Mobile

How to connect a second TV to a Rostelecom set-top box. TV set-top box from Rostelecom, connect to one and two TVs

You won’t surprise anyone with 2-3 TVs in the house - one is always present in the kitchen, where the whole family gathers, the other in the living room, and the third can be in the nursery and in the bedroom. But what if you bought one package of IPTV services, but you want to connect a second or even a third TV to it?

Is it really necessary to purchase for each of them their own prefix? Logically, this should be the case, but there are other ways to view the same packet on multiple receivers.

Note: both TVs will only be able to show one channel, meaning users will be able to watch the same program.

If you are satisfied with this state of affairs, and you agree that:

You will watch the same program on 2 TV sets.
Use only one remote control to switch to another viewing channel.
You will have to buy long cables, and if you are going to connect a second receiver via a high-frequency HDMI cable, you will have to pay a decent amount. Of course, a connection through a tulip is cheaper, but the playback quality will be much lower.

Through Rostelecom equipment

Pairing devices on a free connector. Carefully examine the back panel of the set-top box, and if you find a free socket, then the connection will pass through it.
If the first receiver is connected via an HDMI cable, then the jack marked RCA (for tulip) can be used, and vice versa.
We go to the store and buy a cable of the required length, and mount it for connection. Note! The port on the receiver for this type of cable must be free. If you have an older set-top box, then there may be no HDMI jack, RF OUT will be displayed instead. Connect both devices through this port with tulips.

Through a signal modulator and a divider

This is a costly but reliable option:

You need to purchase a couple of special devices - this is a high-frequency modulator and a divider. The first is connected to the set-top box via the tulip of the RCA connector, and then the divider is connected via a high-frequency cable.
Then the outputs are connected to television receivers. But if you purchased equipment with multiple RCA jacks, then you will no longer need to purchase a divider.

Via PLC adapter

A modern solution without problems is the purchase of branded PLC adapters (approximate cost is about 1 thousand rubles).

This connection is absolutely reliable, it is not only protected from tampering, but also transmits high-definition signals. Get a separate adapter for each TV set, and the problem will be solved, but in this case you will be able to watch different programs on each of the TVs. The provider allows the purchase by installments of several models at once, and this is important.

Modern technologies and equipment allow you to watch high quality television channels. Now all this can be obtained through the available Internet access from Rostelecom. But initially it is worth purchasing a compact device, which already includes a certain list of TV channels. The main thing is to know how to connect the Rostelecom TV set-top box correctly, following the instructions.

Description

Interactive television is in demand among users due to the large number of channels with high quality broadcasting. In addition, you can additionally use service packages that include rental of karaoke films, recording movies and the programs themselves of a certain channel. All this is achieved through the operation of a special set-top box, which is purchased when contacting the provider's office. Its cost, together with the service package, will depend on the tariff offer for subscribers. The classic version is estimated at 4,000 rubles, and the more advanced Premium is 8,700 rubles. The second price is focused on the presence of an additional hard drive in the set-top box, where recording can be made.

Activation of the service is carried out almost instantly after the payment of the subscription fee. But in any case, you will have to connect the Rostelecom TV set-top box, according to the available instructions. If you can’t do it yourself, you can always count on the help of a technician from the provider. Important - the availability of access to the Internet, all the necessary cables, a remote control. All this is included in the kit provided with the purchase. It's best to check if everything is in place beforehand.

Wiring diagram

When all services are activated according to the tariff offer, you should initially turn on the TV using the remote control that comes with it, as well as the set-top box. It uses a separate remote control. The set-top box must be connected to the TV using the cables from the kit. If everything is done correctly, the software will begin downloading, after which the terms of the agreement will be displayed, which you will have to accept to get started.

When the main menu is displayed on the screen, it can be said that the set-top box is ready to start. All functionality is located in the menu. Details about this are on the official resource of the RTK provider. It is important to pre-select the type of connection on the TV itself. It will match the one used to activate the hardware.

Additional data

There should be no difficulties with how to connect a Rostelecom TV set-top box to 2 devices at the same time. The first TV, for example, uses a pluggable HDMI connector, and the second uses AV. The connection is made sequentially. There may be times when the supplied cable is not enough to connect. Then the desired length can be purchased separately when visiting an electronics store.

If you follow the above methods, two TVs will broadcast the same channel. When you need to show different programs, you will have to purchase an additional prefix.

The user manual contains complete information regarding the procedure for connecting, switching on, and operating. If done correctly, you will not have to spend money on subsequent repairs and maintenance. So it is better to study the previously received papers.

