Where to download iOS firmware. iPad firmware (All firmware for iPad, iPhone and iPod Touch)
Apple smartphones are practically the standard of stability and reliability of hardware and software components among all released gadgets in the world. At the same time, during the operation of even devices such as the iPhone, various unexpected failures may occur, which can only be eliminated by completely reinstalling the operating system of the device. The material below discusses methods for flashing one of the most popular devices Apple - iPhone 5S.
The high security requirements imposed by Apple on its devices do not allow the use of a large number of methods and tools for flashing the iPhone 5S. In essence, the instructions below are descriptions of fairly simple official ways installing iOS on Apple devices. At the same time, flashing the device in question using one of the methods described below very often helps to eliminate all problems with it without going to service center.
All manipulations according to the instructions from this article are carried out by the user at his own peril and risk! The resource administration is not responsible for obtaining the desired results, nor for damage to the device as a result of incorrect actions!
Before proceeding directly to reinstalling iOS on iPhone 5S, it is important to certain training. If the following preparatory operations are carried out carefully, flashing the gadget will not take much time and will proceed without problems.
iTunes
Almost all manipulations with Apple devices, the iPhone 5S and its firmware are no exception, are carried out using a multifunctional tool for pairing the manufacturer’s devices with a PC and managing the functions of the latter - iTunes.
Quite a lot of material has been written about this program, including on our website. For getting complete information For information about the capabilities of the tool, please refer to the special section dedicated to the program. In any case, before you begin the manipulation of reinstalling the software on your smartphone, read:
As for iPhone 5S firmware, you need to use the latest version of iTunes for the operation. We install the application by downloading the installer from the official Apple website or updating the version of an already installed tool.
Backup copy
If you use one of the methods described below to flash the iPhone 5S, you should understand that the data stored in the smartphone’s memory will be destroyed. Recovery user information you will need a backup. If the smartphone was configured to synchronize with iCloud and iTunes, and/or a local backup of the device system was created on a PC disk, restoring everything important is very simple.
If there are no backups, you should, before proceeding to reinstall iOS, create backup copy using the following instructions:
iOS update
In a situation where the purpose of flashing the iPhone 5S is only to update the version of the operating system, and the smartphone itself generally works normally, the use of drastic methods for installing system software may not be necessary. Simple iOS update very often allows you to eliminate many problems that bother the user of an Apple device.
We are trying to upgrade the system version by following the steps of one of the instructions set out in the material:
In addition to upgrading the OS version, often improving iPhone work 5S allows upgrade installed applications, including those that do not work correctly.
Before proceeding with installing firmware on the iPhone 5S, you need to obtain a package containing components for installation. Firmware for installation in iPhone 5S are files *.ipsw. Please note that you can only install the latest version of the system released by Apple for use as the operating system of the device. The exception is firmware versions earlier than the latest, but they can only be installed within a few weeks after the official release of the latest. There are two ways to get the package you need.
Firmware process
Having completed the preparations and downloaded the desired firmware package for installation, you can proceed to direct manipulation of the device’s memory. There are only two methods available for flashing iPhone 5S to the average user. Both involve using iTunes as an OS installation and recovery tool.
Method 1: Recovery Mode
In the event that the iPhone 5S has lost its functionality, that is, it does not start, reboots, in general, does not function properly and cannot be updated via OTA, emergency recovery mode is used for flashing - RecoveryMode.
- Turn off the iPhone completely.
- Launch iTunes.
- Press and hold the button on the iPhone 5S when turned off. "Home", connect to the smartphone a cable previously connected to the USB port of the computer. On the device screen we see the following:
- We are waiting for the moment when iTunes detects the device. There are two options here:
- Press the key "Shift" on the keyboard and click on the button "Restore iPhone...".
- An Explorer window opens in which you need to specify the path to the firmware. By marking the file *.ipsw, press the button "Open".
- You will be asked if the user is ready to start the firmware procedure. In the request window, click "Restore".
- The further process of flashing the iPhone 5S firmware is performed by iTunes automatically. The user can only observe notifications about ongoing processes and a procedure progress indicator.
- After the firmware is completed, disconnect the smartphone from the PC. Long key press "Inclusion" completely turn off the power of the device. Then we start the iPhone by briefly pressing the same button.
- iPhone 5S flashing completed. We carry out initial setup, restore the data and use the device.
Method 2: DFU Mode
If flashing the iPhone 5S firmware for some reason is not possible in RecoveryMode, the most drastic overwrite mode is used iPhone memory - Device Firmware Update Mode (DFU). Unlike RecoveryMode, in DFU mode the reinstallation of iOS is truly complete. The process bypasses the system software already present in the device.
The device OS installation process in DFUMode includes the steps presented:
- By recording the bootloader and then launching it;
- Installation of a set of additional components;
- Memory re-allocation;
- Overwriting system partitions.
