Legislative base of the Russian Federation. Legislative base of the Russian Federation New form 4 ter statistics

Active Edition from 20.07.2009

Order of Rosstat dated July 20, 2009 N 146 "On approval of guidelines for filling the forms of federal statistical observation N 11-TER" Information about the use of fuel, heat and electricity for the production of individual types of products, works (services) "and application to form N 11-TER "INFORMATION ON THE FORMATION AND USE OF SECONDARY ENERGY RESOURCES", N 4-TER "INFORMATION ON THE RESIDUE, INCOME AND CONSUMPTION OF FUEL AND HEAT ENERGY, COLLECTION AND USE OF WASTE PETROLEUM PRODUCTS"

II. Filling in the indicators of form N 4-TER

Section 1. Residues, receipt and consumption of fuel and heat

6. In the lines "Aviation gasoline", "Automotive gasoline", "Diesel fuel", all brands and grades of the specified oil products in tons are taken into account. These lines do not include special gasolines (gasoline for the chemical industry, solvent gasoline, straight-run gasoline).

Of the total amount of motor gasoline and diesel fuel, separate lines 1012 and 1032 in column 3 "Consumed during the reporting year - total" show the volume of these petroleum products spent on the operation of vehicles. Gas consumption for the operation of road transport is also given in lines 1092 and 1151 from the total volumes of gas consumption of combustible natural (natural) and hydrocarbon liquefied gases. Fuel consumption by specialized vehicles mounted on automobile chassis (mobile cranes, fire engines, sanitary vehicles, vehicles for urban utilities, etc.) is not reflected in these lines.

The line "Kerosines" reflects all types of kerosene - aviation (fuel for jet engines), lighting, tractor.

If an enterprise records motor gasoline, diesel fuel, liquefied gas in liters, then when converting from volume units to weight units, their actual density (specific gravity) measured using oil densimeters during the accounting period should be used.

To do this, the number of liters must be multiplied by the actual density, the result obtained divided by 1000. In the absence of oil density meters, the conversion from volume units to weight units should be made using the weighted average density calculated for the reporting period. For the calculation, the densities indicated in the waybills for each batch of the corresponding oil product received by the enterprise are taken.

The weighted average density is determined as follows.

For example, during the reporting period, the enterprise received three batches of gasoline: batch I - 2000 tons with a density indicated in the consignment note equal to 0.72; II batch - 5000 tons - 0.74; III batch - 8000 tons - 0.735. Thus, the company received 15,000 tons of gasoline during the reporting period.

Based on the indicated density, we determine the amount of motor gasoline supplied to the enterprise in volume units:

Organizations that do not have the above information can convert fuel volumes from liters to tons using average density values.

Separate density averages for:

motor gasoline:

A-76 (AI-80) - 0.715 g / cu. cm, AI-92 - 0.735 g / cu. cm, AI-95 - 0.750 g / cu. cm, AI-98 - 0.765 g / cu. cm;

diesel fuel: summer - from 0.83 to 0.85 g / cu. cm, winter - from 0.8 to 0.83 g / cu. cm, arctic - from 0.8 to 0.82 g / cu. cm.

The line "Domestic furnace fuel" provides data on petroleum products obtained from diesel fractions of direct distillation and secondary origin, used mainly in domestic heating installations.

The line "Fuel oil" contains data on furnace fuel oil grades 40 and 100, fuel oil for open-hearth furnaces, process export fuel (TU 38.001361-87).

The line "Fleet fuel oil" contains fuel oils of grades F-5 and F-12.

The line "Combustible natural gas (natural)" lists all natural gas - natural gas from gas, gas condensate, oil fields, as well as processed gas - dry gas from gas processing plants (lean gas and desulphurization gas).

Gas obtained at the enterprise as a result of processing oil, gas condensate (gas from dry refineries), and liquefied gas is not reflected in this line.

If the reporting organization used coal, firewood or peat for the production of generator gas, then the consumption of the generator gas they received is not reflected in the report in the form N 4-TER, but the direct consumption of fuel spent on its production (coal, firewood, peat) is given.

The exceptions are organizations that use generator gas produced during the production of semi-coke. These enterprises must reflect the movement of the specified gas in the line "other types of fuel" in terms of conventional fuel.

The line "Combustible artificial coke gas" gives the amount of gas obtained in the process of coking, rich gas obtained at nitrogen-fertilizer plants and chemical plants after the selection of the hydrogen fraction from coke oven gas and returned by them to coke-chemical enterprises.

The amount of coke oven gas as well as recovered rich gas must be shown in thousands of cubic meters converted to 4000 kcal/cu.m. m.

This line also provides information on other off-gases (excluding off-gases from metallurgical production).

The line "Combustible artificial blast-furnace gas" shows the amount of gas obtained in the blast-furnace process. The amount of blast-furnace gas must be shown in thousands of cubic meters, reduced to 1000 kcal/cu. m.

This line also provides information on other waste gases from metallurgical production.

