Mobile

ZTE network equipment: setting up routers for Rostelecom. Detailed instructions for properly setting up a ZTE router Connecting a zte f660 modem

Rostelecom provides its subscribers with various equipment for rent, including routers. The company is not engaged in the production of equipment, but in world practice a scheme is widely used in which the manufacturer supplies the provider with equipment without a logo, and the provider already applies his own. Rostelecom does the same (it cooperates with huawei, zte, eltex, sagemcom, etc.), which means that customers may have different models. In this article, we will look at universal ways gaining access to the router settings.

How to enter the router settings

So, you got a router for rent or bought it, came home and want to set up the Internet or make any other settings (for example). To do this, you need to open the package, connect power and cable to the router, but not the one that comes to your apartment from the entrance, but which will connect the router to a computer or laptop. Connect the other end of the cable to your turned on computer. For most router models, the admin panel is available at 192.168.1.1 or 192.168.0.1 . Enter one of them in address bar your browser and press enter.

After that, you should see a window for entering a username and password.

The login and password for entering are indicated in the operating instructions for the router, but if you could not find such information there, then try the following combinations:

If one of the combinations is suitable, then a page with available router settings will open in front of you.

If these options do not work, then you need to perform a factory reset. To do this, find the Reset button on the back wall and hold it down for a few seconds with the router turned on.

Basic settings of the Rostelecom router

The first tab of the router settings displays a summary of information about current state devices. Here we do not make any settings.

On the second tab, the Internet connection is configured. Select the interface you need (in our case, PPPoE/VPN) and click on the "add connection" button.

In the window that opens, you need to select a protocol, come up with a name for the connection, enter a username and password for accessing the Internet ( this information should be in your contract), as well as the server address. Leave the rest of the items in the "auto" state.

If you have multiple computers at home, then next tab you can give each device its own ip address on your home network.

The next tab is responsible for WiFi setup. Here you need to set the name of your network, select the type of encryption and come up with a password.

The manufacturer regularly releases firmware updates in which it fixes errors found by users and adds new functionality to the device. That is why it is worth checking regularly for available updates. Go to the settings tab and find the "update" item there. The screen will display the version of the current firmware and available for updating. All that is required of you is to click on the "install" button.

As you can see, with minimal knowledge, you can produce self-configuration router without calling a company specialist. Ask questions in the comments and we will help you, but for now we recommend watching a video on this topic.

Router ZTE ZXA10 F660 - modern network hardware required to connect to the worldwide information network via fiber optic line (GPON technology). In terms of its functionality, it is both an ONT terminal and wifi router, capable of distributing the Internet both via an Ethernet cable and using wireless communication with the end device.

Apart from standard features The zxa10 f660 router also provides VoIP functionality and the ability to create a local Web server based on the router.

And this article presents step-by-step instruction on setting up the zte zxa10 f660 router from MGTS, as well as some of the subtleties of connecting this device.

Router zte zxa10 f660: specifications and design features

The gpon ont zxhn f660 router is an economical mobile wifi transmitter with a main operating frequency of 2.4 GHz.

The functionality of the router provides a Wi-Fi data transfer rate of up to 300Mbps, while the device supports up to 4 SSIDs with simultaneous connection 128 users per network.

Also, the zte f660 router supports WPS mode, so the device can be used to expand the WiFi zone of another router.

On the back of the router are:

- standard LAN connectors for connecting to zxa10 f660 devices via an Ethernet cable;
- two POTS connectors for implementing the IP telephony function (for connecting telephone cable RJ-11);
- two USB connectors for connecting external media (including for updating the device's firmware and organizing a local Web server);
- POWER connector for connecting the power adapter;
- on/off buttons for WLAN and WPS functions;
- RESET button to reset the router to factory settings;
- switch on / off the router.

The GPON connector for connecting the fiber optic cable provided by the provider can be located both on the back and on the side panel of the zte f660 router.

Connecting a zte f660 modem

1. Connect the power supply (supplied with the device) to a 220V electrical outlet, and its plug into the socket on the rear panel intended for it.

2. Connect the optical cable with the green plug to the port intended for it, and its other end to the socket.

3. Insert the plug of the patch cord (Ethernet cable) into one of the four LAN jacks, and its other end into the network card slot of the computer from which the router settings will be entered mgts gpon zte zxa10 f660.

When you connect the router to a PC, the indicator corresponding to the active LAN connector should light up on the front panel of the device. If this does not happen, it is recommended on this computer.

How to set up a zxa10 f660 router?

Connecting, testing and configuring optical communication, as a rule, are carried out by specialists of the company-provider of communication services.

If you install the zte f660 optical modem yourself, then call the provider's service department, ask them to set up the equipment and follow the instructions of the specialist.

Router zte zxa10 f660: WiFi setup

1. Launch any Internet browser installed on your computer and enter http://192.168.1.1 in the address bar.

In the field that appears, enter the login: admin, password: admin and enter the setup interface of your device.

