How to stick a protective glass on an iphone 5. Why you should stick a protective glass on an iPhone X right now

Protective glass on "apple" gadgets is designed to protect devices from damage. A high-strength chemical composition is usually used to protect the display from chips and scratches. Some users neglect such protection, but in vain. Protective glass for iPhone 6 and other gadgets can significantly extend the life of your mobile device.

In this article, we will look at how to remove the protective glass from the iPhone 5 and devices of other versions. We will also pay attention to how to glue the protective glass on the iPhone. In addition, we will try to identify the advantages of this method of protecting the display over conventional film.

How to change and how to glue the glass - read detailed instructions below.

If we compare the 2 main ways to protect the iPhone display screen - glass and film - most of the criteria will be in favor of the first.

The advantages of glass coating are:

• Increased strength with a small thickness of only 0.25 mm.
• The presence of an oleophobic coating that prevents the appearance of fingerprints on the display.
• Sometimes - the presence of a nano-coating, which gives an increased smoothness of the surface.
• Reliable fastening with silicone elements that do not allow the coating to move and prevent the formation of bumps and bubbles.

Flexible glasses to protect the display of mobile gadgets can also have hemmed edges. This means that the edges are rounded, so the coating is almost invisible. In addition, if the device is hit against something, the coating will not crumble. So if you are wondering what is the best protective glass - stop your choice on the element with hemmed edges.

Removing glass: precautions

Before you get started, you need to consider some rules. First, remember that the glass is quite strong on the display as it is very smooth. But the element is held not thanks to glue, but with the help of electrostatic forces. Thus, two perfectly flat surfaces are in close contact, and the glass cannot be removed simply by picking it with your finger. But it is also impossible to use a household object for this purpose, for example, a knife, since there is a risk of damaging the screen or case.

A silicone suction cup will not help in this situation either. If you stick this tool to a damaged coating, a void will form under it, and when pressed, it will slide off.

And if the mount is good, the suction cup will not go anywhere, but another problem will arise. The fact is that the sensor is attached to the body of the gadget using either glue or adhesive tape. The strength of these substances in terms of rupture is much lower than that of glass or a touchscreen. Therefore, strong pressure can lead to a complete breakdown of the display module and damage to its cables. You need to work carefully and carefully here.

How to remove protective glass from iPhone 5S, 4S

Even taking into account the fact that the period of operation of protective glass is longer than films, it also needs to be changed sometimes. The glass is on a silicone substrate, so it adheres firmly to the display. It takes some skill to remove it.

Before removing the protective element, you need to carefully prepare and purchase some tools and materials, namely:

• Spatula (or thin plastic card), mediator.
• Silicone suction cup.
• Lint-free napkin.
• Glass cleaner containing alcohol.
• Gloves.

Sometimes it happens that all the tools and materials listed above come with a new protective glass. But this happens quite rarely.

And the glass removal algorithm itself includes the following steps:

How to stick glass on iPhone 6 and other devices

For everything to go perfectly, you need to stick the glass in a clean room where there is no dust. Before sticking the glass, you need to take a lint-free cloth or a simple cloth, wet the display a little with a cleaning agent or alcohol. This is necessary to clean the surface and remove fatty elements from it.

The gluing procedure is as follows:

If at the end of the procedure you see small dust particles under the protective element, you can peel off part of the glass and blow it out with a vacuum cleaner or remove it with tweezers. Then you need to glue the element back again. How to re-glue glass, you already know.

Now you know how to stick a protective glass on an iPhone. There is nothing complicated in this procedure, replacing the glass on the iPhone 5S is as easy as shelling pears. Gluing the protective glass on the iPhone must be carefully prepared. And the main thing here is to keep everything clean.

Which is better - glass or film?

The answer is obvious - of course, it is better to opt for glass protection. But the point is not only in shock-resistant properties, but also in durability. One has only to note that the glass on an iPhone 4 or another version of the gadget costs twice as much as a regular film.

So the final choice is up to the user. Think for yourself - what is better - to pay more, but in the future to avoid expensive device repairs or save now, but then lay out a lot of money. Screen replacement is one of the most expensive types of Apple gadget repairs. But, on the other hand, the film is also not a bad option.

As a result, the summary will be as follows. The film is affordable. It protects the display from small scratches, removes glare and covers the entire screen. Do I need a protective film for the iPhone screen, given its characteristics? Certainly yes. Moreover, its cost is low, and how to stick a film is an even simpler task than in the case of glass.

