Asus bios entry. how to enter bios on asus laptop

How to enter BIOS on an ASUS laptop

Many ASUS laptop users do not know how to enter BIOS. You can easily and simply set up your own computer with our help. And if you need qualified help from specialists, then contact the ASUS laptop diagnostic and repair service center.

In order to enter the BIOS on an ASUS k56c, x553m, x540s, x550c laptop on Windows 7, 8.10, you can use the keys or the system.

It is worth noting that it all depends on the brand of the device. The general rule is this: wait for the device to boot and click "Delete". But ASUS laptops have their own secrets.

How to enter BIOS on Asus laptop Windows 7

Most often, you can see the key combination for entering the BIOS on the screen of your device. Most likely, the system refers to the F2 key - you need to press and hold it until Windows boots.

If it is not there for any reason, then you can experiment. Hold down "Delete" and the "F2" button at the same time, if this does not help, try the combination of "Ctrl" and "F2". Some of the ASUS laptops go into BIOS thanks to these keys. If your device is ASUS X552W, then you should hold down the "Shift" and "f2" keys at the same time in order to enter the BIOS.

You can also use the keyboard shortcuts "Ctrl+Alt+Del" or "Ctrl+Alt+Ins", "Ctrl+Alt+Enter" or "Fn+F1", "Ctrl+Ins". These combinations are not required very often, in most cases the above are enough. In order to call the boot menu, you need to use the following keys: F11, F12, F8, Esc. In the event that it does not come out to run, then it can be disabled directly in the BIOS. To activate it, you need to go into BIOS, select the "Boot Menu" option, and "Enable".

How to enter BIOS on Asus laptop Windows 8

It is necessary to configure the subsequent inclusion in the BIOS system by changing the computer settings. To do this, go to the general settings menu item in the special boot options. Here you need to indicate in the reboot request that you need device diagnostics. Next, in the "Diagnostics" item in the advanced parameters, find the UEFI Firmware Settings.

How to enter BIOS on Asus laptop Windows 10

The procedure is very simple, you need to set the BIOS entry command before Windows boots. While your laptop is running, hold down the shift key. A window will appear on your screen where you need to select the reboot item.

We hope that we were able to help you, and now you feel much more confident using your laptop. The BIOS menu will help you set up your device and will be a good helper.

We have already written. However, we immediately received a question from several readers of the portal at once about how to enter the BIOS. Apparently, they were interested in this for the most part not for updating the BIOS, but for interest. Indeed, not many people understand what a bios is in principle. And the BIOS, in simple terms, is something without which no computer can start its work. The BIOS sends different commands when the operating system boots up, so everything turns on and works as it should.

The BIOS performs several functions at once:

1. The BIOS controls the computer immediately after you power it up by pressing the power button with access to electricity. It is the BIOS that passes the "baton" to other programs in the boot sector,
2. The configuration of your computer is saved on the BIOS and when the computer is started, this configuration is compared with the saved configuration,
3. Thanks to the features of the BIOS, you can change the data about certain components of your computer, their modes and operation in general (at least disable it altogether),
4. The BIOS handles incoming requests and I/O operations. This is the main function of the BIOS, for this purpose it was developed.

Entering bios from a laptop

Many are interested in exactly how to enter the BIOS on a laptop. This is understandable, to experiment and see how this system works and looks interesting to everyone, but how to do it is not clear. And besides, home computers are becoming less popular while the popularity of laptops has been growing for several years in a row.

The difficulty of entering the BIOS for inexperienced users is that when you start the laptop, there is no data on how you can enter the BIOS. However, you should not despair, it is not scary and even quite normal. Depending on the laptop and its model, it will depend on which buttons on the keyboard you need to press to enter the BIOS. However, it is unrealistic to describe everything, therefore, when you boot up your computer, you should go through several options that can work.

Therefore, it is much easier to enter the BIOS from a computer, and you don’t have to remember anything - the “Delete” button will easily take you to the BIOS. On a laptop, it's worth experimenting here and there. Or find out in advance the command to enter the BIOS on the forum, where those who have exactly the same laptop model can suggest an option.

So, for a laptop, the most popular buttons besides "Delete" are:

1. Esc
2. tab,
3. "F1"
4. "F2"
5. "F6"
6. "Ctrl F2"
7. "Ctrl Alt S" - if you have a little-known laptop manufacturer.

Try these options and remember what exactly worked so you don't rack your brains next time.