The method is used for iPhone recovery 5S, which have lost their functionality as a result of serious software failures and, if you need to rewrite the device’s memory completely. In addition, this method allows you to return to official firmware after operation Jeilbreak.
In this way, the firmware of one of the most popular and widespread Apple smartphones today is carried out. As you can see, even in critical situations, restoring the proper level of performance of the iPhone 5S is not at all difficult.
Firmware iOS 12 (release date 09/17/2018)
- iPhone 6s, iPhone 6
- iPhone 6s Plus, iPhone 6 Plus
- iPhone SE, iPhone 5s GSM, iPhone 5s CDMA
- iPad Pro (12.9-inch) (1st generation | 2nd generation)
- iPad Air 2, iPad mini 4, iPad mini 3
- iPad Air 1, iPad mini 2
Firmware iOS 11.4 (release date 05/29/2018)
- iPhone 6s, iPhone 6
- iPhone 6s Plus, iPhone 6 Plus
- iPhone SE, iPhone 5s GSM, iPhone 5s CDMA
- iPad Pro (12.9-inch) (1st generation | 2nd generation)
- iPad Air 2, iPad mini 4, iPad mini 3
- iPad Air 1, iPad mini 2
Attention! For the first iPad, the current and latest firmware version is iOS 5.1.1. There have been no further updates for the iPad 1 and are not expected.
Method 1.
Method 2.
Use the download manager. I recommend it if your internet is unstable.
On Windows I used Free Download Manager(see Useful links). Copy the link to the firmware and paste it into the download manager.
The main thing is to remember or change the path where the firmware for the iPad will be downloaded. In this case C:\Downloads
Step 2. Launch or install iTunes
If iTunes is installed, check for update from the menu. On Mac OS, you need to check for updates in the Mac App Store.
Step 3. Full iPad firmware or iPad firmware update
First we answer a very important question!
Question: What to do: full iPad firmware or is a firmware update enough?
Answer: Basic Rule here it is. Let's take the current firmware on your iPad - let's say iOS 5.1.1. And you need to update to iOS 6.1.3. So, if the first digit of the firmware changes, then it is better to do a full firmware. If the first digit remains unchanged, but the rest change, then I recommend an update (for example, iOS 6.0.1 and iOS 6.1.3).
Additional rule. If the system was installed a long time ago, it is buggy, or you had a jailbreak (perhaps not even installed by you at all), but you want a clean, official, bug-free system, then it is better to reflash it completely.
IMPORTANT: Before flashing or iPad update– make a backup copy of your device. .
Full iPad firmware
We connect the iPad to the computer via USB. We are waiting for our iPad to appear in iTunes. Go to the “Name_of_iPad” section. Hold Shift if you have Windows (Alt-Option for MacOS) on your keyboard and click the “Restore iPad...” button.
A firmware selection window will open: select the downloaded iPad firmware file. And click “Open”.
At this time, we do not “breathe” on the iPad and do not disconnect it from USB. It is also desirable that the battery charge be at least 10 percent.
A few minutes later you have a fully flashed iPad. If you want to restore settings, applications, contacts, etc., iTunes will prompt you to do this after flashing the firmware. Feel free to select the latest backup from the list and restore. The process may not be fast (10 minutes - 2 hours: depends on the number of applications and the occupied iPad space before recovery).
iPad Firmware Update
Method 1. Via iTunes with the new firmware already downloaded.
If you decide to update the firmware via iTunes, then connect the iPad to the computer via USB. We are waiting for our iPad to appear in iTunes. Go to the “Name_of_iPad” section. Hold Shift if you have Windows (Alt-Option for MacOS) on your keyboard and click the “Update” button.
Method 2. Via iTunes without downloaded firmware.
Everything is the same as in the first method, only after connecting the iPad you just need to click on the “Update” button. iTunes will update everything automatically. I recommend having a stable and fast internet for this method. IN otherwise It’s better to download the firmware first and use method 1.
Method 3. Update directly from iPad.
The method is available starting from iOS 5. This is the so-called over-the-air update or Wi-Fi update. Charge the iPad at least 50 percent. That is, with 5 percent battery charge, I don’t recommend starting the update;).
In iPad settings, go to “General”. There is a “Software Update” item.
If an update (or even a new version of iOS) is available, you will be prompted to Update (or “Download and Install”).
The method is best for the common man because:
- no computer or iTunes needed. But some people don’t have it. In this case, I recommend making a backup copy in iCloud before updating.
- Firmware usually weighs about 2 gigabytes, while updates recently have been no more than 300-400 megabytes.
- less “extra” movements with the computer;)
Firmware DFU and Recovery
It happens that flashing ends in failure:
and similar reasons. DON'T panic! In this case, flashing the firmware in Recovery mode (less often) or DFU mode (helps 99.9 percent) will help.