2. A menu with tabs will appear in the window that opens: "Status", "Network", "Security", "Application", "Administration".

3. Go to the "network" tab, in the "WLAN" submenu and its "Basic" subsection.

In the "Wireless RF Mode" column, select the "Enabled" option.

- Next, "Mode" must be set to "Mixed802.11b + g + n".
- "Country/Region" - "Russia".
- "Chanel" - "Auto".
- "Transmitting power" - "100%".

4. Click the "Submit" button, then go to the "Multi-SSID Settings" subsection.

In the "Choose SSID" column, select "SSID1".

- Check the "Enable SSID" box (Check that this box is unchecked for other SSIDs).
- Think of a name for your network and enter it in the "SSID Name" field.

5. Click the "Submit" button again and go to the "Security" subsection.

- Here in "Choose SSID" select the first option.

- Set "Authentication type" to WPA2-PSK.
- Create a password WiFi networks and enter it in the "WPA Passphrase" field.

The password must be unique and contain at least 8 Latin characters. Standard and easy-to-guess passwords (for example, the address of the house) are not recommended to be set in order to avoid unauthorized connections to your WiFi network.

How to change the password from the MGTS zte f660 router?

To set a unique administrator password used to enter the settings of the MGTS gpon zte zxa10 f660 router, go to the "Administration" menu and the "User Management" submenu.

- "User Right" switch to "Administrator".

Enter Old Password in the "Old Password" field, and New password in the "New Password" and "Confirm Password" fields.

Also, before using the zte f660 router, it is recommended to disable the WPS function. To do this, press the corresponding button on the back of the device.

The router from the manufacturer ZTE is a model that can only work on FTTB lines. Setting up the ZTE ZXHN H118N Rostelecom router can be done both using the wizard built into its program, and in manual mode. IPTV and SIP telephony are supported.

Login can only be done after connecting the ISP cable to the WAN port (RJ-45) on the back panel of the ZTE ZXHN H118N Rostelecom router. One of the 4 ports of the LAN router (RJ-45) is connected by an Ethernet line with a connector network card computer (PC) or laptop used for setup. You must first set the automatic mode for obtaining addresses by the device on the Internet Protocol version 4 page.

According to the information on the sticker, it can be seen that the IP address of the device is 192.168.0.1 - and its authorization data is used by default: username - admin, password - admin. The network address is entered into the address bar of the web browser used on the PC, and information about the login and password is required to fill in the fields of the window that opens.

The router program requires the provider cable to be connected to the WAN connector, and the first login page will remind you of this in case of violation necessary condition. If the router detects an Internet connection, then the page looks different. Suggestions appear on it about choosing a time zone and the need to change the factory password with the corresponding information fields.

After fulfilling the security requirements, you must click on the "Continue" stencil and go to the next page. On it, you need to select the proposed configuration method: "Start the wizard", "Configure the device manually".

How to make the menu complete

Rostelecom router is configured after selection manual setting. To enter the menu, you need to enter the data of the username - admin - and the created individual password. Clicking on the Login tab will take you to start page router interface with general information about the device. The item "Network" in its left part opens the possibility of choosing the type of WAN connection.

When configuring, the data provided by the provider when concluding an agreement with him is used: type of Internet connection (PPPoE), number of the included VLAN (optical fiber) and its priority, username and password. Connection to be created should be "Always On". The entered data is saved when you execute the "Edit" command at the bottom of the page.

To use the TV function, you need to re-open the list of possible WAN connections and select IPTV from it. In the connection type line, use "Bridge" and then execute the "Create" command. The field of this is necessary in the WAN section of the main menu, go to the "Port Binding" item.

It produces program purpose connectors LAN1-LAN4. For PPPoE, LAN1-LAN3 ports are selected by default. Computers will be connected to them. For IPTV, you need to assign LAN4. A set-top box will be included with it, which will use it over an Ethernet cable line. After setting the checkboxes in the selected cells, click the "Save settings and confirm" button.

Setting up Wi-Fi on an Ethernet router ZTE H118N

Router manufacturer ZTE provides its products with configured wireless WiFi connection. Information about the network name and access password can be found on the label on the router case. But the connection setup can be done manually. To do this, in the VLAN section ( Wireless network) the menu should select the item "Setting Wi-Fi networks".

On its page, you can change the factory settings to your own. After selecting the "Security" item, it becomes possible to change the authentication type and encryption algorithm. Finally, click the Save button ("Apply").

Popular Settings

Apply automatic tuning router Rostelecom after the proposed change of the factory password. If after that you click on the "Start Wizard" stencil, then in the next step you need to select and specify the region, branch and service of Rostelecom. After continuing the settings, you must fill in the login and password fields issued by the provider when concluding the contract. If the branch uses "Dynamic IP", this data will not be needed.

When connecting a set-top box, it must be assigned a LAN4 port. After continuing, the wizard will prompt you to change the authorization data. You can do this and continue. The next page prompts you to enter the settings with the new Wi-Fi network values, administrator name and password, click the "Save settings" button.