Enter bios with hp

A lot of people praise and, moreover, deservedly computers from the manufacturer HP. They also produce wonderful technology in general, not just computers. Perhaps that is why they are popular all over the world and Russia is no exception. Russians very quickly adopted hp computers, because they are quite common among those who have a computer at home. But, one way or another, questions related to how to enter the BIOS in hp do not become less, on the contrary, the popularity of this question is growing, more and more PC and laptop users want to know the answer to it.

Well, we are called to help those who need an answer, so now you will learn how to enter the BIOS from an hp computer:

1. After that, press the "Delete" or "Esc" key,

Next, the BIOS will start loading and you can see how it works. Here you can do what you wanted to enter the BIOS for. Don't worry if the screen looks strange to you, because many of this are extremely frightened and begin to restart the computer or simply deprive it of its power source. You only need to remember that when working with BIOS parameters, you should be more careful and accurate. The fact is that without knowledge in this area and without special reasons for this, it is not recommended to change the parameters in principle, and even more so in order to simply check how and what works here.

asus bios entry and bios exit

In addition to the manufacturer "HP", "ASUS" is also popular. In addition, it is asus that produces the largest number of motherboards in the world today, and this says a lot. Therefore, your computer probably has a "motherboard" from asus. As you already know, in order to run the BIOS, you need to know the model of your motherboard. In your version, this is an asus motherboard. It's time to find out how to enter BIOS in asus, I want to take advantage of all the features of my computer, and this is understandable. Well, it's not difficult, in any case, even a pensioner can cope with it. And there are no special differences in how to enter the BIOS in asus computers or computers from another manufacturer.

So your action plan is:

1. Click on the computer's power button,
2. After that, press the "Delete" or "F2" key,
3. In the menu, select the BIOS start or press the "F10" button.

So you can enter the BIOS from your computer. However, we have not yet noted how to exit the BIOS. To do this, you need to go through the following procedure:

1. Press "F10" to save the data and entered changes, or click on "Save end Exit Setup",
2. Confirm the save command by clicking or the button with the letter "Y" (yes), and if you change your mind, press "N" (not).

You can exit the BIOS without saving the changes entered. To do this, simply press the "Esc" button on your keyboard or click "Exit Without Saving" on the screen.

A component such as the BIOS on an asus laptop is an extremely complex memory component that monitors the general condition of the entire computer and informs the user of all problems in its operation in time. The abbreviation itself stands for Basic Input and Output System. It is present on every laptop, regardless of model and country of origin. It is this software that checks all its components before starting the computer, and if one of the components in the laptop is faulty, then its launch simply stops. Naturally, this scenario does not please the user, but the BIOS itself on the laptop works properly. After all, it was created to track problems with component devices.

How to access BIOS?

Answering the question of how to enter a component such as, I would like to note that absolutely all computers are individual. That is why each BIOS on a laptop starts differently, and the question of how to enter it can only be tried to be superficially explained. If we consider the BIOS on a laptop in more depth, then we will have to go through a lot of options before we can find the answer to the question of how to enter it.

So, what is the initial algorithm of actions when answering the question of how to enter the BIOS component:

Description of each action

For those who, for some reason, could not enter the BIOS, it makes sense to consider each step separately.

* When you turn on the computer itself, problems are unlikely to arise and the first step on the way to entering the BIOS will be overcome. In fact, anyone can press the power button.

Continuing to answer the question of how to enter this component, I would like to elaborate on the second point. After all, it implies a fairly quick reaction, the absence of which can be observed among novice users. In order to press the appropriate button in time, you need to carefully monitor the signals of the device itself, which will definitely show you how to enter. In particular, if you find a splash screen with the manufacturer of the motherboard on the monitor screen, which will appear anyway, you need to immediately press the button. And on this, in fact, the question of how to enter this component is settled.

The third point implies such a crucial moment as setting up this component on an ASUS laptop. Its configuration, of course, is not required at all, because the factory settings are already set properly. And yet, in some cases, setting up some modules is simply necessary. For example, configuring the processor parameter module may be required when overclocking the latter to certain parameters. The setting can also be useful in the case when it is necessary to set priorities during loading. In other words, make sure that the disk or flash card is loaded before the main system boot. It is in such cases that you need, sometimes even detailed, configuration of modules.

Some important points when working with BIOS

As practice shows, the question of how to enter the BIOS cannot be called problematic, because there is nothing particularly complicated here. Of course, an ordinary user may not be able to enter BIOS, however, with proper mastery of the program, this process can be easily learned.

It also happens that you can’t enter the BIOS running on an ASUS laptop due to the lack of standard buttons in the settings for calling this component. In this case, in order to enter the BIOS, you need to try all the F buttons on the ASUS laptop. After all, the BIOS on the laptop must be present, therefore, you can go to it.

