How to disable touch mouse on dns laptop. How to disable mouse control? Disabling the touchpad on Asus laptops

(touchpad). Most often, the touchpad is used only when it is not possible to connect a mouse (on flights, trains, etc.). Yes, and it is not convenient, especially if you need to play games =)
Sometimes it happens that while working on a laptop, you accidentally touch the touchpad and the mouse cursor moves or a mouse click is triggered.
In this article, I will show you how you can disable the touchpad so that it does not interfere.

1 way.

To do this, you need a bank card or a piece of paper that can be cut to size. Do you understand what I'm getting at? Yes Yes. We take yes and close this touchpad with a card or paper. For reliability, you can also seal the edges with tape.
The laziest, fastest and most effective way, on the one hand, has the right to exist.

2 way to disable the touchpad.

On some laptops, manufacturers have provided this feature on the touchpad itself. Most often found on HP brand laptops. Maybe you have too.
Look at the edge of the touchpad for a little glowing (or not) dot. It is usually located in the upper left corner. So, when you double-click on it, the touchpad turns off.

3 way how to disable the touchpad

It is much more common that the shutdown button is located on the function key. You can read more about this in the article.
In short, I’ll just write that if you press such a button, and with it a function button (blue / cyan / purple / orange, etc.) located on the function keys F1 to F12 and on which (most often) is drawn rectangle, then the touchpad will also turn off and the screen will be something like this:

Frequently used combinations to turn off the touchpad in laptops:

Acer: Fn+F7

Asus: Fn+F9

Dell: Fn+F5

Lenovo: Fn+F8

To do this, you will need to go to the Control Panel and disable it from there. Most often in Windows OS, a utility from the company is used. Synaptics. It is called Synaptics Pointing Device Driver.

Let's assume that you have Windows 7, then we follow the path:

Start -> Control Panel -> Mouse -> Mouse Properties -> Device Settings tab

5 way to turn off the touchpad

Without going far from the mouse device parameters (from the previous method), we pay attention to the checkbox “ Disable internal pointing device when connecting external pointing device to USB port” to set and the touchpad will be disabled if a mouse is connected.

There is a small nuance here. Sometimes this checkbox and item is not in the parameters, but you should not think that it should be so. Now we will turn it on.

To get started, try downloading and installing a newer version of the program (pay attention to the inscription at the top) from .

Let me explain that there you need to pay attention to the version on the site (there is always the latest and newest):

Got it? Not? write in the comments then...

If the version is new or you do not want to update and think that it will work anyway, then try it, I will not forbid it. All at your own risk...

So, go to (keyboard shortcut Win+R and type regedit ).

Make a backup (backup) just in case (top menu File - Export). In order not to write in the comments later that because of my article, your touchpad broke, and the keyboard, and "Windows", and the gopniks in the entrance were beaten ...

Go to branch

HKEY_LOCAL_MACHINE\Software\Synaptics\SynTPEnh

Set the value to 33 in hexadecimal system, or 51 in decimal (RMB on file -> Change)

We create the same parameter now in the branch HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh(with the same meaning)

We reboot. We rejoice at the checkmark that appears and put it.

5 way how to disable the touchpad touchpad

To do this, you need to enter the BIOS (at boot, press F2 or F8 or F6 or DEL - depends on the version) and look on the tab " Advanced" paragraph " Internal Pointing Device” to be changed to “ Disabled»

6 way to hard disable the touchpad.

You can unscrew the back cover of the laptop and find a cable there that goes to the touchpad. And then disconnect it.

I think these methods will be quite enough for you to be able to turn off the touchpad.

It doesn't matter what brand you have a laptop or netbook: asus, dell, sony, msi, toshiba, hp, lenovo, acer, samsung, etc. You can still disable the touchpad.

Almost all laptop models are equipped with a special touch panel, also called a touchpad. It is intended mainly for controlling the mouse cursor, as well as calling context menus in various programs and the Windows 7/10 interface. Laptop manufacturers are trying to make touchpads as convenient as possible, but none of them has yet been able to replace the most ordinary computer mouse in terms of convenience.