The line "Dry refinery gas" shows the consumption of only dry refinery gas or gas condensate (including the amount flared at refineries). Gas from oil refineries obtained in liquefied form is accounted for in the "Liquefied gas" line.

On the line "Liquefied gas (liquefied hydrocarbon gases)" the following fractions of liquefied hydrocarbon gases are given: technical butane, butane-isobutane, isobutane, normal butane, propane, technical propane (PT), propane-butane-pentane fraction (other liquefied gases), mixture of technical protane and butane (SPBT), protane-butane and protane-propylene fractions. Other types of liquefied gases, if they are used as fuel, are reflected in the line "Other types of fuel".

The line "Coal and coal processing products" contains coal, coal concentrate, middlings, sludge, screenings, coal briquettes used at the enterprise as fuel, raw materials for production, for non-fuel needs.

In order to avoid double counting, coal directed for enrichment to obtain coal concentrate, middlings, sludge, screenings, coal briquettes is not reflected in the report.

Coal concentrate, middlings, sludge, screenings, coal briquettes are included both in the total volume of coal and products of its processing (line 1160), and in the volume of coal of the corresponding basin or deposit.

Organizations consuming coal and products of its processing, in free lines (after line 1160) of the report, provide data on the volume of coal consumption by basins and deposits, in the sequence specified in Appendix N 1 to this Direction, with an entry in column A - names of coal, B - number of the line corresponding to it.

Organizations producing coke, semi-coke, etc., must extract in a separate line, the volumes of coal used for coking - "including for coking".

According to line 1630, lignite coal is also allocated from the total amount of coal available at the enterprise.

Brown coals in full include Moscow region (line 1230), Chelyabinsk (1270), Bashkir (1290), Kansk-Achinsk (1380), Raychikha (1410), Chita (1350) coals.

Of the Sverdlovsk coals (line 1280), brown coals include the coals of the Bogoslovsky and Volchansky deposits, from the Yakut (1320) - Kangalassky, from the coals of Primorye (1490) - all, except for the coals of the Lipovetsky and Partizansky deposits.

Coal Gusinoozersky (line 1360), Sakhalin (1430), Kamchatka (1480) can be partly stone, partly brown.

Coal from deposits not specified in Appendix No. 1 of this Procedure is accounted for in the line "Coal from other deposits" (1500).

Lines 1161 and 1631 provide data on coal and its products and brown coal in tons of standard fuel, respectively.

Recalculation of fuel from physical terms into conventional fuel of coal equivalent should be made by multiplying the data of this fuel in physical terms (tons, cubic meters, etc.) by the corresponding caloric equivalent (conversion factor). The values ​​of caloric equivalents are determined on the basis of periodic measurement of the calorific value of the fuel in the laboratory. If it is not possible to determine the calorific value in this way, then to recalculate the fuel into conditional, it is necessary to use the appropriate this species fuel caloric equivalent specified in Appendix No. 2 to this Instruction.

In the lines "Fuel milling peat", "Lump fuel peat" and "Peat (fuel) briquettes and semi-briquettes", the data are given in terms of relative humidity: milled peat is reduced to 40% moisture content, lumpy peat - to 33%, peat briquettes - to 16%, peat semi-briquettes - to 28% humidity.

Recalculation of all types of peat and peat briquettes and semi-briquettes from actual to conditional humidity is carried out according to the following formula:

P_cond - weight of peat (briquettes and semi-briquettes) in terms of relative humidity in tons;

P_fact - weight of peat (briquettes and semi-briquettes) of actual moisture content in tons;

V_fact - actual moisture content of peat (briquettes and semi-briquettes) in percent;

V_cond - conditional moisture content of peat (briquettes and semi-briquettes) in percent.

For example, in the reporting year, the enterprise received 1500 tons of sod peat with a moisture content of 70%, the weight of sod peat in terms of conditional 33% moisture content will be:

The line "Slates" reflects the volumes of oil shale - Leningrad, Kashpir (without processing, sorted and enriched).

The line "Metallurgical coke, coke and coke breeze" gives the entire volume of blast-furnace and foundry coke with a piece size of 25 mm and more, dry coke nut - 10 - 24 mm and dry coke breeze - 0 - 9 mm.

This line also reflects grizzly waste obtained during coke sieving.

Dry metallurgical coke, as well as coke nuts and fines are given in terms of dry weight.

For example, if coke breeze has a moisture content of 10%, then its natural weight must be multiplied by 0.9, that is, its dry weight, reflected in the report, will be 90% of its natural weight.

The line "Firewood for heating" reflects data on the volume of firewood purchased in wholesale trade, received from the self-produced reporting organization or purchased from other suppliers. This line also includes hardwood commercial wood of low-value commercial assortments, as well as low-quality commercial wood converted into firewood according to the act.

The volume of firewood purchased for fuel purposes, but used for non-fuel needs - for the manufacture of various products (tare board, shavings, etc.) for own needs, technological chips or containers, - is reflected in line 1690 "Firewood for heating".

