Internet

Solving a problem with sharing a printer. Errors "failed to save printer settings" and their solution What is the error 0x000006d9 how to fix it

In today's article, we will be looking at error 0x000006d9, which can appear whenever you try to share a printer you need. Full text the error looks like this:

Usually, there are a couple of reasons responsible for the appearance of this error. Firstly, this problem may appear due to the deactivated Windows Firewall in the system. Secondly, error 0x000006d9 could have occurred due to incorrect settings local network for a printer, for example, such networks are often created in office environments where there are a whole bunch of workers per printer. However, error 0x000006d9 can also appear due to hardware failures of the printer itself or network equipment computer.

How to fix error 0x000006d9 when setting up a printer

Error 0x000006d9 when setting up a printer often occurs due to a deactivated Windows firewall. Let's see how to use it with your printer - do the following:

open the "Settings" of your computer;
go to the "Ethernet" tab and click on the "Windows Firewall" button;
click on the link "Turn Windows Firewall on or off" in the classic window;
check the boxes next to enable the firewall for private and public networks;
open the "Settings" of the PC again;
go to the "Devices" section;
go to the "Printers and Scanners" tab;
click on the printer connected to the system and click on the "Manage" button;
click on the "Printer properties" link;
go to the "Access" tab in a new window;
check the box next to the "Share this printer" option;
close all open windows.

Try sharing the printer again - error 0x000006d9 has most likely been resolved. However, if it still appears in front of you - try to share files and printers, and activate network discovery. To do this, you need to do the following:

open the "Settings" of your PC again;
go to the "Network and Internet" section;
go to the "Status" tab;
click on "Settings" public access»;
check the boxes next to the options "Turn on network discovery" and "Turn on file and folder sharing";
save the changes in the parameters and close all windows.

Once you're done digging into the sharing settings, try sharing the printer again - the 0x000006d9 error will most likely be resolved. We hope that this material has helped you overcome this trouble with your equipment.

Computer technology has long become an indispensable part not only in offices, but also in residential buildings. It's hard to imagine workplace without a computer and related equipment, even at home. In this regard, almost 100% of documents are processed and created in in electronic format. However, humanity still has not abandoned printed versions of documents. But printing documents requires a printer, but error 0x000006d9 when installing a printer very often prevents it from working.

Printer today

For about 10-15 years, the printer has been as commonplace as a personal computer. If earlier they were installed in the amount of 1 copy for 2-3 rooms and before printing a document it was necessary to stand in line, today the situation has changed radically. There are only 2-3 CPs per 1 printer. The situation is similar in families. Most people tend to have a home desktop computer and a work laptop. At the same time, the printer still remains in a single copy.

But with all the positives described above, people still see the following message on their monitors: “failed to save printer settings, error 0x000006d9”. This suggests that no matter how well-being of people improves and no matter how much technology develops, not many really know how to use their computers correctly.

Reasons for the error

It is worth starting with the fact that this error occurs only on certain operating systems. Therefore, the message: "Printer sharing error 0x000006d9" can be seen on the operating system Windows 7 and Windows Silver R2 build 2008. But this does not mean that people working with these systems will definitely have it. This requires a few more "conditions".

One of the most mandatory is to have multiple devices connected to the printer. But in modern world this is more a matter of course than an exception. They are connected to any office with a printer using a special wire or through a common server.

The last reason for the appearance of such an error is the negligence of the users of the KP themselves. And it is the user of the administrator computer, with the help of which the printer was installed. If the firewall is disabled on this computer, then the error will constantly appear when requested from another computer. And when the printer is connected to the local network, this error will appear on all server CPs.

Solution to the problem

In order for the printer to be available to all computers, and not only to the administrator's computer, it must be shared. Sharing is the process of connecting a printer to a local network. In other words, granting access to the device to all users. Naturally, if there are more than 1 CP, this is a very useful option, in which, for the reasons described above, the following message appears: "error 0x000006d9 when sharing a printer."

The reasons for its appearance are described above, but how to fix this problem? Most try to reinstall the system, PC or printer drivers. But this will not bring results. Therefore, a frustrated user may end up contacting service center and spend your money.

However, you can do without such drastic measures and solve the problem in a few clicks. For a kind of repair, you just need to turn on the firewall and the window will disappear. The program itself can be found in the following path: click right click click on the icon my computer, management, in the services and application section, select services, then select the firewall itself and select the automatic startup type.

The pop-up issue will be resolved automatically. However, some modern printers have many additional features and accordingly a large package of drivers. At the same time, they are capricious to mistakes of any kind. So you need to be prepared to restore drivers or reinstall them, but this happens very rarely.

From all this it follows that it is not always necessary to disable the Wibdows firewall, as it protects the PC from network interference, which is the provision of a printer for the local network.

The operating system from Microsoft provides various functionality for people to use. Including the ability to run printing equipment from several computers at once. Naturally, this tool must first be activated. This is not always successful. For example, the following message may appear on the screen: "Unable to complete operation error 0x000006d9".