Moreover, in some cases it becomes a hindrance. When typing text, the user accidentally touches it with his fingers or palm, which causes the cursor to move on the screen, elements that are not needed at the moment are highlighted, and the like. Therefore, some users are looking for ways to disable the touchpad so that the latter does not interfere with work. There are several ways to do this, and now we will consider them in turn.

Using hardware keys

You can turn off the touchpad on a laptop by pressing a special combination of hot keys, but this is provided that the appropriate drivers are installed in the laptop system. In addition, for different laptop models, the keyboard combinations for disabling the touchpad may differ. First of all, look at the topmost row of the laptop keyboard - one of the keys should have a crossed-out touchpad icon. This button is responsible for turning it off.

In general, in laptops, the following combinations are used to temporarily turn off the touchpad:

• Aser - F7 and Fn + F7;
• Asus - F9, Fn + F9 and Fn + F7;
• Dell - F5 or Fn + F5;
• Lenovo - Fn + F5 / F8;
• Toshiba-F5;
• Samsung - F5 or F6.

In HP laptops, the touchpad is disabled by double-clicking the area in its upper right corner or holding your finger at this point for a few seconds. If the described method fails to disable the touchpad, most likely the PC does not have the necessary drivers. In this case, either download and install them from the official website of the manufacturer, or go to other options.

Through the control panel in the properties of the mouse

Many modern laptops are equipped with touch panels manufactured by Synaptics. If so, you will most likely have a special driver installed in your system, and in the mouse properties window there will be a special tab “Device Settings”, marked with a characteristic red icon. Through the Settings app or the classic Control Panel, open Mouse Properties.

Switch to the tab (if available) "Device Settings", select the device you do not need, in this case the touchpad, and disable it with the appropriate button.

Yes, you can also select the middle option by checking the checkbox "Disable internal pointing device when connecting an external pointing device to the USB port." This action enables the touchpad to automatically turn off when a mouse is connected to the laptop. Again, all this assumes that the PC has the right drivers. Now let's see how to disable the touchpad on a laptop if they are not there.

Disabling the touchpad through Device Manager

You can disable the touchpad through the Windows Device Manager. Open the snap with the command devmgmt.msc and expand the Mice and other pointing devices branch. If you see a PS / 2 mouse in the list, then this is most likely a touchpad.

Right-click on the device and select "Disable" from the menu. The touchpad can also be located in the “HID Devices” branch and be called either a USB mouse, or TouchPad, or something else, here you will already have to experiment by turning devices off and on in sequence.

What if there is no "Disable" option in the context menu? In this case, the device can be removed, and in order to prevent it from being installed again when the system is rebooted, use the command gpedit.msc open local group policy editor, navigate to location Computer Configuration - Administrative Templates - System - Device Installation - Device Installation Restrictions.

In the right column, open the "Prohibit installation of devices not described by other policy settings" policy, set the radio button to "Enabled" and reboot.

After that, the remote device will not be installed again.

Note: disks shipped with laptops often have "native" programs for controlling the touchpad, for example, smart gesture at Asus. If such a program is installed on your PC, the touchpad in Device Manager will not be called "Microsoft PS / 2 mouse", but something else.

In this case, to disable the touchpad, it is better to use the program, for sure it has a corresponding function.

Disable touchpad in BIOS

If you are looking for how to disable the touchpad on a laptop without using system settings and programs, do it at the hardware level - through the BIOS. On most laptop models, entering the BIOS is done by pressing and holding the F2 or Del keys. The BIOS interface of different laptop models may differ, but as a rule, the option responsible for disabling / enabling the touchpad is called “Internal Pointing Device” and is located in the “Advanced” section.

The "Disabled" key disables the touchpad, the "Enabled" key re-enables it. The new BIOS settings are saved by pressing F10.

Using Third Party Programs

And finally, one more way to disable the touchpad. For these purposes, there are special utilities. There are not many of them and some of them may not work on older versions of Windows. The most popular of them is. After installation, this little free program settles in the system tray, automatically blocking accidental clicks on the touchpad.