Waste from logging and woodworking (boughs, needles, chips, wood trimmings, shavings, sawdust, bark, stumps), as well as dismantled unusable sleepers used as fuel, a mine rack, communication poles, wooden containers, logs of dismantled old buildings, etc. ., used by the organization both for fuel purposes and sold to the population, workers and employees, are not reflected in the line "Firewood for heating", but are shown in line 1730 "Other types of solid fuel" in terms of conventional fuel.

Firewood volumes should only be given in dense cubic meters. If the organization records firewood in storage cubic meters, then it is necessary to convert it into dense cubic meters by multiplying their volume in storage cubic meters by a factor of 0.7.

The line "Other types of petroleum products" provides data on all petroleum products not listed in lines 1001 - 1060, which were used during the reporting year as fuel (motor or boiler-furnace). Inclusion in the report of data on the use of other types of petroleum products as raw materials or for non-fuel needs is not allowed. Information about the residues is given only for those volumes of these petroleum products that are intended for use as fuel in this organization.

If the enterprise used oil as fuel, then its movement should also be shown in line 1700 "Other types of petroleum products" (1700) in terms of conventional fuel, as well as in line 1720. Oil used as raw materials, in the report in form N 4 -TER is not taken into account.

The line "Other types of solid fuel" provides data on all types of fuel (in terms of standard fuel) not listed in lines 1001 - 1720 of form N 4-TER received and used by the organization for fuel purposes.

Other types of solid fuels include - industrial waste, including solid and liquid secondary energy resources, domestic waste, other types of natural fuel (peat chips, straw, reeds, brushwood, fires, corn stalks, husks, logging and woodworking waste, and also dismantled wooden sleepers used as fuel, a mine rack, communication poles, wooden containers, logs of dismantled old buildings, etc.).

The line "Heat energy" contains data on the consumption of heat directly in this organization, regardless of whether it is produced in this organization or received from outside.

The volume of heat energy consumption does not include losses of heat energy in heat networks (main, cities and towns).

In cases where, under the terms of the agreement, the tenant makes a payment to the lessor of the premises, which includes the cost of consumed heat energy, the information on this heat consumption in the form is reflected by the landlord.

In cases where an organization that does not have heat energy meters produces heat energy and all heat energy is consumed in this organization, the volume of heat energy consumption is determined by calculation.

The volume of produced heat energy is equal to the volume of its consumption and is determined by:

for that produced in heating boilers - by the volume of fuel used for this purpose and the specific consumption of this fuel per unit of released (produced) heat energy. Information on the value of this specific consumption can be obtained from the territorial office of Rosstat;

for produced in electric boilers - by multiplying 1 MW of electric boiler power by 0.86 Gcal and the number of hours of operation of this electric boiler.

7. Columns 1 and 9 "Balance at the beginning of the reporting year" and "Balance at the end of the reporting year" provide information on the availability of fuel at the beginning and end of the year, respectively, at all general factory, intermediate, workshop and other warehouses of the organization, including departmental warehouses, warehouses auxiliary industries, municipal and cultural enterprises, housing and communal departments, in other places of fuel storage (own and rented), as well as its residues in bunkers, tanks, car tanks, measuring tanks, pantries, at construction sites, near boilers, industrial aggregates, in stacks, on ships at berths, on wharfs, in ports and harbours, in locomotives in railway depots.

The residues of liquid petroleum products (fuel oil, diesel fuel, etc.) include the entire volume of fuel in the tanks, including the one that cannot be drained ("dead" residues).

The remaining fuel written off for production, construction, agricultural or other needs, but not actually used, must be taken into account in the total balances at this enterprise at the end of the reporting period. This should also include the balances belonging to this enterprise, stored for some reason at another enterprise; about the size of these balances, it is necessary to make an appropriate note at the end of the report indicating the name and address of the custodian organization.

An organization that, at the end of the reporting period, stored fuel owned by other organizations and listed on off-balance accounts, the volumes of such fuel are not included in the report of this organization. This fuel is reflected in the report of the organization on whose balance sheet it is listed.

Fuel that is in responsible storage (state reserve and mobile reserve), as well as fuel residues on transport vessels (except for fisheries), diesel locomotives, which are on voyages as of the date of the report, are not included in the balance.

Also not included in the balance is fuel that arrived at the final railway station on the date of the report and is in wagons or tanks owned by railway, documents for which have been received and the invoice has been paid, but the fuel has not yet been credited to the accounting department.

Organizations - consumers of fuel, which are at the same time its producers, in terms of fuel of their own production (extraction) give only consumer fuel residues, that is, fuel residues intended for consumption in this organization and for sale to the population, their workers and employees. Commercial balances of fuel intended for sale to other organizations are not taken into account. Residues of fuel purchased from other organizations are accounted for in full.

8. In column 2, organizations - consumers of fuel and organizations involved in its implementation, provide the entire actual volume of fuel received for the reporting year.

Consumer organizations that are at the same time its producers, in column 2, in terms of fuel of their own production (extraction), provide data only on the amount of fuel produced by them, which was used for their own needs, sold to the population (their workers and employees) or went to increase consumer balances fuel at this plant. Fuel purchased from other organizations is accounted for in full.