Glass is an expensive option. It gives glare, but transmits light to the maximum, and also reliably protects against strong falls and deep cracks. And if you've found a way to save up for an iPhone, you won't be satisfied with the cheap security options. In any case, knowing how to save up for an expensive device, you can find funds for good accessories for the iPhone 6S or other device.

The time has come when the smartphone has become a part of our lives and we are ready to pay more than $ 1,000 for it. Not everyone will take this step, but judging by the number of modern flagships in the hands of users, people will buy such devices.

Today, screens are only increasing in size, and the case is gaining more and more glass elements. Therefore, if you drop your device, then time slows down and your heart jumps out of your chest. And all because you know how expensive it is to change the glass, and even the screen.

Protective glass can become a lifebuoy, which will save you a decent amount of money and nerves. But is it worth sticking it on your iPhone, because the phone is getting wider and the feeling is completely different.

Let's understand and first consider what these glasses are and what varieties exist.

What are the types of protective glasses?

I want to start by saying that here I will not talk about protective films. This is already the last century, they only protect against scratches and many simply forgot about their existence.

Whatever service you go to, glass will be offered first of all. They can be understood, because at least you can earn more money.

What is there with the views and what kind of glasses you can stick on your iPhone:

• Standard protective glass. Surely you have often seen devices that have glass and it has a very large space along the contour.
  

  Due to the fact that iPhones now have slightly curved edges, sooner or later it will become covered with bubbles around the edges and this is incredibly annoying.

  Will it protect against impacts, for sure yes. But too often they will have to be changed in order for the device to have an aesthetic appearance. It is also worth considering the moment that the higher the quality of the glass, the less likely these bubbles are.

• 3D protective glasses/protective coatings. These glasses completely copy the front cover of the phone and it looks like you are gluing another screen on top.
  

  

  
  If the phone white color, then the edging will be white, and the situation is identical with the black version of the glass (if I'm not mistaken, there are also transparent options). As a rule, it lays down much better, because it completely follows the contours of the screen and you will not see evil bubbles.

  Of course, it also depends on the quality of the glass and who glues it, but this is a completely different topic for conversation.

With the views sorted out a bit, now back to the main question.

Is it worth sticking a protective glass on an iPhone?

I think everyone could notice people in transport or just on the street with phones on which cobwebs flaunt on glass. There are a lot of such people and I think you can guess that they dropped their smartphone on the screen, and repairs are not so cheap.

On the this moment There are following categories of users:

• I do not like films and glasses, I want to enjoy the smartphone as it is.
• I’d better stick it so that I don’t have to pay a fortune for glass replacement later.
• Nothing will happen to the phone for a month, I will use it carefully, and then I will buy it.

The second - I will suffer a little, I will get used to the appearance with glass, but you can save a decent amount of money, if anything.

Well, the third, the most fun in my opinion, people who buy expensive phones and put off gluing the glass for later. As a rule, after a week, the glass is already broken. Well, either the sticker is postponed already until the moment when it's too late.

I lead to the fact that how many people, there will be so many opinions about the protective glass for the iPhone. I personally belong to the second category, because 300-400 dollars for repairs do not lie on the road.

Therefore, if you understand that you are a little clumsy and often dropped your past phones, then it is better to play it safe and still stick it on. No one is immune from the fall of the smartphone, moreover, the situations are different.

I have suffered enough with ordinary glasses, so I can only recommend 3D glasses. Yes, they are more expensive, but you will change much less often and there is less chance of annoying bubbles.

I definitely can’t forbid using without glass, this is your personal decision. There are people who use phones without protection for just years and everything is in perfect order. But if you looked here, then I don’t think that you belong to this category of people.

A couple of tips and useful points before sticking a protective glass on an iPhone

I have been using iPhones since the days of 4S and then the film was enough. Now the screen sizes are simply huge, so since the iPhone 6, the glass is glued by default.


I want to share a couple of moments and observations so that you do not make my mistakes:

• We buy glass in advance on eBay or Ali. Do not overpay crazy money for glass, the markups in stores are incredible. Order a couple at once before buying, save a decent amount.
• We trust to stick the glass to a knowledgeable person. If you do it yourself for many years, then just beauty. But otherwise, go to a normal service, where they will glue it perfectly. Yes, it costs money, but it's much better than ruining the glass.
• 3D glass is the best. Perhaps this is just me, but based on observations, this particular option does not have bubbles and lasts a very long time until you hit somewhere.