In the Touchpad Blocker settings, you can enable autoload, set the touchpad blocking time and set the necessary hot keys for this.

- A utility for blocking the touchpad, used even before the advent of Windows XP. It is highly unlikely that it will work on Windows 7/10, but you can try it as an option. The utility is completely devoid of any settings, it starts working immediately after installation. You can close it from the system tray.

A program similar in functionality to TouchFreeze, it only disables the touchpad at the time of entering text. Deprived of settings, controlled from the notification area.

If the above tools do not suit you, try installing the driver Synaptics TouchPad Driver. In theory, after installing it in the properties of the mouse, you should have an additional tab "Device Settings", and in it - touchpad control tools. By and large, the TouchPad Driver serves the same purpose as the Microsoft Windows touchpad driver, but it also offers a number of additional features, including support for disabling the touchpad, using three fingers to control, rotation, and several other functions.

It will certainly be useful for users of laptop computers to know how to disable the touchpad on a laptop, because there are times when this useful device interferes with work a little and it is advisable to deactivate it for a while.

Touchpad Synaptics is a touch cursor control device specifically designed to replace the mouse in laptops.

It looks like a rectangular, and less often a square touchpad, which perceives the touch of fingers to emulate the operation of a mouse.

The touchpad microcontroller uses the same one that is responsible for the operation of all connected peripherals - the south bridge. Therefore, in case of reinstalling the operating system, it is perceived as a standard HID device, which eliminates the need to install drivers.

For decades, this technology has remained unchanged and to some extent even convenient. Surprisingly, some users have become so accustomed to the touchpad that they do not even feel any discomfort, and they are controlled no worse than with a mouse.

Most users still use the touch panel only in rare cases when it is not possible to connect peripherals or in cramped conditions.

It happens that while working at the laptop keyboard, users often encounter the fact that accidental clicks on the touchpad knock down the cursor, which is wildly inconvenient - in such cases it is useful to know how to disable the touchpad on a laptop with Windows 10 and other versions of the operating system.

Therefore, we have collected several methods that will help you deactivate the touch panel for a while.

Attention: If you don't have a mouse nearby, don't try to disable the touchpad using one of the methods below, as you must use your cursor to enable it. Therefore, we strongly recommend connecting a mouse before manipulating the touchpad.

Disable by key combination

Laptop manufacturers use special key combinations to control additional options.

Keyboard shortcut on ASUS laptop

As a rule, you can disable the touchpad on a laptop using the Fn + F9 key combination.

However, the key combination can vary, and instead of F9, any function button (F1-F12) is used, but it must have an image of the touchpad (less often crossed out). By the way, pressing again activates the operation of this device.

For example, to disable the touchpad on a Lenovo laptop, you need to use the combination " Fn+F8" or " Fn+F5". The touchpad on the ASUS laptop is disabled by another combination - " Fn+F9" or " Fn+F7“, and you can generally disable the touchpad on an HP laptop with a separate button.

As you can see, the touch panel control settings are individual and vary from model to model.

Additional keyboard shortcuts on various laptop models:

• Acer: Fn+F7
• Dell Inspiron: Fn + F5 or Fn + F7
• Sony VAIO: Fn + F1
• Samsung: Fn + F5
• Toshiba: Fn + F5

Shutdown by a separate button

On some models of Acer, HP and Lenovo laptops, the touch panel control button is placed separately. Just click on it to deactivate or activate the device.

Button in HP laptop

In gaming laptops, the touchpad control key is additionally highlighted for user convenience.

Dedicated button on an Acer gaming laptop

Shutdown by the program

In most cases, Windows comes with a touchpad control program from Synaptics. The software also includes the correct driver and they work together.

The installed Synaptics software can be identified in the tray - this is a panel in the lower right corner near the clock - there you can see the touchpad icon. By right-clicking, you can call up the program settings, among which there is an option to disable - just activate it.

Synaptics Touchpad Setup

If there is no tray icon, then you can call up the touchpad settings through the settings in the Control Panel.