Column 2 does not reflect the fuel received for laying in the state reserve, paid not from the funds of the reporting enterprise and accounted for by the accounting department on off-balance accounts.

9. Column 3 shows the entire actual fuel consumption at the enterprise, including losses in technological processes, when converting it into other types of fuel or energy, as well as the losses and shortages during storage and transportation issued by the relevant acts.

When filling in column 3 of the form by nitrogen-fertilizer plants and agrochemical enterprises in the line "Combustible artificial coke oven gas", it must be borne in mind that this column records the consumption of coke oven gas for production, technological and other needs, minus the volume of rich gas returned to the coke oven chemical enterprise.

For example, an agrochemical enterprise received 10,000 thousand cubic meters in the reporting year. m of coke oven gas (reduced to 4000 kcal / m3). As a result of its use for production and technological needs, in addition to the main product, rich gas was obtained in the amount of 3,000 thousand cubic meters. m with a calorific value of 6000 kcal / cu. m. Its amount, reduced to 4000 kcal / cu. m, will be:

Which is returned to the coke plant, which should be noted in the note to the report.

The enterprise of agrochemistry in the report in the form N 4-TER on the line "Combustible artificial coke oven gas" (reduced to 4000 kcal / cubic meters) in column 2 will show 10,000 thousand cubic meters. m, in column 3 - 5500 thousand cubic meters. m, in column 4 - 4500 thousand cubic meters. m.

The coke-chemical enterprise on the line "Combustible artificial coke oven gas" in column 2 will show the volume of gas returned to it in the amount of 4500 thousand cubic meters. m.

Road transport enterprises include in their report on columns 3 and 4 data on the amount of motor gasoline and diesel fuel consumed both for their own needs and for servicing third-party organizations; vehicles leased from individuals or small businesses; in case of on-farm rental of vehicles by employees of the enterprise (labor relations associated with it).

Agricultural enterprises that involve vehicles of other enterprises and organizations for harvesting, the amount of fuel consumed by these vehicles is shown in columns 2, 3 and 4.

10. From the total consumption total (column 3), fuel consumption data are highlighted as:

a) motor (column 4) - petroleum products, liquefied and compressed gas used in internal combustion engines - automobile, tractor, agricultural, aircraft engines, marine engines, river vessels etc.; this column also takes into account fuel consumption in chainsaws, units for pumping oil, oil products and gas;

b) as raw materials (column 5) - fuel resources used as raw materials for the production of chemical, petrochemical or other non-fuel products, i.e. the above-mentioned products were produced from this type of fuel. This column does not reflect the amount of fuel used for the production of other types of fuel, with the exception of coking coal used for the production of coke; fuel peat - for the production of peat briquettes and semi-briquettes;

c) for non-fuel needs (column 6) - fuel resources used as material for non-fuel needs. For example, coal used as an additive to clay solutions during oil drilling, as well as a filter agent; gas injected into the reservoir to maintain reservoir pressure; fuel peat used as a heat-insulating material and for fertilizer; firewood used for the production of a container board; oil used for flushing wells; fuel oil used as a lubricant, kerosene used for washing parts, etc. This column also provides information on the consumption of coke used as a reducing agent in the blast furnace process.

Data on the consumption of fuel resources used directly as boiler and furnace fuel (by its combustion) in the production of electricity and heat at power plants and boiler houses, to create the necessary temperature regime in technological processes, are reflected only in column 3. For coke, data are provided only on its consumption as boiler and furnace fuel.

The volume of consumption of boiler and furnace fuel is determined as follows: gr. 3 - (gr. 4 + gr. 5 + gr. 6).

11. If the reporting enterprise - the consumer of fuel from the total volume of fuel released (sold) part of it to other enterprises, then this amount is reflected in column 7 "In addition, released (sold) for the reporting year to other enterprises and organizations". This also includes fuel previously borrowed by the reporting entity from the state reserve and returned in the reporting period.

If an entity sells fuel for heating or cooking to household or other facilities that are on its own balance sheet or on the balance sheet of other entities, but located in the leased premises of the administrative or industrial buildings of the reporting entity whose needs they serve, then this fuel is considered to be sold to the outside and shown in column 7.

Organizations involved in the sale of fuel shall report in column 7 the entire volume of fuel sold by them to other enterprises and organizations.

Organizations - fuel producers - sale of fuel of their own production (extraction) to others legal entities do not appear in column 7. Fuel sold by these enterprises directly to the population or distributed to their employees, pensioners, is shown in column 8.

12. Column 8 "In addition, released (sold) to the population during the reporting year, including supplied to workers and employees" shows all the fuel sold to the population, as well as sold to workers, employees, pensioners of the reporting enterprise (organization). This column also reflects the fuel sold to homeowners' associations for the needs of the population (unless payment directly by the population for the cost of fuel consumed is provided). The associations of homeowners themselves do not submit reports in the form N 4-TER.

The amount of natural gas sold to the population is determined on the basis of invoices paid in the reporting period, based on established tariffs (when the cost of consumed gas is paid directly by the population, regardless of the form and method of payment).

