line "Troubleshooting your computer" in the list, restoring Windows 7 using the system recovery disk will help. This happens if the user accidentally deletes the recovery environment partition, which is located in the Recovery directory of the system local drive. Do you think it remains only to remove Win 7 and install it again? This is not necessary - changes can be undone without having to reinstall the OS.

When working with a computer, failures often occur. Some of them can lead to bad consequences, up to a complete system failure. To fix this problem, you need to perform a system rollback. In this article, we will tell you how to rollback windows 7 system to a specific date. It is quite realistic to perform such actions and there is nothing more than natural in this.

Causes There are many reasons for this. First of all, it is the incompetence of the user himself. Knowledge about the computer and working with it is not enough, but the desire to delve into a folder called windows, where all information about this system is stored, takes over. There are situations when, due to inexperience or negligence, the necessary data is deleted and, starting from the first reboot, the computer stops working.

The second reason is viruses. The computer is constantly exposed to a significant number of virus attacks, and viruses can easily enter the system. This should never be forgotten, especially when working with the Internet.

Restoring using system tools It is quite possible to restore the system using a standard program, if, nevertheless, the reason is not a virus damage to the operating system. Before rolling back, you need to check your computer for virus infection. If this is the case, then the system just needs to be cleaned. After the complete removal of all virus programs, you can begin to roll back the system.

Actions begin by entering the Start menu. Next, you need to click on the line "All programs" and find the section "Standard". Having opened the section, click on the "Service" folder. In the menu, select the "Windows 7 System Restore" section. After that, the system will check the computer for several minutes and open the system recovery program. In the pop-up window, select the date to which you want to roll back. Then click "Next" and wait until the computer restarts.

It is worth noting that the system cannot be rolled back for a certain time, since for this you need to create restore points. To successfully complete the process, you must ensure that the computer system itself has the ability to create restore points. This feature is usually enabled by default when the computer is factory set. In addition, there are programs that allow you to create such points yourself.

Rollback using disks This method is used in cases where an attempt to rollback using system tools was not successful. To do this, you need a recovery disk. It is necessary to insert the media after turning on the computer and load the first queue. Further, you just need to sequentially execute the commands according to the instructions that appear on the screen. That's it, the system rollback is done!

Conclusion Now you know how to roll back the windows 7 system to a specific date. It is advisable to create a restore point yourself before installing each program or check if it exists at all. Thus, you can avoid serious consequences by retaining the previous settings and programs installed earlier.

noblefox.ru

How to rollback windows 7 system

Each of us, in the course of using a computer, faces various problems, this simply cannot be avoided. Someone catches a virus, someone has a program crash, or even a system crash, problems can be described for a long time. Everyone copes differently, someone calls specialists, someone is looking for a suitable antivirus, or reinstalls something. But the easiest way is to roll back the system to a date before the problems.

A system rollback will restore system files to the date the restore point was created, and programs installed after will be removed from the system. Documents, files, music, movies will not be affected. Therefore, I recommend creating them manually from time to time. The operating system itself creates them once at a certain time and before installing programs that can affect system files.

And so click start - all programs - standard - service - system restore

System Restore will start, click Next

In the next step, you will see all the current restore points, if you need everything at all, including the old ones, then check the box next to the “Show other restore points” item. Then select the desired restore point and click next. Please note that there is a description for each restore point, sometimes it is very useful. (for example, "The point was created before the installation of such and such a program")

In the next step, confirm the decision by clicking on the "DONE" button

ya-computer.ru

How to restore the system to an earlier date?

In this article, I will talk about how to restore the working state of the operating system if any problems have begun in the system.

Sometimes it happens that after installing an unknown program or updating a driver, the system starts to work incorrectly or stops starting altogether.

In most cases, such problems are solved by restoring the system to an earlier date.

That is, before installing some programs or drivers, a restore point is created or updated on the system partition of the hard drive. This is done so that you can roll back the system in case of problems.

If suddenly the system started to work incorrectly, then first you should use the last known good configuration or safe mode. Here is how to do it.

If the first method did not help, then you need to perform a system restore.

How to restore the system?

After installing the operating system, recovery is enabled by default. Turning it off is highly discouraged, because if there are no restore points, you will have to reinstall the OS in case of malfunctions ...

In order to enter the system recovery menu, you first need to open the control panel and select Recovery. If you have windows 7, then system restore is located both in the control panel and in the Start / All Programs / Accessories / System Tools menu.

The following window will appear:

Creating a recovery disk - recording the operating state of the operating system on a flash drive or DVD. A useful thing that will help restore the stable operation of the system even if it cannot be started. Restoration is performed by a bootable image.

