Make your own smartphone mount. DIY phone stand

Step 1. Tools.

To create a rack you will need:
1. Aluminum tube with a diameter of 47 mm "f. 4";
2. Connecting tubes at 45° and 90° (aluminum or copper). They are cheap and available at any hardware store.

Step 2. Frame assembly.
Before starting work, you should decide on the installation location of the telephone rack. It should not interfere with the use of the audio system, recharging and other daily activities in the car. Only after that you can start measuring.

I love my GPS and cell phone. But unfortunately, I do not have an additional attachment device in the car. Sitting in the office, I thought about how to make my own gadget mount for my car. And that's what happened from the stationery, which is in every office.

However, there are several disadvantages that make it impractical (especially in winter):

1. WARMLY! Electronics do not like heat, especially batteries. My mobile phone once warned me about overheating of the battery.
2. It is inconvenient to position the driver or passenger.

But with some ingenuity, it can all be solved somehow)

We take stationery clips and pens

In order to make one such holder, we need:

• ball pen;
• small clip;
• middle clamp;
• big clip;
• insulating tape.

We take the handle and attach the middle clamp to one of the sides (it is located in the photo at the top of the handle). On the opposite side we fasten a small clamp, and we attach a large clamp to it. It is this large clamp that will hold our gadget, in our case it is either a phone or a GPS navigator.

Now it's time for the electrical tape. What is it for? - you ask. It is necessary so that both the screen and the body of gadgets are not scratched. Therefore, we wrap tape around the edges of the clamp, which will be in direct contact with the body.

Let's make another holder in the same way. If suddenly you do not have different clamps, you can use the same ones.

After that, I, of course, tested my homemade product. 15 minutes train, I deduced several faults. When driving on the "lying", the whole system begins to vibrate and jump off the mounts. You need to decide on the best mount. Unfortunately, these clips are not suitable for off-road trips.

But as an option, very even nothing.

Now it's hard to find someone without mobile phone which has become an integral part of our modern life. And every phone requires regular charging from the network. When all family members charge their mobile phones and gadgets, it seems that the room is entangled with numerous wires that often get tangled and get in the way. Savvy craftsmen came up with a holder for charging the phone especially for such cases and shared with the world how to make it with their own hands!

In such a case, both a smartphone and a wire, and a bright one, will fit. appearance looks much nicer, more aesthetic and more modern than just a phone lying on the floor. A holder for charging the phone was made from a bottle of Johnson`s cosmetics, pasted over with a colorful paper napkin using decoupage technique.

How to make a DIY phone charger holder?

Everything is very simple. We find a suitable plastic container. Johnson`s products are perfect for the holder due to the elongated oval shape. We outline the outlines of the future cover with a pen and cut the workpiece with sharp scissors or a knife.

A cut bottle will be easier to wash and clean from cosmetic residues. Make sure the inner surface is not greasy. In the protruding part of the holder, cut a hole suitable for the plug of your charger. Then carefully sand the entire surface of the bottle and the edges with sandpaper.

You can decorate the holder with anything, not only decoupage napkins. You can try coloring it acrylic paints, wrap with threads, stick ribbons and beads, pebbles, twigs and shells - let your imagination run wild! If you choose to follow this example, then prepare a bright paper napkin, decoupage glue and a sponge (brush).

Carefully glue the bottle with a napkin, also covering the outer part with glue (or varnish).

The use of modern technical innovations requires us to change some details in everyday life. For example, using a smartphone in a car will be much more convenient if you fix the device in close proximity to yourself on a special holder. Thus, you can not only easily answer the call, but also benefit from navigation programs or other similar applications. In this article, we will look at the most common mounts for cell phone, which allow you to conveniently fix it in the car.

Some phone holders have a suction cup, which greatly expands the possibilities of installing such a stand, including on uneven surfaces. Over time, the suction cups lose a little stickiness and are poorly fixed, but this can always be corrected by rinsing them in warm water (the liquid will wash away all dirt and settled fats). This kind of cell phone holder is well thought out and all the buttons or ports of most gadget models will be fully accessible without being hidden by the elements of the device. Besides, various options clips allow you to mount the phone on the windshield or even on the dashboard, but any other places convenient for you in the car will not be available.

The advantages of using this particular option include ease of installation and the absence of the need to make any changes to the interior elements, while the main disadvantage of this type of phone mount is sensitivity to the peculiarities of placements. For example, if the glass of the car is located under a strong slope, then it will be possible to fix the suction cup only in its upper part. It is also inconvenient to use and too long bracket, because when the car is moving, it shakes the smartphone a lot.

Important!When choosing a suction cup holder, pay attention to the thickness of the rubber from which it is made. In the cold season, too thick material will quickly lose elasticity, and the holder will simply fall off the glass.

