Games

How to set up a microphone in headphones on a laptop. Connecting different types of headphones

How to connect headphones to a computer? If you are a modern person, and at the same time also a music lover (or movie fan), then at least once in your life you have already had to (or will have to in the near future) ask this question.

At first glance, it may seem that there is nothing complicated and incomprehensible in such a seemingly elementary task as connecting headphones to a computer. It's a delusion!

Please note that in general this audio device is connected either to the rear or to the front panel, although there is also a very popular wireless model.

1. How to connect headphones to a computer. Back panel

1. Try to arrange in such a way that the connection process is controlled not by touch, as is often the case, but visually. Remember that ideally, the connecter needs to see both the location of the sockets and their color marking. The computer can be left on.

2. Decide on the desired socket. Here underwater pebbles can lie in wait. If your headphone plug is narrow, then all you need to do is simply find the appropriate light green connector. But if you have purchased an audio headset equipped with a large-diameter plug, say 3.5 mm, you will have to purchase an additional adapter. It also happens that initially the headphones are equipped with a USB plug, in which case you just have to plug into any free connector on the rear panel (they are all equivalent). from phone to computer? If you cannot do this directly, you will also have to purchase a special adapter device.

3. If you did turn off the computer before connecting the headset, boot it up. If not, just wait a few seconds until it detects the presence of a new device. Ready? In principle, in most cases, you will not need anything else. Headphones are ready to use.

2. How to connect headphones to a computer. Front Panel

Now connectors can be found not only on the back panel that we are used to, but also on the front, and even on the keyboard. What for? Yes, it's just that the length of the wire does not always allow you to connect freely and without tension to the back panel of your system unit, which, as a rule, is standing on the floor.

1. You often encounter the following situation: the purchased computer has all the connectors necessary for audio devices located on the front panel, but the cable is not connected to it. How to check it? Turn on the computer, wait for the operating system to load, launch any audio player of your choice, insert the headphone plug into the green port on the front panel. Your audio device is considered to be working if, when properly connected, you hear sound coming from it, and not from the speakers.

2. If it so happened that the internal loop still turned out to be unconnected, you can try to solve this problem yourself. To do this, experts recommend turning the back of the system unit towards you. Inside you will definitely see two wires with jack 3.5 plugs. One of them is for speakers or headphones (green), and the second is for the microphone (pink). Just plug in the connectors you need.

3. If the sound continues to not come to the front panel of your computer, then most likely you will need to contact service center or to the computer store where the product was purchased.

3. How to connect headphones to a computer. Wireless connection

1. First of all, make sure that a special adapter is included with the purchased device. Without it, you will not be able to connect headphones.

2. Connect this same adapter to the appropriate one. As a rule, drivers are loaded automatically and after a few seconds a message will appear on the monitor stating that a new device has been found and prepared for use.

3. Do not forget to install batteries in the headphone case. If the audio device itself has a switch, turn it on. Your device is ready to go!

Few users of modern devices do not know how to connect headphones to a computer, but not everyone can solve the problems that arise when connecting. Consider some of the nuances of connecting and configuring headphones for their quality work on various operating systems.

Connecting headphones to a computer is not a difficult task, but sometimes there are difficulties directly when setting up the equipment. Almost all PC models have sound card. It can be built into the motherboard, or you need to connect to it through a special connector. In any case, the gadget can be connected either to the back of the computer or to the front (if there are appropriate sockets).

By looking at the figure below, you can understand how to connect headphones with a microphone to your computer.

The headset output is always green, and the microphone input is always pink.. Since gadget plugs are also colored in the appropriate colors, it is very difficult to make a mistake and insert them into other connectors. It is required to insert the green plug into the green socket, and the pink plug, respectively, into the pink one. In the pink socket, you can connect both a microphone from headphones and a third-party microphone to the computer. After that, the connected equipment is configured using special software (in Windows 10, as well as in versions 8 and 7, the configuration should take place automatically).

On a laptop, gadgets are connected in the same way. The manufacturer may place connectors on front panel device or on the left.

Headset jacks are sometimes made tight on laptops to increase their lifespan. Therefore, do not be afraid that the plug does not fit well into the socket.

It should be noted that it is the headset plugs designed for computers that have color coding if a headphone microphone is provided. The plugs of the rest of the headset have no difference in colors. There is a headset, for example, for phone, which has not 2 plugs, but one, in which the contacts for the microphone and audio channels are combined. It clearly shows 3 strips separating the contacts. Two contacts are used for connecting audio channels, and one for a microphone.

New laptop models have combination socket, to which you can connect headphones with a microphone that have one plug.

A special marking is placed near such a connector. If there is no such socket, but there are 2 standard ones, then such a headset can be connected via special adapter.

Thus, it becomes clear how to connect headphones from your phone to your computer. Headphones on the front panel are connected according to the same principle: if there is a microphone on the headphones, then it is connected to the pink jack, and the audio channels to the green one.