It is quite logical that the error 0x000006d9 when sharing a printer automatically nullifies a person’s desire to use such functionality. Of course, you can refuse to use it. But this is extremely inconvenient. You will have to keep a separate PC for printing in the same office, which you will need to constantly go to, that is, waste extra time for employees.

Therefore, if the status "0x000006d9 Windows 7 when installing network printer", then it needs to be corrected.

Correction instructions

So, if a window appears on the screen where it says “failed to save printer settings error 0x000006d9” or something similar, then the following sequence of actions is recommended:

Through the "Start" button, go to the internal search line.
Drive "services.msc" into it. Click on the option to run with admin rights.
In the proposed list, find "Windows Firewall". Using RMB on the name, call up the submenu and select the “Properties” option in it.
Another window will open, where you should go to the "General" tab. Pay attention to the "Startup type" subsection - set the value "Disabled" in it.
Check the result after clicking on "OK". If it does not help, then continue treatment.
Through the entire tighter "Start" button, first go to the "Control Panel", where select network and sharing management.
In the left column of the new window, click on the change of additional parameters - the lower of the two options.
You will need to set permissions to access files / printers and to access the network.

Of course, before checking the result, do not forget to save all the adjustments made. Otherwise, nothing will work.

Owners of a personal computer or even several often encounter such a problem when they cannot save their own printer settings. In this case, errors such as 0x000006d9 or 0x00000842, which are incomprehensible to the user, are displayed.

Windows XP often writes that it was unable to save the printer if networks are created local type for a few personal computers that are linked by the same printer.

However, after trying to share access to the printer to other members of the local network, a number of errors begin to appear due to the fact that its settings cannot be saved.

What will be discussed:

Failed to save printer settings error 0x000006d9

In the event that it was not possible to save the printer settings and at the same time error 0x000006d9 is issued, then this most often occurs due to the fact that Windows XP is disabled. In order for the error 0x000006d9 to disappear forever, you should do the following chain of operations:

press "Start";
find "Control Panel";
find "Windows XP Firewall";
in the event that the browser is not branded, then it is worth disabling or temporarily uninstalling the antivirus, and then installing it in local system a printer.

It is worth noting that the reason that the user was unable to save the printer settings may also be that the browser itself is disabled in full or in part. In order to correct the situation, it is worth adjusting the parameters by pressing the "Use recommended parameters" button.

If the firewall is disabled, then it should be enabled, thereby eliminating the error 0x000006d9.

What to do when error 0x00000842 appears

Error 0x00000842

In the event that you have completed the above steps, but still failed to save the shared printer settings due to error 0x00000842, then you should check the system for viruses or check if the antivirus is working correctly.

In the event that error 0x00000842 repeats, you can resort to drastic measures by disabling or rewriting your antivirus or firewall.

Problems saving printer settings error 0x00000001

Error 0x00000001

Error type 0x00000001 may be related to the tcpip.sys and ntoskrnl.exe, win32k.sys and psi.sys, raspppoe.sys and ndis.sys drivers.

In this case, the display of error 0x00000001 using the blue screen will disappear if:

the OS should be updated;
you can solve problems in the Win32k.sys system type file again by updating operating system Windows XP.

Failed to save printer settings 0x0000070c

In the event that the user was unable to save the printer settings due to error 0x0000070c, it is worth dealing with Windows 7. It is worth clarifying that an error like 0x0000070c most often occurs on a 64-bit version.

However, if the HP printer settings could not be saved due to system error 0x0000070c, then you need to check the installation of drivers for 64 and 32-bit versions. If the wrong driver is installed spool\drivers\ w32x64\3, then the file path must be set manually.

You can try to solve the 0x0000070c problem using the registry by following simple instructions with restarting the print manager.

If you are reading this article, then most likely your job is an office type. And all because the authorities save money and consider it inappropriate to buy a separate printer for each working machine. System administrators or acquaintances, with the honorary title of "tyzhprogrammer", set up a local network, with the help of which the general access to one MFP is realized. But one day, a message may appear on the monitor with the text: "failed to save printer settings error 0x000006d9", as a side effect of over-saving. Let's see how to get rid of this.

When does the error occur?

Usually, given error occurs after a change in the software or hardware configuration of the equipment. It is connected with the Windows Firewall turned off on the computer.

There are other reasons as well. Their essence lies in incorrect setting local network or physical malfunction network equipment or computer equipment.

Troubleshooting

For the printer to work correctly (assuming there are no problems with the network and equipment), you need to install the MFP with the firewall turned on. If necessary, after performing the necessary actions, it can be disabled.

Let's consider all the steps in detail:

Click "Start" - "Settings" - "Network and Internet".
On the Ethernet tab, click Windows Firewall.
In the window that appears, click on "Turn Windows Firewall on or off".
Select "Enable" as shown in the screenshot and click "OK".
Next, you need to enable printer sharing. To do this, go to "Settings" - "Devices" - "Printers and Scanners".
Select required device and go to Manage.
In the window that appears, click "Edit Properties".
In the "Sharing" tab, check the box next to "Share this printer" (this option is not available on my device).
Ready!