Rostelecom

Any of us from time to time is faced with the need for a router option, using which we connect to the Web. Here, if you are the owner of a router from Rostelecom, your company will need the following information under any circumstances.

It remains for our client what is useful for you - a router, a laptop or a computer with Wi-Fi function and a little extra time. First of all, you need to open a successful Internet browser for you and in the search bar enter the address of the router, which you will find on a sticker on either top panel devices.

It consists of numbers and dots: for example,

192.168.1.1

When entering the correct number, wait for the authorization window, where you will be asked to enter your personal data as a Rostelecom subscriber. After that, wait for the necessary settings to appear.

Tune

router

via Wi-Fi module

If your router does not have a connection to the computer via a patch cord, then you need to spend time on the ability of the equipment to work with the Wi-Fi function. Just turn on the router and go to the "Network Center" to make sure it's active wireless connection the Internet.

Read also

How to determine under which operator the iPhone is locked by IMEIWhile buying an iPhone abroad, for its subsequent opening activity, it is extremely important to find out under which operator it is locked in order to assess how difficult the process will be ...

How to remove the screen lock on a Samsung phone? Screen lock is a reliable method android protection devices from third parties. Many Samsung phones this tool is pre-installed, so anyone can use it. If numbers...

The popularity of tablets in Russia is growing not from year to year, but almost day by day. There are more and more new devices in both the premium and economy sectors, with the latter not far behind the performance of expensive models. Use pl...

How to disable the screen lock on AndroidThe lock screen is a great way to protect android smartphone from outsiders accidental clicks which is to provoke the leakage of personal information in another way unwanted calls. However, with blocks...

Disassembly Lenovo laptop Ideapad B590. Cleaning the laptop from dust and replacing the thermal paste. Main page » Disassembling the Lenovo Ideapad B590 laptop. Cleaning the laptop from dust and replacing the thermal paste. Disassembling the Lenovo Ideapad B590 laptop. Cleaning laptop...

It's almost 2020 and android phones ALWAYS unable to record more than 4GB of 4K 60fps motion footage. The camera app doesn't stop recording completely despite this. It's just that your entry will be split into...

To activate the connection, you must set up Wi-Fi and enter a password for it. When setting up the modem for the first time, the password has not yet been invented, and you can create it in the router settings menu. Wrong password It could happen that

router

Setting up a ZTE modem

ZXHN H208N

Setup of the ZTE ZXHN

H208N modem

Modem setup ZTE ZXHN H208N router, WiFi setup, IPTV Setup of the ZTE ZXHN H208N modem in a router, the.

Setting up a wi-fi router zte zxhn h108n, internet, wi-fi, interactive TV, multiroom

Detailed description of DSL wi-fi ZTE router zxhn h108n, manual and master setup Internet, interactive TV, wi-fi.

In this case, you should reset the current settings to the factory settings: to do this, press the configuration reset button deeply hidden in the router. Hold the button for a couple of seconds until all buttons on the router are lit.

Read also

HTC Sync and HTC Sync Manager HTC Sync Manager keeps your HTC devices in sync with your computers. Supported by our client remains latest smartphones HTC One, Desire, Butterfly series and more.HTC Sync Manager provides sync...

Why Odnoklassniki is not openingHere are a few reasons why Odnoklassniki and Contacts are not enabled, and what to do if you see on your page in in social networks that your Account blocked or something like that.Suddenly you are completely...

Change of matrix, screen, LG LCD (LED, 3D) TV No need to be surprised if your LG LCD (LED, 3D) TV has failed, our client is left with what exists, that our client is left with LCD TVs very sensitive to any, even the most the smallest mechanic...

Often, iPhone users come up with the question of how to put a melody on iPhone call. After all, everyone wants to install such a ringtone on an iPhone so that it amuses the ear. Setting the music for the call is not particularly difficult if ...

To you, P20 Pro Huawei almost a year though This phone still remains one of best phones in manufacturing.Pro arrives, flaunting a 6.1-inch AMOLED display, smart triple rear camera and a fast Kirin processor. Although...

Cash. quite an old instrument. He became a part operating system in the earliest Windows versions. Cache. it is a system repository that allows you to store the information needed to random access memory. This tool allows...

Now wait full reboot device. You can then enter your username and password below. If everything went right, the browser window should display

settings menu

devices. In the event that this did not help, you should think about the malfunction of the router. The first step is to seek help from qualified professionals.

Classification of settings

settings menu

device, you have the ability to change the parameters of the router at your discretion. They are of the following types:

Settings for creating and changing a password and name;
Setting a password for Wi-Fi;
Configuration of the router with the Rostelecom server;
Regulation of the connected equipment;
Blocking the ability to connect inappropriate devices;
Change of equipment hierarchy

When you can’t enter the settings of your router on your own, you should turn to more experienced Rostelecom specialists for help. To do this, you can use the contact number of the operator or the form feedback on the official website of the company.

Post Views: 10