On Windows 10, you need to go to Start > Settings > Devices, which will open the Peripheral Devices menu. There we select the item "Touchpad" and press the button "Extra options", after which the properties of the touch panel will open, where you can already manage its settings.

Setup in Windows 10

On Windows 8.1, this option is located at a different address: Start > Computer Settings > Computer and Devices > Mouse and Touchpad.

Settings in Windows 8.1

On Windows 7 and Vista, these settings can be accessed from the following path: Start > Control Panel > Hardware and Sound > Mouse. Yes, in these operating systems, the touchpad is moved to the mouse settings, and if the touchpad driver is installed, a separate tab with settings will appear where you can disable the device.

Control Panel in Windows 7

Shutdown through the "Task Manager"

There is a way to force disable the Synaptics software responsible for the touchpad. The method is simple and the same for all versions of Windows.

Just press a combination of keys on the keyboard Ctrl + Shift + Esc and the Task Manager will appear. Next, you need to manually search for a program called "Synaptics" or "ETD control center" (in ASUS laptops) in a long list - there is no search provided, so you will have to find it manually.

Shutdown via Task Manager

ASUS laptops use ETD Control Center software

After finding, select the process with the mouse cursor and click on the "End Process" button in the lower right corner of the window. After that, the touchpad will stop working until the laptop is restarted.

If you need a reliable way to deactivate the wheelbarrow, then disabling it through the "Device Manager" will be very helpful.

However, this method is suitable for more experienced users, since accidentally changing the settings of other hardware can lead to instability of the entire system as a whole - be careful not to disable anything unnecessary.

There are two ways to access Device Manager.

First way through option "Run": press key combination Win+R and in the window that opens, write the command "devmgmt.msc"(without quotes).

Run window with "devmgmt.msc" command entered

Second way via keyboard shortcut "Win+Pause/Break", where in the opened menu "System" select "Device Manager"

Calling the "Device Manager" through the "System"

In the "Device Manager" you need to find the item "Mice and other pointers". The list that opens will show "HID compliant mouse"– turn off, agreeing with the warning.

Disabling through the "Device Manager"

In some cases, the touchpad will continue to work even after being disabled, but then "HID Compliant Mice" there are usually 2 or more - so you need to iterate between them, turning off each one in turn, until the result is achieved.

This method is reversible if you need to turn the touchpad back on - right-click on the deactivated device and simply turn it on.

Turn it back on

Disable via BIOS

It is also important that disabling through the BIOS is the most reliable way to deactivate. The fact is that the BIOS is directly connected with all the hardware parts of the computer, in particular with the south bridge, which is responsible for controlling the connected peripherals.

Important! You should not enter the BIOS if you do not understand why it is needed and how it works. Careless behavior and disabling important options can affect the loading of the operating system and the failure of individual computer components.

If you are determined to use this method, then read carefully.

First, turn off your laptop completely. Then turn it on again and after the POST logo appears, quickly press the "F2" or "F10" or "F12" or "Delete" key. It may not work the first time, because there is little time to choose, and different buttons are responsible for entering the BIOS under different laptop models.

Disable Internal Pointing Device in BIOS

If the login was successful, then use the keyboard to go to the tab "Advanced"(the input is confirmed with the "Enter" key), and then select System Properties. Further, depending on the model of the laptop, the function will be displayed Keyboard/Mouse features or "Device Options"- go there.

Find the line that reads like "Internal Pointing Device"- press "Enter" and in the window that appears, select the item Disable- This option will disable the touchpad.

You can exit the BIOS with the button Esc: exit to the main menu, then use the arrows to go to the menu "Save & Exit", select an item "Save Changes and Exit" and confirm the exit with the button Yes.

Exit the BIOS, saving the selected settings

If the item you are looking for is not found, do not be discouraged - not all laptop models support the disable touch panel function. We have another way to disable.

Shutdown using third-party programs

There are a number of small utilities that block the operation of the touch panel forcibly. They were created just in case the above methods did not help you or are not suitable.

We recommend a universal utility - TouchPad Blocker. A small free program has a large set of useful functions for working with the touchpad: autoloading at the start of the operating system, disabling the pointer for a while, disabling multitouch and scrolling, as well as your choice of key combinations to turn it on and off.