The standard option will not allow you to connect the set-top box and the computer. To do this, you will have to download an IPTV set-top box, where authorization data is entered. Now the user gets access to almost the entire range of programs that can be viewed on TV.

There is an additional option - Fun application. It can be downloaded to both phone and tablet. After entering the login and password, watching TV channels will become available anywhere. You can even purchase a specific movie if you wish.

Second prefix

Independence in viewing channels is achieved with several set-top boxes. They all connect to the Internet router via the LAN output. It will not be superfluous to purchase an Ethernet cable of a fixed length. It is important to remember that the traffic consumption will be doubled. Therefore, you need to take care of a sufficient level of Internet connection.

Any questions that arise can be resolved by contacting the technical support service at 8 800 300 18 00. You can get information from the operator on the correct setting of the set-top box, connecting it to the TV or other technical issues. The main thing is to clearly describe the problems, as well as the request when contacting.

Having concluded an agreement for the Interactive TV service, Rostelecom subscribers most often immediately receive a set of equipment in their hands. But the company usually appoints a technician for its initial setup in a day or two, and suburban residents sometimes have to wait a whole week. Don't want to waste so much time? We will tell you how digital television from Rostelecom is connected, and whether it can be done without the help of masters. Knowledge of connection schemes and setup technologies will also come in handy for experienced subscribers, for example, when buying a new TV or moving equipment to another room.

What is included in the set of digital television from Rostelecom

Rostelecom provides its subscribers with two options for digital television services - "" and "Interactive TV 2.0". The main difference between them is that version 2.0 can be paired with the Internet from any provider. An earlier package requires that the router for digital television and broadband access belongs to Rostelecom. To connect version 2.0, we still recommend waiting for the company's technicians to avoid problems with possible incompatibility of equipment settings from different providers. It is also better to wait for the masters if you connect the Internet and interactive TV at the same time.

If you already have a router from RTK installed and working, Rostelecom's digital television equipment can be configured independently. The basic kit includes a set-top box, a network cable and a universal remote control. If desired, the cable can be replaced with a video sender or a Wi-Fi adapter, but the initial setup should still be done with a corded connection.

Set-top boxes for digital television Rostelecom offers in two versions - "Standard" and "Premium". Any of them can be used with both versions of interactive TV, and they are configured in exactly the same way. The only difference is that the premium equipment is complemented by a built-in 500GB hard drive and supports 3D technologies. Well, in price, of course. But no matter what set of equipment you choose, the connection algorithm will be the same.

Connecting a digital television set-top box Rostelecom

You should not try to install an STB set-top box on the day you conclude an agreement with Rostelecom. It takes time for the provider to process your documents, internal work with the equipment and connect a new service to your personal account. Usually these operations take about 24 working hours, and until they are completed, digital TV will not work for you, even if you have made all the settings correctly. You can check whether the service has been linked by calling Rostelecom's contact center at 8-800-1000-800.

If the CC operator has confirmed the availability of interactive TV for you, you can begin installing the set-top box. The connection diagram for Rostelecom digital television in the general case will look like in the picture.

After that, connect STB to the TV using "tulips" or HDMI cable. The latter is not always included in the kit provided by the provider. But if your TV model supports this technology, it is better to purchase this cable separately to ensure a clear picture and maximum sound quality when using the service. When all cord connections are installed, you can plug the set-top box's power plug into a power outlet.

How to set up digital television from Rostelecom

The next step is setting up digital television. Turn on the set-top box and TV, and use the remote control to switch the latter to AV mode. If you used an HDMI cable, then select this signal source in the menu that appears.

A splash screen will appear on the TV screen, indicating that the Rostelecom digital TV set-top box has started downloading. This process takes about a minute. After its completion, the equipment will ask you to enter a login and password to use the service. You can take this data from the contract concluded with the provider. The login and password will necessarily be completely digital, since they are entered with.

After identification, the settings menu (or a list of channels, depending on the set-top box model) will appear on the screen. This will indicate that the connection was completed successfully. At this stage, you can already enjoy all the features of interactive TV. But for ease of use, we recommend additional configuration of the remote control.

Setting up the interactive TV remote

After connecting the Rostelecom digital TV set-top box, you need to check whether the remote control attached to it is synchronized with your TV. Without synchronization, even such simple actions as turning the TV on and off or adjusting the sound from the set-top box remote control will not be possible. For them, you will have to use the TV remote control, which is not always convenient.

There are two ways to synchronize the remote control from a set-top box for Rostelecom digital television with a TV of any model - enter the synchronization codes manually or trust the automation. First, we describe the easiest, automatic option.