Connecting the headset to a PC

Now you know how to connect headphones to your computer. But this action is not enough for the gadget to work properly, although most often it immediately starts working, and nothing needs to be configured. But there are times when the connected gadgets do not work, so you need to take some action.

Connecting a headset on Windows 7

Before setting up the headphones on a Windows 7 computer, you need to connect them on the back or front panel of the device to the appropriate connectors (you already know how to connect it correctly). Then you need to start playing the music file. If there is sound in the headset, then the connection can be considered completed. If there is no sound, do the following in the headphones on the computer (this instruction is also suitable for setting up the gadget on a laptop).

The above settings can be applied to the operating room as well. Windows systems 10 (Windows 10) if you don't know how to enable the gadget directly in it.

Microphone setup

Before using the microphone in Windows 7 or 8, as well as in Windows 10, it must be configured.

There are also headphones with a microphone that can be connected to a computer via a USB connector. In most cases, after connecting them, the configuration occurs automatically.

If you are a fan of screen time personal computer, regularly call friends or family using Skype, and also like to listen to the music of your favorite artists, then you simply cannot do without headphones with a microphone. Often, the question arises among users, how to connect headphones with a microphone to a computer? Experienced users will say that there is nothing complicated here: just insert the plug into the connector and enjoy the operation. But not everyone looks as simple as there are different types of headset. Some people choose the wrong device for their operating system and always forget to manual settings that help to achieve best quality. Let's pay attention to the main points and solve the problem together.

A little about the main

When connecting, you first need to determine if there is a sound card inside your PC case. Most often, it is located on the mother card or taken out by a separate component in system unit. In the absence of this detail, you will have to walk around the shops in search of it. If the audio processing device has been selected and purchased, then the next step is to install the software latest version.

Important! For communications, a budget model is suitable, which has all the necessary connectors to establish a connection.

Next, you need to carefully read the contents of the instructions that come with the device. The document should describe exactly where the headphone interface is located. Often there is a special icon above each connector that will tell you about the purpose of the input. Also, the pins are colored: green is used to connect the headphones, and pink or red is used for the microphone. In order to connect headphones with a microphone to your computer, you should follow these steps:

Install the special connectors from the headset into the appropriate sockets, which are located on the back or front panel. It is worth noting that all modern models have the ability to establish a connection from the front side.

Important! It is possible that immediately after these manipulations your device will work, but manual settings are often required.

Next, you will need to make sure that the operating system has required drivers latest version. The OS does the installation on its own, but it would be better if you put native software on your own.
If the software is installed, but the headset has not yet begun to delight you with its work, go to the tab with recording devices and set your microphone model as the default device. In cases where this column is not displayed, use right click mouse and display the technique using the menu called "Show Disabled Devices".
It happens that even after these actions no reactions follow. In this case, try to get into the driver of your sound card and select the “Disable detection of front panel inputs” function (for Realtec owners), or specify “AC97” in the front panel settings instead of the “HD Audio” parameter (for owners of software from VIA).

Important! Most often, connecting a microphone is not a problem, but sometimes you need to properly configure it. To avoid problems with sound, check out the article.

Different types of headphones

It doesn't matter which headset you use, the main task is to find the right connector for the connection. If necessary, you can use a special adapter that will help you avoid short circuit devices. We recommend that you take a look at the nuances of establishing a connection for different types.

Headphones with microphone

Such devices are equipped with two outputs. To connect the component to a PC, you should find the appropriate sockets on the latter's case. Also be sure to check the availability of the required software. Just go to the control panel and open the “Sound” tab, and from there go to “Recording”. In the window that opens, check the operation of the device.

professional equipment

Here are considered those models that are used on TV and radio. These headphones are distinguished by a plug that has a larger diameter (6.5 mm). These gadgets can also be used on a regular connector if you buy a special adapter.

You can try to recreate such an adapter on your own: take a classic 3.5 and connect it to a larger diameter socket with a wire.

Important! Experts say that such adapters significantly increase the load on the connector, which jeopardizes its service life.

Old models

Such devices have a very old output of the ONTS-VG type, which, without desired adapter you won't be able to connect. The latter can be created independently for this case.

Important! Seasoned radio engineers are aware that similar connectors were placed on the old TDS brand headset. Perhaps such gadgets are outdated long ago, but they are not far behind in terms of sound reproduction quality.

To carry out such work, an ohmmeter is useful, which is often installed in the “classic set” of any multimeter:

Using a meter, check the pinout of all contacts on the connectors: if it is connected between the output and the common channel of one of the two contacts, characteristic clicks will be heard. If these sounds are heard in two channels, then such a connection is suitable.
After identifying the channels, start making an adapter using the same jack plug.

