photoshop

How to fix KERNEL_DATA_INPAGE_ERROR blue screen errors (0x0000007A). Reasons for the appearance of decode error Windows Phone and solutions Checking the RAM with the MemTest program

I don't know why, but human civilization cannot create anything eternal. This is confirmed by the kernel data inpage error code. That is why any technology, building or anything else has its own limitations on the service life. Manuscripts - and those are on fire. The only consolation in this case for the owners of various PCs, perhaps, is only the ability of the electronic filling to warn its owner in advance that the legendary animal with the letter “P” will visit his property very soon.

Fortunately, some malfunctions can be fixed, but there are also those that can only be dealt with by purchasing new equipment or part of it. It is to the latter option that the kernel data inpage error error code applies.

By the way, some people confuse this trouble with kernel security check failure, which can also be found on our website.

So, on one of those beautiful days, a blue screen of kernel data inpage suddenly appeared in front of you. It is clear that not live, but on the screen of your favorite computer. What does this message say? It eloquently says that HDD(by the way, if you decide to force things and buy external drive, but you experience some problems with its connection, we advise you to familiarize yourself with this ), where the heap is stored important information(pictures from the phone, saves from games that everyone has already forgotten about, incomprehensible programs, and so on), has a defect. Maybe it's just a harmless joke? But no - if the code values start with the number "0", then this clearly indicates problems with your hard drive.

However, there is a very small chance that a cheaper PC component is the cause of this trouble.

kernel data inpage error - diagnosing

So, what kind of kernel data inpage error is more or less figured out. Now let's try to save the screw - maybe it will blow through? Maybe so - if you are lucky and a winner in life! The thing is that for every hundred occurrences of the message "kernel data inpage error windows 8" there is only one case when this trouble is associated with the cheaper part of your favorite computer - damage random access memory.

But, as one famous song says - believe in fate ...

So, there are two ways to determine the possibility of a problem with the RAM:

Handles, that is, pulling out the strips one by one from their connectors and diagnosing the state of the computer (it is recommended to take a known working memory somewhere and check the computer on it).
Using software diagnostics.

By the way, if the PC is under warranty, then it is not advisable to climb into it with a screwdriver and open its case - this is fraught with trouble with service center if you have to carry your treasure into it. Therefore, the second option is clearly preferable. To diagnose the cause of the appearance of kernel data inpage error windows 10, you will have to use one of the specialized software, which today is quite a lot on the Internet.

STOP Code: 0x0000007a

The blue screen of death KERNEL_DATA_INPAGE_ERROR occurs whenever Windows cannot properly read something stored in memory. This can refer to both types of memory: stored memory on your hard drive, as well as dynamic memory in your RAM, which is commonly referred to in the tech as "memory".

Luckily it has two very simple solutions and if they don't work, you just have defective hardware. Below are the solutions, but first, I will give you some screenshots of what this error should look like.

This error is seen in Windows 8.

This error is seen in older versions of Windows.

First Possible Solution is that your hard drive is causing the problem. To check if your hard drive is causing the problem in Windows XP, Vista, or 7, open Windows Search ( Windows Key + F) and type "chkdsk". Execute it - you cannot run a disk check while active using Windows but you can schedule it automatic start the next time you turn on your computer. Finish what you need and reboot - the disk check process can take a very long time, especially on large and/or slow hard drives. Watch TV, play a game, take a nap... whatever you want to convey.

To do this, in Windows 8, open Windows search (Windows Key + F) and then type "cmd". Click right click mouse on command line and select "Run as administrator" from the bar at the bottom of the screen. You will need to provide administrator authentication and then command prompt windows will appear. Enter the command "chkdsk C: / f / r / x" where "C:" is the letter of the drive you want to examine or repair. This is most often the "C:" drive, but it may be different in your case.

When the disk check is completed, the computer will automatically restart. Checking the disk will fix any problems it encounters on your hard drive - and it will likely run into some even if they are not the cause of this particular error.

The second possible solution is that your RAM is causing the problem. RAM stands for Random Access Memory, and Windows uses it all the time to keep multiple applications running and keep track of important system data. To check if one of your folders is causing RAM, open another Windows search and type memory diagnostic tool. The following is similar to the disk check process - you can restart right away to check your memory, or you can schedule it for the next time your computer is turned on. Save what you need and run Diagnostic Memory.

After both of these processes are completed, you should be able to determine what is causing the problem. If the Memory Diagnostic does not show any problems with your RAM, your hard drive is the culprit. If, however, it detects issues, it means you have defective RAM that needs to be removed or replaced.

If you're using a laptop - or you just don't know how to replace the RAM - contact the manufacturer or technician to help you here. You have done your part.