If the reporting organization releases fuel to a fuel supplying organization for subsequent sale from its warehouses to the population, workers and employees (fuel is credited to the accounting department of the enterprise), then this fuel is reflected in the report this enterprise(in column 8), and not the fuel supply organization.

Internal movements, that is, the receipt and consumption of fuel in the order of transfer from warehouse to warehouse, from one workshop to another, from the pantry of a workshop to a warehouse, and other movements within the enterprise (organization) are not shown in this form.

13. This section is filled in by all enterprises (organizations) that have waste oil products, except for tank farms.

Line 1810 "Wasted motor oil (MMO)" shows the movement of used motor oils (for aviation, piston, carburetor and diesel engines), compressor, vacuum oils, oils for rolling mills, as well as industrial oils that meet the requirements of table 2 of GOST 21046- 86.

Line 1820 "Waste industrial oil (MIO)" shows the movement of used industrial oils and working fluids for hydraulic systems, gas turbine, insulating, instrument and turbine oils, oils for refrigerator compressors that meet the requirements of Table 2 of GOST 21046-86.

Line 1830 "Mixture of waste oil products (SNO)" reflects the movement of oil flushing fluids; oils used in the heat treatment of metals, cylinder, transmission; oil and liquid petroleum fuel extracted from treatment facilities and oily waters.

Line 1800 "Total" is equal to the sum of lines 1810, 1820 and 1830.

14. Columns 1 and 8 indicate the residues of waste oil products by groups and their total amount, respectively, at the beginning and at the end of the reporting year.

Column 2 shows the amount of waste oil products by groups and total collected by the enterprise (organization) for the reporting year, both from its own use and purchased on the side.

Columns 3 - 5 indicate the amount of waste oil products by groups and in total used by the enterprise (organization) for its own needs and as a raw material for cleaning (regeneration) at the existing regeneration equipment, as a component of boiler fuel, and for technological needs (lubrication of open and closed units friction, preservation, technological lubrication, lubricating-technological additive).

Columns 6 and 7 indicate the amount of waste oil products by groups and in general, sold (delivered) to tank farms, as well as for export.

If an enterprise has sold waste oil products to other enterprises, then when filling out section II, it is necessary to reduce the data in column 2 by the amount of waste oil products transferred. Under this condition, the sum of columns 1 and 2 will be equal to the sum of columns 3, 4, 5, 6, 7, 8.

If the enterprise has destroyed part of the waste oil products, then in order to maintain the balance, it is necessary to show this amount in the balance at the end of the reporting year, indicating in the note to the report the volume of waste oil products destroyed.

With the introduction of this Directive, the previously existing Procedure for filling out and submitting the form of the federal state statistical observation N 4-fuel "Information on residues, receipt and consumption of fuel, collection and use of waste oil products", approved by the Decree Federal Service state statistics dated 19.08.2004 N 36.

Department of Enterprise Statistics

1. The lines of section 1 of the form provide data on the balances, receipts, consumption of certain types of fuel and thermal energy, and, in addition, the release (sale) of these types of fuel to other enterprises and organizations and the public. The volume of fuel (thermal energy) consumption includes the volumes of losses in technological processes, when converted into other types of fuel or energy, as well as losses and shortages during storage and transportation drawn up by the relevant acts.

The lines “Gasoline for aviation for aviation piston engines”, “Gasoline for cars”, “Diesel fuel” provide data on all brands, grades and classes of environmental safety of these petroleum products in tons. Data on the volumes of straight-run gasoline, solvent gasoline and special gasolines are not reflected in these lines.

From the total volumes of motor gasoline and diesel fuel, data on their consumption for the operation of motor vehicles are allocated in lines 1012 and 1032, respectively. etc.), is not reflected in these lines.

The line “Domestic furnace fuel” provides data on the volume of petroleum products obtained from diesel fractions of direct distillation and secondary origin, used mainly in domestic heating installations.

The line "Combustible natural gas (natural gas)" provides data on the volume of natural gas from gas, gas condensate fields.

The line “Associated petroleum gas (combustible natural gas from oil fields)” provides data on the volume of natural gas from oil fields, dry gas from gas processing plants, stripped gas and desulphurization gas.

Gas obtained at the enterprise as a result of processing oil, gas condensate (gas of oil refineries), and liquefied gases are not included in the data on the volumes of combustible natural gas (natural gas) and associated petroleum gas (combustible natural gas of oil fields).

From the total volumes of combustible natural gas (natural gas) and associated petroleum gas (natural combustible gas of oil fields), data are allocated on their consumption in compressed form for the operation of vehicles, respectively, in lines 1082 and 1092. Fuel consumption by specialized machines mounted on automobile chassis (cranes on the road, fire engines, sanitary, for urban utilities, etc.), these lines are not reflected.

If the reporting organization used coal, firewood or peat for the production of generator gas, then the consumption of generator gas received by them is not reflected in the report according to the form, but the direct consumption of fuel spent on its production (coal, firewood, peat) is given.