Plug the equipment into a power outlet, after loading it, press the TV and OK buttons on the STB remote control. As soon as the diode on the first button lights up and goes out twice, you can configure, the remote control is switched to the programmable mode. Dial 991 on the numeric keypad and press the key that scrolls through the channels.

With each subsequent press of this button on the remote control issued by Rostelecom, the digital television codes will be set. The device will begin to sort through the synchronization codes sewn into it, sending a signal to the TV to turn off.

If the TV turns off, it will mean that the code has been picked up. To save it, press OK on the remote. At the same time, the diode under the TV key should go out twice and light up again, signaling that the parameters have been saved. After that, you can turn on the equipment again and try to control the sound on the TV using the remote control from the Rostelecom set-top box. If it worked, then the synchronization was carried out correctly.

Owners of rare or outdated TV models, when connecting digital TV to Rostelecom, may need to manually configure the remote control. To do this, you will need a hardware sync code. You can find out the meaning of the code on the Rostelecom website.

Go to the "For Yourself" section, then the "Support" menu, the "Interactive TV" submenu. Find the link "Equipment" on the page and follow it. In the new window, scroll down the page until you see the image of the remote control. A list of codes will be attached below it. Find your TV model in it and remember the numbers next to it.

If for some reason you cannot get to the site, contact the company's support service. The operator will prompt the necessary numbers. After that, switch the remote control to the setting mode, as described above. But after blinking the TV button twice, do not press the channel switch key, but enter the code that you spied on the list from the numeric keypad. The TV should turn off.

Attention: each TV model has several synchronization codes. If one of them does not fit, go through the rest of the combinations.

Common IPTV Mistakes

Even with the correct settings, hardware failures can occur from time to time. Most often, complaints that Rostelecom's digital television does not work come from new subscribers who have not mastered the procedure for providing the service. So, if you see that only 10 channels are available to you for viewing, and for some reason the rest do not work, in 99% of cases this means that you have overdue the bill for payment.

Check the balance of the TV service, pay off the debt, and broadcasting will resume in full within 24 hours.

If the message “No IP address” appears on the screen when you turn on the TV, try resetting the power equipment. To do this, unplug the TV from the outlet, then the set-top box, and then the router. After a couple of minutes, turn on the router to the network. Wait until all the lights on it turn green, then turn on the set-top box and TV. Be sure to follow the power off sequence!

If, after turning on, you notice that some indicator is missing on the router, or it is lit in red / orange, call technical support.

Another common mistake: "No signal". It occurs when you turn it on and most often indicates an incorrectly selected signal source. Another option is a broken cord connection. Check the integrity of the cable, try reconnecting all the plugs connecting the set-top box, TV and router. The most rare cause of such an error is the failure of the set-top box. But only the master can diagnose it, so you can’t do without a call to technical support.

If the matter is in the equipment of the company, it will be taken away for repair. But, since digital television without a Rostelecom set-top box cannot work on a TV, a working STB will be issued to you for the duration of the repair. You already know how to connect it.

Digital TV without wires

Many subscribers are interested in how Rostelecom digital television is connected via Wi-Fi. There is such an opportunity, but for its implementation you will need a set-top box with a special port for a Wi-Fi adapter. In this case, it is better to entrust the router settings to specialists (note that in Rostelecom this service is most likely paid). But most importantly, the quality of broadcasting with such a connection will be unsatisfactory.

Television involves the transmission of a very large data stream, which the wireless network may simply not be able to handle. And if you also have the Internet connected via Wi-Fi, get ready for the fact that the image on the TV will constantly slow down and crumble. If you don’t want to pull wires around the apartment, the best option would be to purchase devices called “video sender” in the same Rostelecom. Relating to the category of PowerLine adapters, they will allow you to establish a reliable wireless connection and transmit up to five video streams.

class="eliadunit">

Today, it is rare to find a family that has only one TV installed in the house. People want to install TV in the kitchen, in the bedroom, in the living room. Interactive TV Rostelecom provides an opportunity to watch your favorite TV channels via the Internet, and this service is becoming increasingly popular. Is it possible to connect two TVs at once to one set-top box? This will be discussed in this review.

Is it possible to connect a Rostelecom set-top box to two TVs?

If the subscriber wants to know how to connect the Rostelecom set-top box to two TVs, then this is quite simple:

An HDMI cable must be connected to the first TV;
AV is connected to the second TV.

Wires must be inserted into the appropriate connector. Let's take a look at the diagram:

The TV receiver is connected to the TV using an HDMI cable.
The router (not a set-top box, but a router for the Internet) is connected with an Ethernet cable to the LAN connector.
The power adapter (included with the set-top box) must be connected to the device, then the plug to the socket.

