Last update of accounting 8.3. Make a backup right now

When you enter the program in user mode, it automatically connects to the 1C server and if a new update is released, a message appears about the need for an update. If you want to clarify which releases are currently relevant, you can do this at the link >>>

How to adjust the date of receipt of personal income tax in the document Payroll?

The accounting department of an enterprise has a limited salary block and often users are lost on how to adjust the date of receipt of an employee’s income if necessary so that everything correctly falls into the 6-personal income tax form. This is done as follows: on the personal income tax tab, the “Adjust personal income tax” checkbox is set and corrections are made in the corresponding column “Date of receipt of income”

How to quickly print out receipts and outgoing orders for the year?

Step 1. Open the list of Cash Documents. Set up selection necessary documents for printing (button MORE - Customize the list, for example, printing documents for the year) Step 2. Press Ctrl + A - all selected documents will be selected. Or select documents manually by pressing and holding the CTRL (left) key and pointing to the desired documents with the mouse.
Marked documents are highlighted in yellow
Step 3. Click on the Print button and select the printable form Cash Order

How to return the button of inactive counterparties in the Purchase/Sales Book?

If the button of inactive counterparties in the Book of Purchases / Sales has disappeared, then we perform the described actions.
We set the USRN check in the Support and Maintenance settings: Section Administration - Support and maintenance - Support for counterparties checkbox Automatically check counterparties for USRN

How to display contact information for database counterparties?

This is done through the Universal report in the directory Counterparties - Contact information. Setting up the Universal Report in this case is carried out as follows: Step 1. The following values ​​are indicated in the header of the report for information selection:

• Period
• Directory
• Counterparties
• Contract Information

Step 2. On the "Indicators" tab, the values ​​​​should be set as in the figure below:
Step 3. We generate a report
Step 4. We complicate the task: you need to display only legal addresses.
On the "Selection" tab, the values ​​​​should be set as in the figure below:
Step 5. Generate a report

How to save a counterparty with an address different from the FIAS directory?

The program is configured to prohibit entering incorrect addresses. Look: section Administration - General settings– Contact information – Types of contact information – Contact information of the reference book “Counterparties” at the actual and legal address. If there is a checkbox "Prohibit entering an incorrect address" - uncheck it.

Configuration update 1C: Accounting 8.3 (version 3.0) may be needed in the following cases:

• To correct errors in the program.
• With the release of new regulated reporting.
• With changes in legislation.

Consider the process manual update step by step:

1. Open the "Administration" section and click the "Support and maintenance" item ():

Scroll down to the "Program update results" section and select "Install updates":

In the processing that opens, in the lower left corner, click the "Search and install updates" link:

2. During the process, if required, enter the code user and password from the contract for ITS.

3. If a new version has been released, the program will tell you about it and offer to upgrade to it. Select the one you need in the "Details" section and click the "Next" button:

Please note that I unchecked the "Platform update" item, because for now I want to update only the database, but at the same time continue to work on old version 1C.

4. Wait while the update is downloaded from the 1C website.

5. In the update installation that opens, select the item opposite the "Backup copy" inscription.

6. Specify everything as in the picture below. This setting is necessary so that the program, before attempting to update, does backup and in case of errors during the update, rolled back to this copy. Instead of the second item, you can select "Create a backup copy and save it in the specified directory" and specify your directory with 1C archive copies. Click OK.

7. We are back to installing updates. Click next.

8. Wait for the configuration update 1C: Accounting 8.3 (version 3.0) to finish.

9. The update was successful! Click the "Finish" button.

easy way

If you use my program, then everything will be much easier.

Select the necessary databases with checkboxes in the list and click the "Update" button:

The updater will do everything the same as in the difficult version only.

Sincerely, Vladimir Milkin(teacher and developer).

Send this article to my mail

In the last article, we examined the procedure for updating the version of the 1C Enterprise 8.3 platform (Updating the 1C 8.3 platform). Now we will present to your attention two options for updating the 1C 8.3 configuration on our own, without involving third-party specialists, and we will do this using the example of a typical configuration Enterprise Accounting 3.0.

Note that the procedure is indicated for a typical configuration that does not contain system modifications, in otherwise We recommend that you seek support from competent specialists in order to avoid errors.

The first option is updating through the configurator.

First you need to download and install the update distribution kit of the corresponding release. The update file is available at https://users.v8.1c.ru/. The Download updates link opens a list of all available 1C updates. To download a new version of the configuration, you will need to expand the menu Typical configurations of 1C for Russia and find the line with the desired configuration. In the list of updates of the selected configuration, open the version for download and download the Update Distribution Kit.