Phone clip with flexible cord

This option of devices for placing a phone in a car will bring you much more problems than benefits. Despite the fact that it allows you to fix the phone almost anywhere in the vehicle without the need for glue or suction cups, when driving, such holders will create a lot of noise, blocking the air flow coming from the deflector. Given that the clothespin is most often attached to the heater grill, which has many thin lintels, you better not drive through pits and potholes, as strong shaking can break the mount.

Among the advantages of using a clip, the ability to rotate the phone 360 ​​degrees (became possible due to the presence of a flexible cord) is highlighted, but this does not make it unique. Therefore, attaching the phone to the deflector or to any other place using this method is not the best way solving the problem of placing a smartphone in a car.

phone holder for steering wheel

The phone mount on the steering wheel of a vehicle is a fairly simple design in which the platform for the gadget consists of two black plastic plates that fit into each other. They have a spring inside that allows you to use the holder for phones of various widths, holding them from below and above with silicone rollers.

You won’t have to figure out how to install such a phone holder in your car for a long time. Mounting on the steering wheel is carried out using a silicone loop, at the end of which there is a plastic pedal. By pressing it, you can remove the holder from the steering wheel.

Among the disadvantages of this type of fastener, it is worth highlighting the limited visibility of instruments on the dashboard (in particular, the speedometer indicators are poorly visible, which can easily lead to a fine for speeding), the appearance of a feeling of motion sickness on early stages using a device that occurs due to the rotation of the phone along with the steering wheel of the vehicle. In addition, if the phone is connected to the power cable, then the cord often wraps around the steering wheel when turning. True, this does not always happen.

Bracket that is adjustable

Another option for holding the phone while moving in a vehicle. The adjustable bracket is mounted on the ventilation grille and is suitable for smartphones with different case widths. The gadget is inserted between two limiters, one of which slides down, thereby providing the right phone space. The advantages of using this type of mount include the compactness of the mount itself and the ease of installing the phone, and among the minuses, there are all the same disadvantages as in the case of using a clip: noise, knocking and the possibility of breakage of the holder installation site.

There are so many phone holders in the car that you can’t immediately choose which one is better. Some of them are similar to each other, and some are radically different from their own kind. The last option is to include a ball on a magnet, made of steel and coated with a layer of machined aluminum. 3M® VHB™ bonding material is applied to the bottom of the ball base to provide secure attachment to the dashboard surface. The bonding layer is absolutely harmless to the holder attachment point, so that it can be dismantled without any problems.

The second element that is included in the design of this mount is a magnetic washer that remains on the ball base and holds the device by magnetic attraction. Thanks to it, it is possible to change the angle of inclination of the mount.

The third component is a metal plate that is glued to the phone using 3M® VHB™. It is she who is attracted to the magnetic ball and securely fixes the gadget in one position. The silicon core guarantees a smooth glide and a durable grip that makes it easy to move your phone from vertical to horizontal while changing the angle.

If you do not know how to attach a phone holder to a dashboard, or all the devices purchased earlier did not meet your requirements, we recommend that you turn your attention to a completely new development in the field of such inventions. It is based on the capabilities of a powerful neodymium magnet. You need to install a special ring on the phone (tablet), and put the magnetic holder itself (made of metal) in the car. After that, as soon as the smartphone is near the mount, the magnet previously installed on its cover will be attracted to the latch and ensure tight contact with it. The rubber core promotes maximum contact between the two surfaces, guaranteeing comfortable rotation of the device by 360%.

Most often this Car Holder for the phone is installed on the control panel, and its main advantage is the ease of mounting and further placement of the device. As for the disadvantages, the main one is the impossibility of repeatedly moving the stand along the dashboard (the material from which the mount is made is intended for one-time use).

Flexible panel for phone

If you know well what a standard smartphone holder is, then when you see a flexible panel (mat), you will immediately understand that it is somewhat different from the usual devices. It does not need to be glued or fixed to the dashboard in any other way, because the material of manufacture (silicone) already allows it to stick to the interior trim. The kit for the stand includes two cables: a base (with a USB connector) and a magnetic cable with connectors micro USB and Lightning.

Clamps for the phone are installed on the mat, and a micro USB or Lightning connector is inserted into the smartphone itself, coming from a magnetic cable. After that, you need to install the cable base in place.

The USB connector connects to charger, after which the mat is ready for use. There is an LED indicator on the base, with which you will see the beginning of charging. The smartphone is placed between the latches, as on a stand. It is important that all buttons and connectors of the device remain open, and nothing prevents its full use.

The position of the latches is easily changed: the smartphone can be installed both horizontally (for example, for navigation) and vertically (for communicating with family and friends). You can also choose the most convenient viewing angle. Such a holder is a universal device, which means it is suitable for any smartphone, regardless of the screen size.