If the TV does not have an HDMI connector, then you can connect it through a TV receiver using an AV adapter. In the case when there is only a SCART connector, the necessary adapter for connection is included with the set-top box.

If the length of one of the wires included in the kit is not enough, then you will need to buy a suitable one in any electrical and electronics store.

This connection option will be able to broadcast one channel on two TVs. This is suitable if the family watched the movie in the room, but had to watch it in the kitchen at dinner.

If there is a need to watch different TV channels on each TV, then you need to purchase a second set of equipment (without an Internet router).

There is another option to view different channels on different devices - this is an additional multiroom service. But, with this option, you can watch channels not on two TVs, but on a TV and a laptop (tablet, phone, and so on).

How and where to install a set-top box, what operating rules to follow - all information can be found in the user manual.

In order for the equipment to serve for a long time (which is what each user is interested in, because the set-top box is not cheap), not to cause problems during operation, and also to avoid repair costs, before installing the device, you need to read the instructions in detail.

If you need to connect a Rostelecom set-top box to a computer, then using a standard connection and cables it will be impossible to do this. For users of the company's services connected to Interactive TV, an IPTV program for a computer is provided. You need to download it and enter user data in the registration fields. This will open access to almost all TV channels available under the tariff plan (the rest can only be viewed on TV).

There is another suggestion - installing the Zabava application, which is available for installation on any gadget - tablet, computer, smartphone. To download the application, you need to register user data and watch Rostelecom TV channels wherever there is Internet.

this application can not be downloaded at all, just go to the Zabava.ru page and log in as a subscriber of Rostelecom. So you can watch TV online, and buy movies from the video library. The quality of the broadcast will be high, this applies to both video and audio broadcasting.

Connecting a second set-top box Rostelecom

In the case when two TVs are installed in the subscriber's house, and there is a desire to view different channels on each, then a second set-top box cannot be dispensed with. No provider gives you the opportunity to watch different programs from one equipment at the same time (applies only to two TVs, for other devices a paid Multiroom service is provided).

To connect two set-top boxes, you do not need to buy an additional roter, because it has 4 LAN outputs, and you can easily connect a second Rostelecom set-top box to it.

For example, the first TV is connected to the receiver, it is connected to the router via LAN1 (the connection diagram is indicated above in the content), the second is connected to LAN2. Most likely, you will need an Ethernet cable longer than the one supplied with the equipment, you will need to buy an additional one, having measured the length in advance.

It is necessary to make sure that the Internet speed is sufficient, since the use of traffic with two working set-top boxes at the same time will greatly increase, there may be interference in video broadcasting and failures in the operation of the Internet itself. Before connecting a second set-top box, you need to familiarize yourself with the current tariff, and, if necessary, switch to a faster one in order to create optimal conditions for the correct operation of the equipment.

If you encounter any difficulties, you can call the technical support service of the Rostelecom provider at the number that is relevant for the region. For residents of Moscow and Moscow Region, the number is: 8-800-100-08-00.

The specialist will explain how to properly connect two Rostelecom set-top boxes, and if something goes wrong, he will help sort out the problem.

How to turn on the prefix Rostelecom?

After both consoles are connected, you need to activate them. You can do this in the following way:

turn on the set-top box from the Rostelecom remote control;
turn on the TV from the "native" remote control;
if all the connections are made correctly, then a splash screen will appear on the TV screen with fields for entering the login and password, they must be entered using the Rostelecom remote control (login and password are written in the contract, or on the package from the set-top box);
then it will be necessary to accept the terms of the Offer.

When all actions are completed, you can use television - view channels to your taste in two rooms.

Set-top boxes Rostelecom: characteristics, price

If the subscriber wants to purchase a second set-top box, then you need to familiarize yourself with those that the provider offers, because the cost of them is different. The user, after reading the characteristics of both proposed options, will be able to understand whether it is necessary to overpay for a more expensive one.

Prefix Rostelecom "Standard" - characteristics:

cost - 4000 rubles;
supports 3D and HD;
no built-in hard drive;
stereo sound;
support for interactive TV;
support for "View Control" (record, pause, rewind) - 50 rubles per month;

Characteristics of the prefix "Premium":

price - 8700 rubles;
supports 3D and HD;
there is a built-in hard drive of 500 GB;
stereo sound;
support for channels in high and standard digital quality;
support for interactive TV;
"Viewing control" (recording, pause, rewind) is performed via the built-in hard drive;
warranty service - 76 Kb.