The line “Combustible artificial coke oven gas” provides data on the volumes of gas obtained in the process of coking, rich gas obtained at nitrogen fertilizer plants and chemical plants after the hydrogen fraction is taken from coke oven gas and returned by them to coke-chemical enterprises.

The volume of coke oven gas as well as recovered rich gas should be reported in thousands of cubic meters adjusted to 4000 kcal/cu.m. m.

This line also provides data on the volumes of other off-gases (excluding off-gases from metallurgical production).

The line "Combustible artificial blast-furnace gas" provides data on the volume of gas obtained in the blast-furnace process. The volume of blast-furnace gas should be reflected in thousands of cubic meters, reduced to 1000 kcal / cu. m.

This line also provides data on the volumes of other waste gases from metallurgical production.

The line "Gas from refineries" provides data on the volume of refinery gas or gas condensate (including the amount flared at refineries). Gas from oil refineries received in liquefied form is reflected in the line “Propane and butane, liquefied, hydrocarbon gases and their mixtures liquefied, other, not included in other groups”.

The line "Dry gas" provides data on the volume of only dry gas from oil refining or gas condensate.

The line "Ethane (ethane fraction)" provides data on the volume of the ethane fraction of gas processing. This volume does not include the volume of dry stripped gas.

The line “Propane and butane, liquefied, hydrocarbon gases and other liquefied mixtures thereof, not included in other groups” provides data on the volumes of the following fractions of liquefied hydrocarbon gases: liquefied propane with a purity of at least 99% for use as fuel and for other purposes, propane-propylene fraction, propane (propane fraction, including spent propane-propylene fraction), normal butane (including spent butane-butylene fraction), isobutane (isobutane fraction), butane-butylene fraction, propane-butane fraction (household condition), propane or butane liquefied with a purity of less than 95%, used as a raw material for refineries and for the petrochemical industry, pentane (pentane fraction), isopentane (isopentane fraction), pentane-hexane fraction. Other types of liquefied gases, if they are used as fuel, are reflected in the line “Other types of petroleum products”.

From the total amount of data on this line, data on the consumption of propane and butane, liquefied, hydrocarbon gases and their mixtures of liquefied other, not included in other groups for the operation of vehicles on line 1151. Fuel consumption by specialized machines mounted on automobile chassis (cranes on automobile movement, fire engines, sanitary, for urban utilities, etc.), this line is not reflected.

The line “Coal” provides data on the volumes of coal, coal concentrate, middlings, sludge, screenings, coal briquettes used at the enterprise as fuel, raw materials for production, for non-fuel needs.

To avoid double counting, the volume of coal used for enrichment to obtain coal concentrate, middlings, sludge, screenings, coal briquettes is not reflected in the report.

Coal concentrate, middlings, sludge, screenings, coal briquettes should be included in the total volume of coal (line 1160), including the volume of coal of the corresponding pool or deposit.

Coal and products of its processing (processing) are recalculated into standard fuel, as a rule, by multiplying the volume of coal in physical terms by its actual heat equivalent (K), defined as the ratio of the net calorific value of the working state of the fuel to the calorific value of 1 kg of standard fuel, t e. 7000 kcal/kg. If organizations-consumers of this coal cannot be recalculated into reference fuel, state statistics bodies should provide them with standard coefficients for converting coal of a given basin (deposit) into conventional fuel.

The line "Fuel wood" reflects data on the volume of fuel firewood purchased in wholesale trade, received from self-harvesting of the reporting organization or purchased from other suppliers. This line also takes into account hardwood commercial wood of low-value commercial assortments, as well as low-quality commercial wood converted into firewood according to the act.

The volume of firewood purchased for fuel purposes, but used for non-fuel needs - for the manufacture of various products (tare boards, shavings, etc.) for own needs, technological chips or containers - is reflected in the line "Fuel wood".

The data on the consumption of thermal energy in line 1750 must be equal to the sum of the data on its consumption in lines 1751-1753.

If metering devices for thermal energy of hot water supply register its consumption in m3, then recalculation in gigacalories (line 1753) should be carried out according to the following formula:

DIV_ADBLOCK115">

Average annual temperature hot water in systems of centralized hot water supply should be at least 40 ° C. In the handbook of water densities, its value at this temperature is 0.99225, at 50°C - 0.9881, at 60°C - 0.9832, at 70°C - 0.9778, at 80°C - 0.9718, at 90°С - 0.9653 and at 100°С - 0.9584

2. Section 2 of the form provides data on the collection and use of waste oil products by organizations, with the exception of tank farms.

Line 1810 “Wasted motor oil (MMO)” reflects the movement of used motor oils (for aviation, piston, carburetor and diesel engines), compressor, vacuum, oils, oils for rolling mills, as well as industrial oils.

Line 1820 “Waste industrial oil (MIO)” reflects the movement of used industrial oils and working fluids for hydraulic systems, gas turbine, insulating, instrument and turbine oils, oils for refrigeration compressors.