Good time of the day! Today's lesson will be devoted to the next blue screen with error 0x0000007A KERNEL_DATA_INPAGE_ERROR with whom I recently had to meet face to face. Here I will tell you about what should be done if the numbers 0x0000007A appear on your screen on a blue background, and how you can get rid of this problem once and for all.

Usually this error is associated with various damages. hard drive. For example, it could be a bad connection between the hard drive and the controller, or it could be a bad sector that is causing this problem. It also happens that the controller may fail at all, as a result of which it may cause given error. The lack of free space, as a stupid and ridiculous reason, but this can also harm our PC, so in no case do we discount this.

In general, as you can see, the reasons for the appearance errors 0x0000007A happens a lot and different form, therefore, accordingly, there is no universal solution to this error either. As a rule, the final elimination of the error comes through tests, and by executing and checking various options to fix the error.

Therefore, in the article you are reading now, I will not give a specific answer to the question of how to fix 0x0000007A KERNEL_DATA_INPAGE_ERROR, but will describe only the most basic tips and tricks that will definitely help you cope with the blue screen that appears.

A few about how to fix or remove the blue screen with error 0x0000007A

If after the appearance blue screen with error 0x0000007A, you restarted your computer and the system started up as if nothing had happened, then first of all, open some antivirus and;
Next, you can restart your computer and if you're lucky will begin automatic check a disk that can help us with bad sectors;
If you are unlucky and this check did not start, then we try to start it manually using any installation disk with the corresponding system. I will give an example of how this can be done in Windows 7:
The next tip would be this: check if you have enough free space on the partitions. Running out of space is usually a very rare cause of an error, but still, it's worth checking, and it only takes a few seconds;
Further, sometimes to get rid of the 0x0000007A error, you just need to clean the SATA contacts on the motherboard or HDD, you can also try to completely replace the connected cable;
We are trying to disable memory caching in the settings;
Sometimes, error 0x0000007A is caused by a malfunction of the RAM. In this case, it is often recommended to check the memory using various tests, to be honest, I can’t say anything specific about this, because I constantly, in such situations, check by temporarily replacing the RAM strips. By the way, if you have very dusty, then remove the components and clean everything thoroughly, because even the dust that accumulates in these slots can provoke different kinds malfunctions;
Install all recommended updates for your operating system, sometimes drivers are installed or updated with them for devices that could cause a blue screen to appear;
If you connected any new devices or drives before the error appeared, then disconnect them and see if the situation changes or is the same as before;
And finally, you should pay attention to the motherboard, it may have failed or is damaged. Since not many users will be able to determine this on their own, I recommend contacting a specialized service center, where the master will properly do this for you;

The advice and recommendations that I gave were taken from my personal experience as well as from the Internet. In this article, I tried to collect all the options for fixing the 0x0000007A KERNEL_DATA_INPAGE_ERROR error in one place, so that you don’t have to run all over the Internet and pull information from each page one by one.

By the way, if you have something to add, write to me in the comments or in

We will divide this article into 2 parts:

Solution 1
Solution 2

The first part is suitable for everyone who has an error 0x0000007A ( KERNEL DATA INPAGE ERROR), but for those who have a hard drive on a computer with a capacity of 750-1500 Gb and above, but Windows system 7 or Windows 2008, we recommend starting with the second part.

Solution 1. 0x0000007A - check PC components.

It consists in checking the computer components related to the computer's RAM and hard drive.

How to do this, we wrote in detail in the article about common deaths. Let's repeat here.

Remember that all work with the replacement of PC parts must be carried out with the power turned off. Mishandling of PC components + your inexperience or negligence = PC failure. All actions you perform at your own peril and risk.

Checking the hard drive and SATA cables and power connectors.

SATA cables

A common cause of hard drive problems is poor quality SATA cables. Cheap cables tend to harden and lose their conductivity properties.

This does not happen immediately, but gradually, over time. Cables are subject to daily temperature fluctuations inside the enclosure, from room temperature to operating temperature.

In advanced cases, when system unit does not experience proper care and cleaning, the difference between room temperature and the temperature in the case can reach 30 degrees or even more.

Daily heating and cooling, exposure to dust, eventually lead to deterioration SATA cable. For modern hard drives and motherboards. Even invisible damage can cause a “jam”, much like what happens on a busy highway due to a cat running into the road.

Before all the steps that will be described below, make sure that the cables leading from the connector motherboard to your hard drives, in excellent condition. Position "Yes, what will happen to him!"- does not work on computers.

Do not forget the fact that any modern device whether it be a computer, laptop, smartphone is high-tech a device that is being developed by engineers. All elements of these devices are thought out to the smallest detail.