Standard cell phone holders in the car do not always justify trust, which is why universal mounts are often a more practical option, which can be reconfigured to use another gadget within a few seconds. In this case, fixing the phone is done in one of three ways:

With the help of magnets, which is not the best option for fixing, since the smartphone can periodically fall.

By means of a cone clip (already a more reliable mounting option, just check right away how easy it is to get the phone).

With polyurethane legs that can be extended according to size specific device. As in the previous version, there may be problems with the removal of the gadget. Of course, this method of attaching a smartphone is also not without drawbacks, but with all this it is a good alternative to non-universal holders.

Car phone mounts can come in a wide variety of shapes and designs, and often enough simple fixture. These include a mesh pocket, in which the phone is placed, as in a regular trouser pocket. Such a device is often used not only to place a smartphone, but also for temporary storage of other small items (cigarettes, keys, etc.). The mesh pocket is easily mounted on any flat surface, sticking to it with double-sided tape.

How to fix the phone if there is no holder

If you decide not to buy a special device for fixing the phone in the car, or you still couldn’t figure out how to choose the right holder for the phone in the car, then we suggest considering some options for fixing the phone using improvised means.

1. We use stationery gum. All that is required of you when using this method is to slip the elastic between the "ribs" of the salon stove grille so that the phone can be placed in the two loops formed. Of course, part of the screen will be closed, but the smartphone will be securely fixed.

2. We buy a stationery clip (binder clip). Having bought a regular paper clip, you need to remove the staples from it, bend it and wrap it with a thick thread. One part (clothespin) needs to be hooked onto the air duct and fixed with an elastic band, and we will use the second part as fasteners for the phone. The advantages of this method include the low cost of the product and ease of execution, but the disadvantage is the complexity of the subsequent removal of the phone and the possibility of a rough impact on the device case, since the thread does not always soften the load. Also, you will not be able to change the angle of the phone, and any attempt to do so may damage the air duct grille.

3. We use wire to fix it. For those who are ready to sacrifice the integrity of the panel for a good phone mount in the car, there is a method based on the creation of a wire holder. To do this, you will need a strong stainless steel wire and a drill. Using the prepared tool, it is necessary to drill holes of a suitable diameter in the dashboard, after which the wire should be bent and inserted into these holes. Now it remains only to hang the phone or tablet by the case.

Important!This mount is only suitable for tablets in a book case, but in this case, the device is not always securely fixed. Moreover, it can easily block access to the radio.

Naturally, an ordinary do-it-yourself phone stand is made easily and from improvised materials. It can be a plastic card, a cassette holder, or even a toilet paper roll. But the car holder must be attached somewhere, otherwise the gadget will fly around the cabin. Here are 5 independent inventions that solve the problem of placing smartphones and tablets in a car.

1. Velcro

The cheapest way. Buy double-sided tape at the office supply store or duct tape from the sewing supplies department. Glue one side to the gadget, the other to the dashboard. Before sticking, the dashboard and the back cover of the gadget must be wiped so that there is no dust and dirt left.

Advantages

Budget.

disadvantages

Such a holder will only live to see the first hole or a serious shake. And the gadget attached to it, most likely, too.

2. Binder clip (stationery clip)

Again for the holder in the stationery! We buy a clip for papers, it is also a binder clip. We take out the staples, bend them as in the picture, wrap them with a thick thread, put them in place and fix them with an elastic band. Then we attach the resulting device to the duct and you're done.

The phone cannot be easily removed from such a clamp. Not the fact that the winding of the thread will really soften the impact on the phone. You cannot change the angle of inclination. You can break the air duct grille.

3. Wire

For those who are willing to sacrifice the integrity of the dashboard. This holder is only for tablets in a book case. Take a strong stainless wire. Drill two holes in the dashboard with the appropriate diameter. Bend the wire and insert into these holes. Hang your tablet by the case.

Advantages

All you need is wire and a drill.

disadvantages

Holes will remain on the dashboard. The tablet will not be securely fixed and block access to the radio.

4. Screws or nails

The most brutal way. For the toughest men. Four screws / nails in the dashboard - and the phone will definitely not go anywhere.

Advantages

No one wants to argue with the owner of such a holder on the road.

disadvantages

Spoiled dashboard and a scratched phone.

5. Metal

This method is for craftsmen and metalworkers. Cut out the necessary details for the future holder from a suitable metal. Bend to fit your gadget. Gather the parts together and connect firmly. Sand and paint. Add rubberized inserts and a mount for interior installation. Ready!

Advantages

disadvantages

It is impossible to do this without special skills and tools.

There are three types of homemade products: flimsy, spoiling the interior, or requiring real skill. Why waste your time when you can buy a phone holder for a dashboard or glass, for example, an OLMIO car holder for smartphones, which will fit into the interior of the cabin, will not spoil anything and will allow you to conveniently use your phone?