Line 1830 “Mixture of waste oil products (CHO)” reflects the movement of oil flushing fluids; oils used in the heat treatment of metals, cylinder, transmission; oil and liquid petroleum fuel extracted from treatment facilities and oily waters.

If an enterprise has sold waste oil products to other enterprises, then when filling out section II, it is necessary to reduce the data in column 2 by the amount of waste oil products transferred. In this case, the sum of the data in columns 1 and 2 should be equal to the sum of the data in columns 3, 4, 5, 6, 7, 8.

If the enterprise has destroyed part of the waste oil products, then in order to maintain the balance, it is necessary to show this volume in the balance at the end of the reporting year, indicating in the note to the report the volume of waste oil products destroyed.

3. Section 3 of the form shows the cost of energy resources purchased in the reporting year from other legal entities and individuals (including under an exchange agreement, a commodity loan or free of charge), credited upon receipt and spent for technological purposes, the production of all types of energy (electric , thermal, compressed air, cold and other types), heating of buildings, structures, operation of agricultural machines and vehicles, transport work on maintenance of production performed by the organization's vehicles, regardless of what part of the energy resources was used (spent) in the reporting year for production and household needs or remained in the warehouse in the form of residues.

The costs of their acquisition do not include the costs associated with the acquisition of energy resources intended for resale to other legal entities and individuals.

Expenses for the purchase of energy resources are reflected at purchase prices (excluding VAT, excises and similar obligatory payments), including transportation and procurement costs associated with its acquisition; insurance costs; the costs of bringing the fuel to a state suitable for use for the planned purposes (costs of the organization for processing, sorting, packaging and improving specifications received fuel, not related to the production of products, performance of work and provision of services); other costs directly related to the purchase of fuel, as well as non-refundable taxes paid in cases provided for by the legislation of the Russian Federation.

4. Section 4 of the form reflects data on the equipment with metering devices. Metering devices for which settlements of suppliers of energy resources with consumers of energy resources are not carried out (intrashop meters) are not included in these data.

Column 1 "Total number of settlement points for accounting of energy resources" provides data on the total need for equipping (quantity) with metering devices for energy resources at settlement points of accounting for which settlements are made between suppliers of energy resources and consumers of energy resources.

Column 2 "Number of settlement metering points equipped with energy resource metering devices" provides data on the number of actually installed energy resource metering devices at the settlement metering points for which settlements are made between energy resource suppliers and energy resource consumers, regardless of the date of their installation.

Column 3 “Put into operation of energy metering devices” provides data on the number of energy metering devices actually installed and put into operation during the reporting year, according to the readings of which settlements with their suppliers are carried out.

font size

The line "Postal address" indicates the name of the subject of the Russian Federation, the legal address with a postal code; if the actual address does not match the legal one, then the actual postal address is also indicated. For separate subdivisions that do not have a legal address, a postal address with a postal code is indicated.

3. A legal entity affixes the code of the All-Russian Classifier of Enterprises and Organizations (OKPO) in the code part of the form on the basis of the Notice of assignment of the OKPO code sent (issued) to organizations by the territorial bodies of Rosstat.

For territorially separate subdivisions of a legal entity, an identification number is indicated, which is established by the territorial body of Rosstat at the location of the territorially separate subdivision.

4. Consumer enterprises, wholesale, intermediary, wholesale and intermediary organizations, organizations engaged in retail trade in fuel, in the report must provide data on all fuel actually received and spent in the reporting year for the needs of the organization, as well as sold to the population or their employees, other organizations, as well as the fuel listed in the balance.

5. Enterprises - consumers of fuel, which are also its producers, in the report in the form in terms of their own production (production) provide data on the movement of only the amount of fuel that is intended for their own technological needs (including the consumption of fuel as a raw material for processing into other types for fuel and non-fuel products), energy needs, for the operation of their own vehicles, as well as for sale to the population or their employees. Fuel of own production, sold to legal entities, is not reflected in the form by these enterprises. Fuel purchased from other enterprises is reflected in the form in full.

6. In section 1, column 3 shows the entire actual fuel consumption at the enterprise, including losses in technological processes, when it is converted into other types of fuel or energy, as well as losses and shortages during storage and transportation drawn up by the relevant acts.

7. From the total consumption total (column 3), fuel consumption data are highlighted as:

a) motor (column 4) - oil products, liquefied and compressed gas used in internal combustion engines - automobile, tractor, agricultural, aircraft engines, engines of sea, river vessels, etc.;

b) as raw materials (column 5) - fuel resources used as raw materials for the production of chemical, petrochemical or other non-fuel products. This column does not reflect the amount of fuel used for the production of other types of fuel, with the exception of coking coal used for the production of coke; fuel peat - for the production of peat briquettes and semi-briquettes;

c) for non-fuel needs (column 6) - fuel resources used as material for non-fuel needs. For example, coal used as an additive to clay solutions during oil drilling, as well as a filter agent; gas injected into the reservoir to maintain reservoir pressure; fuel peat used as a heat-insulating material and for fertilizer; firewood used for the production of a container board; oil used for flushing wells; fuel oil used as a lubricant; kerosene used for washing parts, etc.