By purchasing the "Premium" prefix, you do not need to pay monthly for viewing management. Each subscriber decides for himself - to give a large amount at once, or once a month to pay a small amount. The advantages of this set-top box are a hard drive, which will especially appeal to moviegoers who "fill in" all their favorite films!

As soon as a bilateral contract for the provision of modern interactive television services is concluded, each subscriber of a company such as Rostelecom receives a set of technical devices and equipment at his disposal. Unfortunately, a visit to a client by a specialist to set up television does not occur immediately, but only after a couple of days, or even more. If you don’t want to waste precious time, you can organize an event yourself, and certified engineers will tell you how to connect interactive TV from Rostelecom in this material.

At the moment, the company we are considering is ready to provide all its subscribers with two types of services at once. This is a conventional interactive TV, as well as a second generation broadcasting system. The difference is that version 2.0 is able to function together with the Internet, regardless of the name of the provider. You can quickly and without headaches achieve a positive result when making a connection if the user has a proprietary router, the set-top box itself, accessories for interactive TV provided by Rostelecom.

The initial kit usually consists of the following components:

TV set-top box;
Proprietary network cable;
A remote control specially designed to provide remote control of the set-top box;
Connecting video cable type HDMI;
Wi-Fi adapter and installation software.

How to connect a prefix Rostelecom

Experts say that connecting the set-top box on the day of signing the main bilateral agreement will not give a positive result. The thing is that it takes time to process the documents received by the company. As a rule, the operation of entering data into the global system requires 24 hours, respectively, even with the correct settings, digital TV will not work. You have the opportunity to clarify whether the system number of the set-top box was linked using the free phone number 8-800-1000-800.

The connection is as follows:

Connect the main cord with the built-in power supply to the set-top box;
Ensure a reliable connection between the set-top box and the router using a special network cable;
Next, the STB is connected to the TV. Here it is best to use an HDMI cable;
Plug the power cord into a power outlet, select the appropriate channel on your TV, and you're ready to customize your settings.

Connecting two TVs to one set-top box

If you want to connect a second TV to an already working set-top box, you should first examine its features. On the back of the device, you can see that the HDMI port is busy, since the main TV is connected to it. But, as a rule, there is another port nearby, which is necessary for connecting an RCA cable. Therefore, it should be used.

Depending on where the second TV will be located, usually in the kitchen or bedroom, you will need to purchase a cable of the required length. Once the cord is at your disposal, follow the procedure for connecting the second TV and receiver. If everything is done correctly, you can watch interactive TV on two TVs at once from one tuner.

Convenient services available on interactive TV

Do not forget that the method of connecting TVs we have considered carries the ability to view the same channel. If you want to watch different channels on two TVs, prepare the money, because you will have to purchase another receiver.

Connecting to a second TV without a second set-top box

Practice shows that most subscribers who already have an IP TV set-top box are interested in the same question, how to connect a second TV? Yes, there is such an opportunity, but you will have to acquire equipment such as a receiver. It is he who is designed to amplify the signal and transmit it to two TVs at once. Modern receivers, which Rostelecom offers, carry the technical ability to provide high-quality image settings, up to the Full HD level.

How to make digital television without wires via wifi

Often, potential customers of Rostelecom are interested in whether it is possible to provide events for connecting TV without using wires that are always tangled underfoot, using wifi technology. Undoubtedly, such a technical possibility exists, but in order to implement it, the user will need to purchase a set-top box with a special built-in port to which a Wi-Fi adapter must be connected. If you have purchased such equipment, then in this case it is most reasonable to entrust the setup of the router to the company's masters. Yes, such a service is paid, but the masters of Rostelecom know their business for sure and will perform the procedure correctly and very quickly.

The quality of the broadcast when connected via a wireless wifi connection will be poor.

Recall that the transmission of a television signal via wifi involves the transmission of a huge amount of data, which even a modern wireless network is unlikely to cope with. Moreover, if the Internet also works from a wifi router, then you should prepare for the fact that the television image will generally slow down, as well as crumble into individual pixels.

Who does not want to pull multi-meter wires around the apartment, where an expensive repair has recently been made, the best thing would be to purchase such equipment as a video sender. The device belongs to the category of PowerLine adapters, which are specially designed to maintain a high-quality and reliable wireless connection.

Conclusion

Today, when the number of providers is very significant, many users ask whether it is worth connecting interactive TV from Rostelecom and using the services of this company? Statistics show that Rostelecom's services, including interactive television, are distinguished by positive reviews and have subscriber growth dynamics. The high quality of signal transmission, as well as many additional offers - all this makes people start cooperation with the organization in question.