With a case, by the way, not everything is so terrible, because everything goes approximately on the same level. Well, the moment with the Home button is also annoying, if you have such a version. But you can get used to it very quickly.

How to stick glass on iPhone?

Additional protective glass for the phone is a modern alternative to the usual films for screens. This accessory will protect your smartphone from all types of mechanical damage display (scratches, abrasions, cracks from dropping the device).

If you decide to purchase a protective glass for your iPhone, check out the basic tips for choosing this accessory:

• glass thickness determines the level of protection of the phone from drops and bumps;
• choose the type of glass - matte or glossy. The second option is cheaper. Glossy products protect the screen from bumps, but not from scratches;
• frosted glass fully protects your iPhone from bumps, scuffs, drops and glare.

Installing a protective accessory on the phone screen does not require special skills. Let's take a closer look at how to stick a protective glass on an iPhone in a few simple steps.

Step 1: Cleaning the Display

Lead workplace in order. Make sure that there is no dust on the surface, which may eventually remain under the film. Then open the package and lay out all the elements on a clean, flat surface.

Clean your smartphone screen with a cloth and glass cleaner. Wipe the display surface thoroughly and wait until it is completely dry. This action will remove even invisible dust particles. Try not to touch the iPhone screen itself anymore, so as not to create new streaks and dust particles. Wipes for the initial cleaning of the phone come with a protective glass.

Step 2: Unpack the protective glass

At the next step, unpack the accessory and prepare it for sticking on the phone. Take the screen and peel off the protective layer, which, after sticking, will be in contact with the phone's display. After detaching the protective layer, try not to touch the protective glass, otherwise fingerprints will remain on the product.

Step 3 Sticking

Flip the protective glass down with the side that was freed from the film. Position the accessory above the smartphone screen without touching it. Try to match everything as evenly and accurately as possible to avoid uneven sticking.

The next step must be done very quickly. Gradually apply the glass to the iPhone display in the direction from the top of the case to the bottom. Release the film so that the side sections stick to the phone themselves. By cleaning the display well, bubbles will not form.

Step 4. Smoothing the surface

Users do not always know how to stick glass on an iPhone. As a result, the result may not be ideal. To remove small bumps or air trapped inside, take a piece of microfiber (included with the glass) or a clean cloth and gently wipe the phone, moving from the center of the display to the sides, applying light pressure. In this way, flaws can be eliminated.

A film is also glued to the outside of the protective glass. Remove it immediately after removing all the flaws. Now turn on the device and check the responsiveness of the sensor. Fine, additional screen should not affect the smartphone in any way.

We eliminate errors

If too much dust and dirt gets under the protective glass during gluing, it will be inconvenient to use the smartphone. The sensor may respond worse to touch, and appearance such a phone will not be the best. Many users are wondering how to re-glue glass on the iPhone and is it possible to do this at all? Yes, you can.

If the accessory does not stick properly the first time, carefully remove it from the display and set it aside on a clean surface. Thoroughly wipe the iPhone screen again and make sure it is free of dust and dirt. Only after cleaning the screen, paste the glass again. More accessory to unstick is not worth it.

How to remove glass from iPhone?

As a rule, users only need to remove the protective glass in one case - when it is broken during a fall or impact. It is very important to remove the accessory correctly so that the fragments do not damage the main display of the smartphone.

Take plastic card and pry the edge of the protective glass with it. Then advance the card under the glass until it is completely removed. This method allows you to create a kind of barrier waiting for the display and a damaged protective accessory.

Banks was founded in 2008. Represents a fashionable and creative brand of digital accessories. The product range is very large: screen protectors, protective cases, portable power supplies, charging device, holders for smartphones and gadgets, USB cables, adapters and many other related products.

"Think of us" is the brand concept.

Benks firmly believes that original and quality products can make a difference in every customer's life.

Comfort and convenience from the manufacturer

The company monitors the quality of digital accessories production on a daily basis. Benks uses imported raw materials to manufacture products, so each product is safe and certified, has no smell, unlike some competitors.

Benks® uses advanced manufacturing technologies

Thus, the buyer receives best product passed rigorous quality checks. One of the leading brands in the category of protective glasses and screen protectors for smartphones.