After the distribution kit is downloaded, we find the updsetup.exe archive on our computer and unpack it into a separate folder. Among the files received after unpacking will be setup.exe, and it must be launched. This opens the configuration product installer. Click Next, confirming the need to install the data, then select (or leave the default) the template directory and click Next again. After the program displays a message about the successful installation of the configuration, click Finish.

The next step is to launch the database in the configurator mode. In the Configuration section, open the configuration.

Then, in the same section, go to the menu Support → Update configuration and specify the option to search for available updates as the update source, and then the search area for files.

If suitable versions are found, a list of them will be displayed, in bold the one that is the newest of all presented will be highlighted. Select the one you want and click Done.

After installing the updates, the system will offer to update the database configuration, confirm the action.

Option two - automatic update configuration 1C 8.3 in the Enterprise mode.

Start the database in Enterprise mode. In the program Enterprise Accounting 3.0. the necessary functionality is located in the Administration section → Internet support and services → Updating the application version. Implementation settings are also available here. automatic check updates. To get started with automatic installation 1C configuration updates, click the Program Update link. The window that opens displays Information about the available update: version number, size, and a description of the changes.

If you already have a file to update, click the Install configuration update from file link.

Free configuration for keeping records of trade operations. This configuration does not involve accounting or tax accounting, which means it is equally suitable for entrepreneurs and organizations in Russia, Ukraine, Kazakhstan and other countries. The program can work in conjunction with the typical configuration of 1C Accounting.

Accounting is implemented in the "Elementary trade" configuration:

• nomenclature;
• turnover of goods;
• purchase of goods and services;
• sale of goods and services;
• Money;
• work with clients;
• work with providers.

Besides practical use of this configuration, it can be recommended for study by novice 1C programmers, since, unlike typical configurations, the “Elementary Trade” configuration is written using procedures and functions that are easier to read and understand.

To run the configuration you will need , which you can .

When you run the configuration for the first time, a wizard will open that will help you select the language (the system supports 31 languages) and set the initial settings.

At this stage, it is strongly recommended that you carefully fill in all the tabs, since the configuration is universal and includes many accounting options. If your enterprise is not new, then after completing the program settings, you must enter into the system Current state organizations: the range of goods, balances in warehouses and accounts, etc. For these purposes, the system provides a special type of document - Adjustments and Registration of Balances.
Do not be upset if the configuration seems incomprehensible to you. Each configuration element (reference book, document, report and processing) is accompanied by detailed help, which can be called using the F1 key.

Technology platform. Thin client distribution. Server 1C: Enterprise.

The flexibility of the platform allows you to use 1C:Enterprise 8 in a wide variety of areas:

• automation of production and trade enterprises, budgetary and financial organizations, service enterprises, etc.
• support for operational management of the enterprise;
• automation of organizational and economic activities;
• bookkeeping with several charts of accounts and arbitrary accounting measurements, regulated reporting;
• ample opportunities for management accounting and analytical reporting, support for multi-currency accounting;
• solving problems of planning, budgeting and financial analysis;
• payroll and personnel management;
• other areas of application.

Changes in version 8.3:

• Increased scalability and fault tolerance of a server cluster, improved load distribution. A new server cluster load balancing architecture has been implemented, which automatically distributes the load between the cluster nodes based on the composition of the servers, the fault tolerance criteria set by the administrator, and the current analysis of their available performance. At the same time, there is a possibility fine tuning load on individual cluster nodes. The ability to more precisely control the amount of memory consumed by server worker processes is provided, which makes it possible to increase the resilience of the cluster to incautious user actions.
• Licensing Services and external management sessions. The licensing service allows you to organize a centralized issuance of software client and server licenses, which greatly simplifies the task of deploying a server cluster in a virtual environment and dynamically changing the resources allocated to a server. The external session management service allows you to inform the external system about the start and end of a session, receiving in response permission or prohibition to start the session, which allows you to limit the number of users connecting to a particular infobase, keep track of the time the database is used by users, etc. Interaction external system performed via a web service.
• Automatic update thin client through the Internet. This opportunity will significantly reduce labor costs when updating software for remote users. Previously, automatic updating was possible only when working within the local network.
• Support for a secure SSL connection and certificates is provided for all Internet protocols and platform mechanisms based on them. For example, Web services and a Thin Client can work over a secure channel.
• Restructuring information bases v background. New Opportunity allows you to minimize the system downtime required to update application solutions. If earlier it was necessary to stop the work of users for the entire duration of the restructuring of the infobase, now the bulk of the changes are performed in the background, and the termination of the work of users is required only at the final short phase of the restructuring. This approach makes it possible to reduce system downtime not even by several times, but by orders of magnitude, thereby increasing the level of system availability, which is especially important for cloud services and large-scale deployments with large databases. Background restructuring can be performed incrementally, with interruptions, which allows you to free up computing power during periods of peak load on working system, and run restructuring when the system is not loaded, for example, at night and on weekends.
• Security profiles. If a service provider provides Internet access to 1C:Enterprise application solutions developed by third-party vendors, it cannot always control the reliability of such solutions. At the same time, it must ensure the uninterrupted operation of the service as a whole and other application solutions provided as part of this service. For this purpose, security profiles have been implemented in the 1C:Enterprise version 8.3 server cluster. They prohibit the application solution from performing actions that are potentially dangerous for the functioning of the server cluster and the entire service, such as:
• appeal to file system servers;
• launch of COM-objects, external processing and reports, applications installed on the server;
• using external 1C:Enterprise components;
• access to Internet resources.
• Platform version 8.3 received new interface applications "Taxi", more convenient and visual. It implements a number of new approaches to working with applied solutions, including:
• The functions necessary for convenient navigation through the application are implemented in several auxiliary panels: tools, favorites, history, etc.;
• The application solution developer can set some standard composition and arrangement of these panels in accordance with the purpose and features of the application;
• The user can design his own working space, placing panels in different areas of the screen. For example, you can create a "minimalistic" workplace, leaving only the toolbar on the screen, while all the functions of navigating the application solution will remain available using it. Or you can place several panels on the screen at once, providing yourself with a variety and quick opportunities navigate to various functions of the application.
• Any section, list, database object, report or processing, as well as a command, can be added to "favorites" so that later, if necessary, you can quickly return to them.
• Among the interface innovations of the new version of the platform, one can also note:
• Interface operation option without using modal windows. In this mode, new browser windows are not opened, which increases the convenience, performance and stability of work through the web client, allows you to work with 1C:Enterprise applications through a browser on any mobile devices;
• simplification of setting up lists;
• a new line-by-line input mechanism that significantly speeds up data retrieval.
• Performance optimization. Improvements have affected client workstations, a server cluster, mechanisms for interacting with various DBMS, and working with memory. To optimize work with the DBMS, the largest amount of work was carried out for Microsoft SQL Server, including providing support for working with latest version Microsoft SQL Server 2012.
• Improvements to application development tools. The ability to load / unload 1C configurations (structure and data) as a set of files is provided. The uploaded data is stored in the XML format. Possibilities for organizing program code have been expanded by selecting and grouping arbitrary text areas in the module editor. The developer can give each area its own name, which makes programming code more readable. Improved context hint - now it is also displayed when parameters of procedures and functions are set, indicating their types and options syntax. Also, the context tooltip implements automatic recognition and display of developer comments compiled in accordance with development standards - when typing the name of a procedure or function, extended information is shown on its purpose and use cases, and when typing a parameter, on this particular parameter. In order to provide developers with a convenient tool for quick contextual search for information on topics of interest, the Syntax Assistant has added links to collections of methodological materials on relevant topics, regularly updated on the specialized 1C Internet resource.
• Automated testing. The new mechanism allows you to perform automated testing of applied solutions using algorithms described in the built-in language. Also implemented is the ability to record interactive user actions to a file for their subsequent analysis, or to form an automated test based on them.
• Expanded functionality and visual possibilities reporting, new presentational features of business charts, additional statistical and aggregate functions, such as ABC.
• Working with external data sources is much closer in functionality and convenience to standard configuration objects. Data from external sources can be placed in temporary tables for use in complex queries, used as separators in cloud applications, you can programmatically override forms to view them. It also became possible to connect multidimensional data sources, such as Microsoft Analysis Services, Oracle Essbase, IBM InfoSphere Warehouse.
• A special mode of compatibility of infobases with previous versions. It allows using application solutions developed on the 1C:Enterprise platform versions 8.0, 8.1 and 8.2 without additional processing. The compatibility mode also allows you to downgrade the platform from version 8.3 to 8.2 if necessary. In order to use all the features of version 8.3, solutions created on the 1C:Enterprise 8 platform need more early versions, you will need to make minor changes.

Download software package "1C:Enterprise" 8.3.10.2252 x86/x64 RePack(239.16 Mb)

Download configuration "Enterprise accounting Prof / Simplified" (1.36 Gb)

Download configuration "Enterprise Accounting Corp" (1.37 Gb)

Download "Enterprise Accounting Basic" configuration (1.35 Gb)

Download configuration "Document Management Prof" (128.69 Mb)

Download "Document Management Corp" configuration (230.98 Mb)

Download configuration "Salary and personnel management" (210.5 Mb)

Download "Trade management" configuration (732.75 Mb)

Download configuration "Estimate" (141.56 Mb)

Download configuration "Retail" (287.65 Mb)

Download configuration "Logistics. Warehouse management" (122.37 Mb)

Download configuration "Restaurant" (52.5 Mb)