Windows (windows, system) does not see the flash drive, WPD driver error. wpd file system volume driver wpd file system volume driver error

World renowned developer and supplier computer cases, power supplies and other components, the Aresze company announced the start of deliveries of its new power supply to the CIS countries. The novelty with the code name EPS850ELA stands out for its outstanding characteristics in terms of performance and reliability. According to Aresze representatives, it can provide stable power to all connected components via several +12V lines at once, thereby increasing overall performance systems.

The Aresze EPS850ELA power supply is compatible with …

Announcements motherboards based on the Z87 Express chipset from Intel began to appear long before the official release of the product. Asus was no exception and presented whole line motherboards on the new platform, including the flagship model of the TUF series - Sabertooth Z87. Like other models on this chipset, the new product supports 4th generation Intel Haswell processors. Its main difference from competitors' products is premium element base and an advanced protection system against any negative effects (voltage drops, overheating), including ...

NEC is preparing to release new monitor MultiSync line - model EA274WMi. The novelty with a screen diagonal of 27 inches and an aspect ratio of 16:9 will delight consumers with ultra-high resolution WQHD (2569x1440 pixels). Use of economical LED backlight positively affected the design and thickness of the screen, as well as the level of energy consumption. The monitor will appear on the shelves before the end of this month at a price of about $799.

Model NEC MultiSync EA274WMi is built on a matrix type IPS, which provides excellent viewing angles (178/178 degrees in both ...

I ran into a problem the other day, I wrote the WinXP image to a USB flash drive through the program and in the process the file system from the USB flash drive flew off. The flash drive is no longer displayed in the explorer. Connected to another computer, same problem.

I started looking on the Internet how to restore the file system, since the standard Windows tools do not see anything at all and do not want to do anything. UltraISO sees the flash drive, but does not format.

In general, I also did not find sensible advice on the Internet, so I resorted to a proven method, the Partition magic program. The program is good, but slightly blunt, and even requires a reboot after installation, so I didn’t want to mess with it.

You will not be able to format, you need to create a disk. Click create, select a file system, and off you go. Everything would be fine, but I had another problem, I don’t remember verbatim, the essence of the problem was “it is not possible to perform this operation in 64bit Windows”. In general, as I said, the program is blunt.

With the help of this program, it was not possible to delete partitions ... I tried to delete it with Acronis, but he did not even see the USB flash drive. And in general, most modern programs working with the file system are buggy to the point of impossibility, constantly some kind of errors and failures occur in the process.

I had to resort to a completely old-fashioned proven method. Previously, when installing WinXP, a full-fledged function for deleting, creating and formatting partitions, up to full formatting, was built in. In modern Win, this function is plywood, it only pretends to do something, a kind of snag for the system so that it can start installing Windows. In fact, if you have a problem with the file system, then the built-in function of modern Win will not help at all. Therefore, once in a century, it is useful to have a friend Hrihu.

In general, it was possible to delete partitions, but it was not possible to create a disk, since the system is old and does not support working with removable media, which it reported when trying to create a partition.

I did the following, went back to Partition, clicked create a disk and voila, no errors, the system stood up like a glove. But since we work with Win, everything is never as simple as we would like.

In general, the flash began to be seen on other computers, but on the one on which the failure initially occurred, it was still not seen by the system. Exclamation mark in device manager WPD file system", the problem is clearly with the driver.

Solution: Click on "Start", then right click click on "My Computer", then "Properties" and open the "Device Manager". Click on the device exclamation mark, which has "WPD" in its name, right-click, then "disable". (A postscript about WPD is in case you have any other failed devices that do not need to be disabled)
Click on "Start", then right-click on "My Computer", then "Manage".

We do the following, right-click on the USB flash drive and select "Change drive letter ..."

Click add, select the drive letter that you like and click OK (or apply, I don’t remember)

By the way, I want to note that after all these intricate manipulations, the program for writing WinXP to a USB flash drive worked as it should and the image was successfully transferred to the flash drive. UltraISO does not correctly transfer XP to a flash drive, unlike the Seven. Therefore, I used the software WinSetupFromUSB1.6. You can easily find instructions for use on the Internet.