Start System Restore - undo all actions performed on the system and restore the last working state until the OS was affected by any application or user action.

At startup, a window will appear with a selection of previous dates and times when the system was working normally. In order to restore, select the date you need and follow the path - next. You will have to wait a little while until the system is rolled back.

Also, you can see which programs may be affected after recovery.

System recovery settings

In the settings, you can choose on which partitions recovery points will be created, the amount of disk space for creating points, and directly creating a point right now.

When you click the Customize button, you will be given the choice between enabling or disabling recovery (of course, it is recommended to enable it), as well as a choice of disk space.

You can leave the default size or choose a larger one (for better effect). After that, space on the C: / drive will be reserved and will be filled as required.

You can also see the space taken by the restore point.

If it is not possible to boot the operating system, then insert the installation disk with the OS and preload it (it must be set in the BIOS in the BOOT CD-DVD ROM section first in the list, otherwise the disk will not boot, but the OS will boot. The first in the list should be stand an optical drive or a flash drive, and the second is a hard disk drive (HDD)). After loading the disk, in the initial window for installation, there will be a “System Restore” item at the bottom. This menu will be similar to the one described above.

pc-optimize.ru

How to create a restore point in windows and roll back the system

Regularly working with a computer, there is a high probability of "catching" a virus that will affect the stability of the operating system. If removing all antivirus threats and uninstalling recently installed programs and drivers did not help, you will have to use the Windows 7 system rollback.

Today I will tell you about several ways how to do it. Don't think it's hard. Any novice user can handle it.

What is a rollback point?

A rollback point (TO) or a recovery point (TV) is a version of the Windows OS hidden in an archive (What is data archiving). It can be used in the future to restart computers. TO is created either automatically by the system (after each installation of new software or drivers), or independently by the user. Without a Windows restore point, this process cannot be performed.

We create TO for our own safety

If you do not want to worry about the safety of your own data, create a TV before installing new programs and drivers and if you plan to make changes to the registry or BIOS configurations. To create a backup archive, you need to follow a few simple steps. This is done in a few minutes.

Click the "Start" button (located at the bottom left of the screen) and follow the path: "Computer - Properties - System Protection". The following should open:

Through this window, not only the creation of maintenance takes place, but also the direct restoration of the operating system. Before starting, check that protection is activated on the system drive. If it's not there, click the "Configure" button. A window will open in which you need to select the desired partition and the amount of memory that will be allocated for backups (3-5 GB is enough).

Now let's move on to the process of creating a restore point. As many of you have already guessed, it begins with the click of the "Create" button.

Enter a description in the box that opens. For example, if you plan to install the program "Example", you can specify its name. If it comes to a rollback, this will make it easier to navigate. It should be noted that TO can be stored in a computer from several weeks to several months. Therefore, if you created it a few days ago, you can easily use this point.

We carry out a rollback through the "Start" and "Run"

If your computer has stopped working stably, but starts up, then you can restore it directly from the windows interface. First you need to open the system utility. This can be done in two ways.

The first is to go to "Start" and type "restore ..." in the search bar. An issue will appear where you need to select the "System Restore" application. The second is through the command line. To open it, press the key combination Win (located between CTRL and ALT) + R. In the line, type "rstrui.exe" (without quotes). When using any method, the desired program will open, which looks like this:

The list of available restore points will appear on the next page. Choose the one you need (be guided by the description and date of creation).

At the final stage, you need to select the system disk and click the "Finish" button. Another window will appear. In it, click "Yes". The next few minutes will roll back. It will end after system reboot. Information about the end of the return of the previous settings should appear on the desktop that opens. If no change has occurred, try repeating the process but with an older TV.

Using Last Known Good Configuration

If the malfunction is so critical that the operating system does not start, you will have to use this method. In fact, it is the simplest one. It is necessary to carry out a minimum of actions to return your PC to working capacity.

Reboot the PC and, after loading the BIOS (when the start screen picture ends), press the F8 key several times (located at the top of the keyboard above the standard numbers). This will open the page for selecting additional OS startup options. Here you should select the Last Known Good Configuration option.

If everything is fine, then stable operation will be resumed. When restarting the computer again after selecting the above item and returning to the previous black screen, you must use the method that I will describe below.