The program does not distract during operation and is located in the tray, but is called by right-clicking. You can download it from this address.

Settings for TouchPad Blocker

Functions and settings of the program:

Automatically run on startup– automatic start of the program upon login. Check the box to start the program immediately after Windows starts.
Show system tray notification- option to turn on and off notifications in the system tray.

Block accidental taps and clicks- blocking accidental clicks, in other words, turning off the panel when entering text on the keyboard. When this item is selected, a drop-down menu becomes available in which you must specify the time for which the touchpad turns off after pressing any key.

For example, if you set it to 3 seconds, then during this time the touchpad will not respond to your actions.

Also block move and wheel event– blocking page scrolling if available on the touchpad.
Beep when click is blocked- sound notification when the touchpad is locked.
Turn blocker On and Off– setting up hotkeys to enable/disable the program.

At the moment, all laptops are equipped with touchpads. This is a touch panel whose function is - replace computer mouse. In some cases, the touchpad may interfere with normal operation. For example, when typing text in the editor, they accidentally clicked on it, and the cursor moved to another part of the screen. With repeated repetition, this state of affairs can get boring.

There are also reverse situations, the TouchPad stopped working for some reason, what should I do? Let's talk about both cases in more detail. It is worth noting that inclusion touch mouse is similar to turning off, only carried out in reverse order.

Using function keys

On almost all modern laptops, it is possible to disable / enable the touchpad using a special function key combinations. For different models of laptops, their options are different. It should be noted that this method works in the presence of native drivers.

For many laptops, this is a combination of simultaneously pressed buttons Fn+F9. But, based on what model options may vary.

If your laptop is not among the above, pay attention to the function keys for the presence of images with a crossed out touchpad.

If you can't find the pictures, it remains to try enumeration(Be careful not to disable other desired features). Probably, in this case, you do not have special drivers installed, you can update them or resort to other methods described below.

Disabling the touch mouse through BIOS

Although the previous method is convenient, the disadvantage is that immediately after the reboot, the TouchPad will again be in operation and you will again need to press the above combination.

Disable completely it can be done through BIOS. The BIOS contains settings for all major components, including this one.

Restart your laptop. When turned on, press F2 or Del(or other options, depending on the BIOS version).

Go to the field Advanced and find the parameter Internal Pointing Device. « Enabled" - to enable, " Disabled» to turn off.

Another option might look like this. (Read in the manual for your laptop, where you have this parameter in the BIOS).

Use the button on the touchpad itself

On some laptops and netbooks, the disable button is present on the touchpad itself.

Then you just need press this button in the upper left corner.

Disable using synaptics

Many laptops use the manufacturer's touchpad Synaptics. If you have such a case, then the TouchPad is easily turned off in the button, which you will find in the button Start.

There we choose Equipment and sound.

Next select Mouse and its properties, where we go to the tab Pointer options.

Here you can turn it off completely. TouchPad, or you can make it turn itself off when you connect a mouse to your laptop.

Enable and disable via Device Manager

We launch Device Manager in a way convenient for you, for example, by entering in the window Run(Win+R) command devmgnt.msc.

In the Dispatcher we find our touchpad, it is most likely located in the Mice and other pointing devices section.

Right click on it and in properties disable.

In case you have native official driver on the TouchPad, you can find its advanced settings. For example, at the manufacturer Dell, this can be done as follows.

We open settings in Mouse Properties where I found the Dell touchpad tab. See the link below to open and change settings devices.

A window will open in which you can inclusion And shutdown touch panel.

If there are no advanced settings, then you can download"native" driver from the official website of your laptop manufacturer.

The touchpad (touch mouse) provides the full functionality of the laptop, but there are times when the actual touchpad needs to be disabled for more productive work. For example, while typing, your fingers or palm may accidentally touch the touchpad, which will move the mouse cursor to the wrong place in the document.

Many people use the touch panel on a laptop, but when performing work related to processing or typing large texts, it is advisable to deactivate it temporarily or permanently. There are plenty of options to do so.