A small FAQ on the topic:
Question: Why can't you just click the Restore button in iTunes and everything will be updated??
Answer: if you have a stable and very fast Internet channel, then upgrade to latest version could be so. Apple actually implies such an update. But the most reliable methods are described above and such knowledge will definitely not hurt you. Plus, if you want to reflash, you will already have the iPad firmware downloaded.
Question: Why does each device have its own firmware?
Answer: because Apple devices have different functionality. Developers create firmware for different devices for more optimal performance. Firmware from one device will never install on another device.
Here we deal with using standard methods iPhone firmware, as well as flashing via Recovery Mode and DFU. Save the instructions to your bookmarks. It will be useful to update or revive the device.
Automatic update by air
For what: For a standard transition to a new version of iOS.
How: Go to Settings - General - Software Update. Wait for the information to be updated, check out the new features, download and install software using the appropriate button.
Automatic update via iTunes
For what: To upgrade to a new version of iOS if you can’t download the software from your iPhone.
How: Connect your iPhone to your computer via USB. Go to the device management section, click the button Update and wait for the operation to complete.
Manually updating iPhone via iTunes
For what: To switch to a new version of iOS using the downloaded firmware file if you update your device standard means does not work.
How: Connect your iPhone to your computer via USB. Go to the device management section. Option-click for Mac or Shift-click for Windows Update. Select the downloaded firmware file and wait for the operation to complete.
Flashing smartphone firmware via Recovery Mode
For what: To get a completely clean iOS if operating system not working correctly.
How: Turn off your smartphone. Hold down the Volume Down key for 7 or Home key for other iPhones and connect the device to the computer.
iTunes will automatically detect that there is some problem with your iPhone and offer to update or restore it.
Flashing iPhone using DFU mode
For what: To revive an iOS device when Recovery Mode does not help - the iPhone does not turn on and does not respond to other manipulations.
How: Connect your iPhone to your computer, and turn it off if it's on.
Press and hold the Power button for three seconds. Without releasing it, press the Volume Down button for the 7 and the Home button for other devices and hold for ten seconds. Release the Power button, but continue to hold the second button for another five seconds.
iTunes will notify you iPhone connection. Now it is in recovery mode via DFU and you can do this by pressing the corresponding button.
If the Apple or iTunes logo lights up on the screen, you have put your smartphone in Recovery Mode. You did something wrong, so try again from the beginning.
P.S. Thanks to our friends from re:Store
Find out even more tips from our group at
Firmware update for iPhone 4S involves the process of restoring its functionality. However, you need to know that all data will be lost during this operation. To do this, before flashing the firmware, you should make a backup copy (provided that the iPhone is in working condition).
Before carrying out operational steps to flash the iPhone 4s, you need to download the firmware file using the extension - ipsw. The type of firmware will depend on the specific version of the device. To find the appropriate firmware version for iPhones, the files will indicate all available versions, as well as device models.
In the process of choosing the appropriate firmware option, it happens that the models are difficult to find, which is due to the presence of modifications - CDMA, GSM iPhones. This is precisely what is a very important point when selecting the required model. When choosing a certain type of model, you will need to find a site to download the firmware. You should select the appropriate option and, if the choice is correct, carry out the OS download process. You can also select a new version of IOS, or download old firmware, which was earlier. The main condition is signing old version by Apple.
The next step is to turn off the “Find iPhone” mode. This condition necessary to ensure a successful iPhone 4s flashing process, as enabled options may prevent this from happening. You should check availability new version iTunes. In this case, they launch the program and if a new version is available, this will be notified via iTunes and then it will be possible to update automatically.
After all the measures taken, you can proceed to the flashing process itself.
How to flash iPhone 4s
There are several ways to flash the iPhone 4s: through DFU mode and the second option is Recovery Mode. The second method is an emergency recovery mode and is intended for restoring optimal performance of a device on IOS, in cases where the device stops working when normal modes. In DFU mode, all operational actions are carried out in addition to the iPhone OS and flashing directly through firware. This method suitable for those who own a device with Jailbreak, as well as in cases where it is not possible to carry out this operation with Recovery help Mode.
Flashing process using Recovery Mode:
- at the very beginning, you should turn off the iPhone and connect it to the computer (Home function), which will also recognize the device in Recovery Mode;
- launch iTunes and wait for the search result;
- here two options may arise - through iTunes you will be offered to restore the device (then you need to select the function - OK) and without the participation of iTunes. You will need to click on the iPhone image symbol and search for the function - “iPhone recovery”;
- after that, you will need to press Shift key(OC Windows), or the Alt key (OC Mac). After this, you should select the firmware plan through the “File Manager”;
- among the files, find a pre-downloaded type of suitable file. Then select it and click “Open”.