Data on the consumption of fuel resources used directly as boiler and furnace fuel (in the production of electricity and heat at power plants and boiler houses, to create the necessary temperature regime in technological processes) are reflected only in column 3.

8. In columns A and D of section 1, the names of the coals of individual basins and deposits are given in accordance with Appendix No. 1 to the Instructions for filling out the form of federal statistical observation No. 4-TER (indicating the N line corresponding to the type of coal).

9. Lines 1165 and 1631 provide data on coal consumption in terms of reference fuel. Coal is converted into reference fuel, as a rule, by multiplying the volume of coal in physical terms by its actual thermal equivalent (K), defined as the ratio of the net calorific value of the operating state of the fuel to the calorific value of 1 kg of reference fuel, i.e. 7000 kcal/kg. If it is impossible to determine the actual thermal equivalents directly in the organization - consumer of this coal, you can use the data on this indicator from the documents of suppliers or use the standard coefficients for converting coal from a given basin (deposit) into conditional, which can be obtained from the territorial body of Rosstat.

10. In lines 1632, 1633, 1640, data on the consumption of peat, peat briquettes and semi-briquettes in conditional humidity are carried out.

11. Line 1750 provides data on the consumption of heat energy by organizations of all types of economic activity (column 3).

The volume of heat energy consumption does not include losses of heat energy in heat networks (main networks, cities and urban-type settlements).

12. In cases where, under the terms of the contract, the tenant pays a fee to the lessor of the premises, which includes the cost of consumed heat energy, the information about this heat consumption in the form is reflected by the lessor.

13. Section 3 shows the cost of fuel purchased on the side, received from other legal entities and individuals under an exchange agreement, a commodity loan or free of charge, in the reporting year and credited upon receipt of fuel used for technological purposes, the production of all types of energy (electrical, thermal, compressed air, cold and other types), heating of buildings, structures, operation of agricultural machines and vehicles, transport work on production maintenance performed by the organization’s vehicles, regardless of what part of the fuel was used (consumed) in the reporting year for production and household needs or remained in the warehouse in the form of residues.

Expenses for the purchase of fuel in this line are reflected at purchase prices (excluding VAT, excises and similar obligatory payments), including transportation and procurement costs associated with its purchase; insurance costs; costs of bringing the fuel to a state suitable for use for the planned purposes (costs of the organization for processing, sorting, packaging and improving the technical characteristics of the received fuel, not related to the production of products, the performance of work and the provision of services); other costs directly related to the purchase of fuel, as well as non-reimbursable taxes paid in cases provided for by the legislation of the Russian Federation.

Line 1880 shows the cost of refined products (gasoline, white spirit, kerosene, diesel fuel, fuel oil, petroleum bitumen, lubricating oils), line 1881 - the cost of natural and associated gas, line 1882 - the cost of coal, line 1883 - the cost of other types of fuel (coke oven gas, blast-furnace gas, open-hearth gas, liquefied hydrocarbon gas, coke, shale, peat, firewood and others), that is, this line reflects the purchased fuel of all types, intended for the production process and the implementation of statutory activities, at cost, accounted for on the Debit of accounting accounts of inventories.

Line 1885 shows the cost of electrical energy spent on technological, energy, motor and other production and economic needs of the organization (lighting, heating of buildings and other needs), line 1887 - the cost of thermal energy. Thus, these lines reflect the purchased energy used in production (according to actually accrued payments), attributed to production costs in the reporting period, at the cost recorded on the Debit of cost accounting accounts 20, 23, (25, 26), 29, 44 in correspondence with the Credit of accounts 60 (76) (according to the totality of all possible correspondences of the accounts of this group).

Line 1888 takes into account the cost of purchased water used for technological purposes and for other production and economic needs of the organization, the production (including by the organization itself for production needs) of all types of energy, heating buildings, as well as for the transformation and transmission of energy. Thus, this line reflects the cost of water used, attributed to production costs in the reporting period (according to actually accrued payments), taken into account on the debit of accounts 20, 23, (25, 26), 29, 44 (on the basis of all possible correspondence accounts from this group) in correspondence with the Credit of accounts 60 (76).

This line does not reflect the cost of water included as required component into the manufactured product.

14. In section 4, lines 1890 and 1891 provide data, respectively, on the number of metering devices for electric energy and (if any) power.

Line 1892 provides data on the number of thermal energy meters.

Lines 1893 and 1894 provide data on the number of metering devices for hot and cold water, respectively.

Line 1895 provides data on the number of gas meters.

Column 1 "Subject to be equipped with energy resource metering devices" provides data on the number of required energy resource metering devices corresponding to the number of energy inputs.

Column 2 "Equipped with energy resource metering devices" provides data on the number of actually installed energy resource metering devices.

Column 3 "Put into operation of metering devices for energy resources" provides data on the number of actually operating metering devices for energy resources, the readings of which are used when accounting for the consumption of energy resources (calculations with an energy, resource supplying organization).