For many years the company has been working on the production of protective coatings, so the range of products is very large. According to TaoBao statistics, Benks® is one of the leading brands in the protective accessories category. The company joined JD Mail in 2010 and has been a popular seller of screen protectors and gadget films for three years.

The company's protective coatings have passed the MFI certification from Apple Corporation. Banks is the first organization to receive a national patent for the production of protective glass for auxiliary equipment.

Design inspiration comes through love for the beautiful things in life. The combination of exclusive fashion trends and originality, foreign exchange of experience, training of employees in leading design schools, leads to the emergence of unique ideas and innovations in the design of the accessories produced.

How to stick a protective glass on the iPhone yourselfMany iPhone owners try to treat the device as carefully as possible. For this, various covers, bumpers and protective glasses are bought.

How to do it

Before gluing the protective glass, remove the case from the iPhone. If the iPhone display is already covered with old film or glass, feel free to remove it. Wash your hands thoroughly to avoid getting dirt on the screen.

It is best to glue in a well-lit place to see every mote that hits the screen of the device. Well, choose the cleanest surface for glass stickers.

Getting Started

Step 1: Clean up the iPhone display.

To do this, use any microfiber cloth so as not to leave anything superfluous on the screen.

You can also use an alcohol wipe and then wipe the display with a microfiber cloth with a soft cloth.

Step 2. Additionally, we clean the smartphone screen using the supplied tape or any other sticker.

Just touch the display with tape and lift it back up. The sticky surface will collect any remaining dust.

Step 3. Now you need to remove from the adhesive side of the glass protective film and attach it to the screen.

Important: hold the glass by the edges to avoid leaving unnecessary marks on it.

Step 4. Carefully place the glass on the iPhone screen.

If the glass is good, it will lie on the smartphone screen on its own. But for greater certainty, you can smooth it out yourself.

We run our finger through the center of the smartphone and begin to smooth until all bubbles are removed. If any small bubbles remain, take a plastic card and, using light pressure, slide it over the bubbles.

In this tutorial, we used Mocoll glasses. And it's not just that When you sadly look at the iPhone, the display of which is covered with a ruthless mesh, it's too late to think about protection. The manufacturer of protective accessories Mocoll took care of the consumer in advance.

All brand products are designed in such a way that the buyer spends a minimum of time gluing protective glass.

Given that Chinese brand Mocoll (our review) has been producing protective glasses for several years, with thousands of hours spent in research laboratories behind the company's engineers.

Glasses are manufactured using high-tech equipment and receive a number of important properties during processing. Glasses from Mocoll:

They are only 0.33 mm thick. The glass is homogeneous and has equal thickness at any point. Among glass manufacturers, Mocoll has one of the lowest production tolerance percentages.

Mocoll glass easily withstands the impact of sharp objects and does not crumble into fragments upon impact.

Hardness at the level of 9H on the Mohs scale. Only diamond is higher.

The glasses have an oleophobic coating, so after sticking you will not feel any tactile changes from interacting with the iPhone screen.

Mocoll supplies its products with a rich package. The kit has everything to stick glass without additional purchases and searches for a piece of cloth or a plastic card to eliminate bubbles.

Mocoll has several options for safety glasses at once. 2.5D, 3D and advanced design - 3D glass with elastic edges to match the color of the device case.

As you can see above, installing Mocoll safety glasses is very easy. Due to the presence of a special silicone layer, you can not worry about the appearance of hated bubbles during gluing.

For every taste, color and wallet

Mocoll, in the truest sense of the word, has glasses of all shapes and sizes. The range includes glasses for tablets and smartphones (and not only Apple), there is also protection for the MacBook.

Among the most interesting options is special glass with protection against peeking.

It works in such a way that after gluing, you can only see what is happening on the iPhone display strictly at a certain angle. That is, you, as the owner, can easily chat or watch a movie, and the bus passenger sitting next to you will not see anything if you wish.

Glasses are arranged in such a way that they refract the light coming from the screen, making the picture inaccessible to others.

Mocoll glasses are very popular. Accessories from this manufacturer are used by many service centers and workshops. They are really very strong..wrapper ( padding: 10px;

#hid-button,.hid ( display: none; )

#hid-button:checked ~.hid ( display: block; )

#hid-button:checked ~ label ( background: #e4e4e1; )

#hid-button:checked ~ label:before ( content: "Hide"; )

label ( display: inline-block;