Next, iTunes will carry out all the necessary actions on its own. After this, you should disconnect the device from the computer (click on the “Power” function and turn off the device). The device turns on by quickly pressing the “Power” function. This way, the device will be completely fixed and ready for use.
Flashing via DFU mode:
- at the very beginning we switch to DFU mode;
- connect the device to the computer and disconnect the device;
- with simultaneous pressing of the keys - “Home”, “Power” and count about ten seconds. Then you should release the “Power” button, and at the same time hold down “Home” until software system iTunes will not recognize an iPhone in DFU mode.
The order of operations in the recovery process is similar to Recovery Mode. This method effective for those who have Jailbreak installed or the operation had no effect through Recovery Mode.
Flashing is performed when the new software program crashes very frequently with the presence of additional options and when the owner of the device changes. In such cases, this operation will need to be carried out with the built-in modem, as a result of which it will be blocked. The blockage is removed after the firmware is installed.
Flashing iPhone, iPod Touch via iTunes
After the restoration process, the iPhone 4s is configured by default, like a new device. You should select the previously downloaded IPSW file. At Apple for iPhone, iPad, iPod Touch, the software is called IOS. Flashing an IOS device is a recovery process or software update device, which consists of resetting the settings to the original (factory) level, with simultaneous IOS installation updated version. Restoration and update have one distinctive feature, which is that personal data is saved (during update).
There is an option to reset your iPhone, removing content, without the need for an update IOS version, and without losing Jailbreak. Upon completion of the update process, there is a chance to receive a device with iOS programs, with completely saved user content and all settings.
Very important point: It is prohibited to update a device with Jailbreak, as this may lead to permanent loading iPhone 4s. To begin with, you should proceed to download the file with the required firmware version.
Features of flashing an iPhone
When these problems arise with the device, it forces you to make a choice - perform a number of necessary actions yourself or take it to a service center? It should be noted that carrying out repairs in a workshop will cost quite a decent amount of money. In this case, you can try to carry out the firmware at home, especially since this operation is not particularly difficult and even an inexperienced person can do it.
How to flash an iPhone yourself if it is working? It is necessary to make a direct connection to personal computer in order to create a backup copy, since the settings during the operation will be permanently deleted. Then, it is advisable to copy personal photographs, videos, audio materials to HDD. When carrying out all the necessary measures, you need to know that despite the modifications of iPhones - 3, 4c, 5c, this procedure is identical for all devices. Taking this into account, you should not worry about the presence of some inconsistencies in the instructions regarding a certain brand of device. The most important condition is the exact and step by step execution all recommendations. Before you begin the firmware process yourself, you should in detail study the instructions for carrying out these activities, which will be the key to success in the process of restoring the functionality of the gadget.
Today, the iPhone occupies a leading position in the global market in terms of sales. mobile devices. This is due to the presence large quantity technical capabilities, various functional features and maintenance, with the provision of a wide variety of services. These devices are distinguished by very excellent quality and durability during operation. But over a certain period of time, it is possible to stop normal functioning device and the formation of some errors. Sometimes situations arise when the iPhone starts to reboot on its own or problems arise when Last update or a new operating system are unsuccessful.
The flashing process will ensure that all functions of the device are in working order, thanks to which it will be able to serve for a very long time.
Finally, it freed users from a rather unpleasant nuance, namely, differences between versions of the same system for different device specifications. The innovation is not God knows what, but it significantly simplifies the life of iDevice owners when complete reinstallation(recovery) OS.
As you know, Apple releases different device specifications for different regions due to technical features cellular networks local operators. Determining the exact variation of your iPhone or iPad is quite simple - it corresponds to the model number indicated on the box and back panel of the device itself (A1453, A1533, A1518, etc.). That is, when reinstalling iOS through recovery, the user previously needed to download an IPSW file with a specific version of the system that exactly matched the device specifications. It is worth admitting that many users did not succeed in choosing the right firmware for their iPhone or iPad the first time.
How to choose firmware for restoring (flashing) iPhone and iPad
Now what? From now on, iOS 10 is not only universal for all iPhone and iPad specifications, but in some cases the same firmware may be suitable even for different models . For example, same iPSW file will correctly set the “ten” to iPad Air 2, iPad mini 3 and iPad mini 4 (previously, each device had at least two versions of the IPSW firmware file).
You can always download all current firmware files for iPhone, iPad and iPod Touch.
What's the use of this? Naturally, it is now much easier to find firmware for your iPhone or iPad, and the task of reinstalling iOS for beginners is greatly simplified - additional nuances often complicate the procedure. In addition, some users (for example, those involved in iDevice repair) store IPSW files on physical drives or in the clouds, and this innovation will help save disk space.