Activate "Safe Mode" to roll back Windows

If the methods described earlier did not help, use this one. Start the reboot again and press the F8 key several times after activating the BIOS. You will see the already familiar section with a black background, where you need to select "Safe Mode":

The system will start, but with serious restrictions. I will say right away that it will not work to interact with many applications, since this mode is intended for system actions (in particular, for rollback). Run the System Restore utility, as we did in the first method. Only here in the first step you need to select TO manually:

Further, the algorithm of actions is already familiar: select the desired point and system disk and agree to all subsequent conditions. After the reboot, the correct operation of the Windows OS should resume. But provided that you created a backup copy before the problem occurred.

We roll back the system with the installation disk and to the factory settings

Go to this method if the previous ones did not help. To use it, you must have a flash drive or a disk with windows of the required version on hand, I already told you how to burn a boot disk image earlier. That is, if you have a "seven" and a disk with a "ten", then you will not be able to roll back from 10 to 7. To start, insert a disc or USB flash drive, restart your computer. After activating the BIOS, press F9 or F11 several times.

The Windows installer should start. On the start page, click on the "System Restore" button.

A well-known utility will start, where you need to select a restore point, system drive and agree with all subsequent warnings. There is an option to reset to factory settings. But it depends on the features of the PC and the installer. You can do this at the stage of choosing a recovery tool (see the screen above):

In the next step, select the first item:

Once the process is complete, the computer will restart and you will have to re-configure the system. It is worth noting the main disadvantage of this method - after it all files on the hard disk will be deleted. Don't forget to save them to the cloud.

Of course, it's better to never encounter something like this, but no one is immune from the activities of modern hackers. If you want to protect yourself from modern threats, use the Dr.Web Security Space 11 antivirus program. You can buy it in the large online software store AllSoft.

Now you know where the tools needed to roll back windows 7 are located. With this knowledge, you can easily restore the correct operation of your computer if any problems arise. My post for today is coming to an end.

If the user has some kind of problem with the computer (which usually happens as a result of recent changes in the OS or a virus infection), do not rush to reinstall it. The first, and often helpful, action is to roll back the windows 7 system. What does this mean? This means returning to the previous state of the OS and restoring its settings and system files to the moment when there were no failures in the computer.

Rollback points

Rollback Points (TO) or in another way restore points (TV)- this is what the Windows 7 system is rolled back from in case of any malfunctions in its operation. Anyone can ask where they come from. And they are created in two ways:

• They are created automatically by the operating OS itself;
• They are created by a person who cares about the "healthy" state of his computer.

The OS independently creates the TV when critical changes are made to the OS, for example, when installing new software (programs and drivers).

This process cannot be controlled, so further we will consider only the actions of a reasonable user to maintain a healthy state of his computer.

Getting TV by the user

Any person who is thinking about maintaining the health of their pet should be advised to create new TVs in the following cases:

• Before installing any new software;
• Before changing critical OS parameters (for example, operating modes of audio and video drivers, changing BIOS settings, etc.);
• Before editing the OS registry;
• Before cleaning the OS, any of the programs that perform this action.

To create a TV (both your own and automatic), you need to perform a series of actions.

We press "Start", right-click "Computer", then "Properties", then "System Protection", a window of this kind appears:

This is a multifunctional window with which you can manage both the creation of TV and the restoration from the previous TO. The first thing to do is to make sure that the protection function is enabled on the system disk, that is, the possibility of obtaining TO and TV and recovering from them. If it is not enabled, then you will have to click "Configure" and in the pop-up window specify the disk for which this protection function is needed, and the size of the area allocated on it for creating TO.

Creating a TV in this window is done by clicking "Create", while the following window is displayed:

in which it is necessary to give a description of the TV being created (for example, "Before reinstalling the AUDIO driver") and click "Create". After a short time, the OS will complete receiving the TV and display a corresponding message in which you must click "OK".

The total size of such points is difficult to predict (especially when they are automatically created), so you should set the size of the TV area within reasonable limits, for example, within a few GB, depending on the total size of the OS boot disk.

Rollback to the previous state

This action is performed in the same window in which the TV was created, only now you need to click the "Restore" button. When pressed, a window appears:

which contains a list of previously created TV. Usually in this list only one automatic TV created by the OS is issued. To see the full list, you should check the box "Show other restore points" in this window. After that, their complete list will be displayed, which is shown in the figure.

In this window, you need to select the appropriate TV and click "Next". Then the system will restore its state with the specified TV, reboot and display a message confirming the completion of the task, which should be answered by clicking "OK".

Other recovery methods

There are several other ways to solve this problem:

• If the OS does not boot and it is impossible to roll back in the way already described, then this can be done if you boot in safe mode;
• Use TVs created by third-party programs, such as Acronis True Image Home, but this requires you to install it and run this program to create another TV. This will take some time, depending on the speed of the system.