It should be noted that, as a rule, entering the BIOS is carried out only through the standard buttons listed above, and not only on an ASUS laptop. Naturally, as already noted, the laptop buttons for calling a component can be changed, but, as a rule, device manufacturers do not resort to such upgrades, realizing that it will be much more difficult for users to configure modules in this case. That is why there are practically no problems with BIOS, especially when it comes to experienced users.

And, of course, I would very much like to remind you that in this component you should not change the parameters of what is not clear. The fact is that the BIOS is a rather complex and balanced system, where absolutely all components are responsible for some part of the computer's support. It is easy to guess that when a module is changed, all the others that depend on it may simply stop starting and, in the end, the device simply will not boot. Naturally, no one needs such a development of events, because in this case you will have to carry your device to special workshops that can. And it will cost its owner a rather considerable amount. And no one can guarantee that such a procedure will end successfully.

How to enter BIOS on an Asus laptop

First of all, start the laptop and check if the monitor is beeping. If everything is in order with this, then wait until the device boots. According to standard methods, you can get into the BIOS by pressing the key F2 or Del.

And you need to do this quickly, catching the moment before loading Windo ws and after loading the main screen. If you did everything right - start working - menu BIOS opened.

Please note that you should not change those parameters that are not clear to you personally. It is better not to take risks, otherwise you can not only correct the system in an undesirable direction, but also bring the laptop to a faulty state. As a rule, after this, the device is subject to the intervention of specialists, and you will have to spend a lot of money on repairs. If your PC does not work properly, you can contact the official Asus laptop repair center.

If you were unable to get into the BIOS the first time

By the way, you will not always be able to catch the moment when you need to press the button. Do not forget that the system will send you a signal that and you expect. When a splash screen image is found on the screen firms of the motherboard, hurry up to press the corresponding button. If you did not have time, you can try again by rebooting the device.

Features of entering the BIOS on the OS Windows 8/8.1/10

You need to go to the settings and select the item responsible for changing the settings, it can also be called update and security. After selecting "reboot now" next, select the diagnostic action. Then go to the advanced options and menu BIOS will run when you select an itemUFFI Firmware Options.

Also, if you are unsure about the correctness of your actions, find the instructions for your model. Most likely, the manufacturer took care of having a couple of words on the BIOS topic and indicated the correct way to enter the subsystem. If the above keys did not help you, then most likely you enter the BIOS through one of the keys F, located at the top of the computer keyboard.

The basic input/output system (BIOS) is a set of microprograms written on the EEPROM chip and forming the system software of the computer. The BIOS ensures that the device boots up and then starts the operating system.

In the BIOS, you can monitor the operation of the fan, check the temperature of the processor and adjust its frequency, boot from a flash card and install a new operating system. Correctly configured internal system parameters can increase device performance by 25-30%.

Changing the configuration of the computer (installing peripherals or new components) can cause problems in the operation of the device, which can be fixed by changing the settings in the BIOS. Experienced users are able to change any system settings without disrupting the computer. For beginners, it is better to refrain from the temptation to go into the base system of the device.

Quick article navigation

Types of BIOS

Before entering the BIOS on an Asus laptop (or any other laptop), you should know that depending on the functionality and settings of the motherboard, the BIOS may differ on different devices. In this case, the main BIOS settings are always identical. According to the menu structure, there are two main types of BIOS:

• Award BIOS;
• ami BIOS.

BIOS entry

The BIOS is entered immediately with the start of loading a computer or laptop, starting from the moment the device is turned on. For this you need:

• Turn on the computer;
• At the beginning of the device boot, a hint will appear on the screen which key should be pressed ("Press DEL to enter SETUP" or "Press F1 to RUN setup");
• Press a certain key or combination of keys on the keyboard (may vary on models from different manufacturers).

Key options

Modern computers and laptops boot quickly enough that it's easy to miss the on-screen prompt. It is better to know in advance which login button works on a particular device model and simply press it quickly and repeatedly during boot until the system responds and displays in the BIOS. The list of possible buttons or their combinations for different models is as follows:

• F2 (Asus);
• F10 (HP and Compaq);
• Del(Delete);
• Esc (Toshiba);
• F3 (Sony and Dell);
• Assist (Sony Vaio)
• Ctrl+Alt;
• Ctrl+ins;
• Ctrl+Alt+Esc;
• Ctrl+Alt+Ins;
• Ctrl+Alt+S;
• Ctrl+Alt+F12.

To replace the BIOS, Intel offers the Extensible Firmware Interface (UEFI) system. On computers with newer platforms (such as the SPARC architecture), the firmware is called PROM or Boot.