Advertising

Therefore, do not neglect such a "trifle" as SATA cable.

It also does not hurt to check the reliability of the connection and power connectors of the hard drive, and these adapters.

Checking the disk for file system errors and bad blocks

For hard checks disk, it is customary to use programs that are loaded into RAM, instead of Windows, and allow you to conduct a comprehensive hard disk check, such as Victoria and MHDD. Unfortunately, it will not be easy for an ordinary user, to whom NeOshibka.Ru is oriented, to deal with them.

Therefore, we will consider standard way checking the hard disk, using the program chkdsk included with Windows.

But, if for some reason, a blue screen with an error 0x0000007A(KERNEL DATA INPAGE ERROR) will not allow you to fully check the drive, you will have to study the manual for these programs, or do what we always recommend - contact a specialized service center.

So, in order to run the scan, you need to open a command line window. Click + and in the window that opens enter:

cmd

and click on .

The result of this action should be the opening of a black window - the command line.

Now, in the command prompt, type the command below and then click on .

chkdsk drive letter: /f /r //where drive letter is your logical drive C, D, E, and so on.

First, check your logical drive C and then D, E etc.

It's okay if the system says that the disk is busy and asks whether to schedule the task before the next boot. In this case, agree, and reboot the system.

Even before Windows boot, the scan will begin, depending on the capacity of your drive. The utility will check everything necessary and, if possible, fix it. Repeat this step for all your logical drives.

Checking RAM with MemTest

After checking the disk, if the problem persists, you need to check each memory module individually with the program memtest.

To do this, you only need a flash drive of any size, even 512 MB if you have one lying around.

Solution 2: If you have Windows 7, 2008 and a large hard drive

IN Russian Internet, very little information about error 0x0000007A ( KERNEL DATA INPAGE ERROR), therefore, we looked at how this error is solved abroad.

It turned out that in the English-language knowledge base of a well-known corporation, there is an article under the number KB977178.

We stumbled upon it quite by accident while studying an American forum.

The point of the article is:

A well-known corporation is aware of this problem. The problem occurs if you have a large hard drive installed, from 1 terabyte(maybe less). When you enter and exit hibernation, you get a blue screen of death BSOD with stop error 0x0000007A, 0x00000077, or 0x000000F4.

The fact is that when you exit the hibernation mode, the disk is given 10 seconds. Large disks require more than these 10 seconds, which is why Windows generates BSOD.

It is possible that other similar factors may use this threshold of 10 seconds, which leads to an error.

Another problem is that this fix cannot be downloaded without a request to Microsoft Support. We were able to download the file Windows6.1-KB977178-x64.msu from one of the file sharing services abroad. This file is only suitable for Windows 7, 2008 with x64 bit depth.

For now, we are not sure about the safety of this file, the name and size are different from the original, so there will be no link to it. We will try to check soon.

If you know anything about the solution, please share with us or in the comments.

This blue screen of death with error 0x0000007A is basically for you if there is any problem with the RAM or HDD. This article will present two methods for solving this error.

SATA

The method is performed by checking the PC components that relate to the RAM or hard drive. First, we need to check SATA cable. A fairly common problem with a hard drive is precisely a problem with the SATA cable.

Each of these cables has a rather limited lifespan. Therefore, they need to be looked after from time to time. For example, a fairly cheap cable may simply begin to harden and lose conductivity over time.

Take a good look at this cable and make sure it is in working condition. In addition, it would be nice if you check the hard drive itself with its connectors.

Checking BAD blocks and the file system

To check the HDD, we can use utilities that can be loaded directly into the RAM. These are Victoria and MHDD. These utilities are recommended for advanced users only. However, if the error 0x0000007A does not allow you to log into the system at all, well, you will have to learn how to use these two programs.

For ordinary users, it would be best to use the already built-in verification utility - chkdsk. In order to do this, do the following:

Press key combination Win+R and write the command cmd. Before you should open Command line.
Next on the command line you need to type chkdsk d: /f /r(d is your logical drive letter, so it could be completely different)
After that, we do this with all the other disks.

After that, the program will start checking. The scan time is directly proportional to your HDD size.

memtest

If you did not achieve the desired results with the above method of checking the HDD, then try to correct the situation using the program memtest.

You need to write this utility to a USB flash drive. Then you need to start the PC through this utility only, with one bar of RAM. Then do the same with the rest of the RAM.

Method number 2 For owners of Windows 7 and a large HDD

Error 0x0000007A may well occur to people who use Windows 7 and installed HDD over one terabyte. This is due to the fact that the hard drive is given about ten seconds to exit from hibernation. A disk with a larger capacity often takes a little longer. Because of this, you get a blue screen.