If you spend most of your time at the computer monitor, chat with friends or colleagues via Skype, or just want to listen to your favorite songs, then you can't do without a special headset. A very common question is how to connect headphones with a microphone to a computer. Indeed, at first glance, there is nothing complicated in this process: you connect the plug to the desired socket - and you're done. Unfortunately, it's not that simple! First, there are several types of headphones. Secondly, you need to choose the right headset for your operating system. Thirdly, most often you can not do without manual settings. In general, this procedure will require your attention and patience.

Fundamental rules

The first thing to do is to determine if your computer has an audio card installed. Its usual location is motherboard or a separate connector in the system unit. If it is missing, then this device you need to purchase, because without it the headphones will not work. After purchasing a sound device, you need to install the appropriate drivers. By the way, an inexpensive model is quite suitable for communication, the main thing is that it has jack connectors for the necessary headset.

Then you need to carefully read the instructions in order to identify where the headphone jack is. Usually, there is a special icon next to each connector. Also, each jack has its own color: the microphone is pink, and the headphones are green.

So how to connect headphones with a microphone to a computer?

First of all, you need to insert the connectors from the headphones and microphone into the corresponding sockets on the rear panel. By the way, in new models of computers, the connection is made through the front wall of the system unit. Sometimes after these manipulations the headset starts working, but in most cases you need to make manual settings. The next step in the settings will be to check for a driver for the sound card. Each program installs them by default, but the best option would be to install the native software. If you are convinced that special program is on your PC, but the headset still does not work, here's what to do. Enter the Recording Devices tab and set the microphone as the default device. In the event that this column is not displayed, then click on the right mouse button and select the "Show disabled devices" item.

If the headset does not respond when connected through the front wall of the system unit, then you need to go into the audio card driver and do the following:

if an audio driver from Realtek is installed on your PC, then you need to select the "Disable front panel input definitions" function;
if your software is from VIA, then go to the front panel settings and specify AC97 instead of HD Audio.

Connecting different types of headphones

It doesn’t matter which headset you use, the main thing is to figure out which connector to connect it to. And if necessary, choose an adapter that eliminates the occurrence of a short circuit and, as a result, a breakdown of the device.

Connection different types audio equipment consider below.

Microphone device. This model has two connectors. In order to connect them to a PC, you need to find a socket labeled mic. Another important point: for high-quality work, headphones need to be properly adjusted software on the computer. You can do this in such a simple way: select the start window, go to the "Control Panel" and open the "Sound" function. Then open the "Record" window and check if the microphone input is enabled, if not, connect it.
Professional devices. This refers to the headphones that are used on radio stations and television. Its main difference is the plug, which has a diameter of about 6.5 mm. Such devices can be connected to a regular connector, but do not forget to purchase a special adapter. According to experts, such a connector loads the socket very much, which threatens its failure. There is another way when the adapter can be made independently. To do this, you need a plug with a diameter of 3.7 mm and a 6.5 mm socket, which must be connected using a wire with a copper core.
Old equipment. Headphones that have an old 5 din plug (ONC-VG) cannot be connected to a PC without an adapter. You can make it yourself. Radio engineering specialists know that such connectors are located on the old TDS brand headset. And although this technique is outdated, but in terms of sound quality it is not inferior to many modern models. To do this, you need a tool such as an ohmmeter. With it, you need to check the pinout of the connector contacts: if it is connected between the input and the common channel of one of the two contacts, clicks will be heard in one. In the event that you heard characteristic sounds in two channels, then they have a suitable connection. After you have identified the channels corresponding to the stereo connector, start making an adapter. All you need is a regular ONTS-VG connector, which has 5 pins and a 3.6 mm jack plug.

So we figured out how to connect headphones with a microphone to a computer, no matter what equipment you want to use.

Rear panel connection

This headset has been very popular lately. This fact is explained by the fact that more and more users communicate via Skype and use such equipment for similar programs. Also, these devices help to keep in touch with partners in network games. However, there is a problem: they often do not want to work on older PCs that are not equipped with the appropriate sockets.

How to connect headphones with a microphone to a computer (Windows 7) to the back? First, for this you need to determine whether the system unit has a connector for a stereo headset. After that, you need to make sure that you have connected the appropriate cable to the stereo jack. This guarantees high-quality sound and long-term operation of the device.

How can this be checked? To do this, you need to carefully look at the plug, it should show 2 black lines. If you did not notice them, then you do not need to connect the device, as a short circuit may occur, which threatens to damage the equipment. If you are using regular headphones, then be sure to buy a special adapter that eliminates the risk of fire. You can buy it at a radio hardware store or make it yourself.

The most suitable option for connecting to the rear panel is a standard stereo device with a 3.6 mm jack cord. In this case, the headset can be connected directly to the green jack of the audio card. If the connectors do not have a color difference, then you can navigate by the Phones icon, which is always located near the desired socket.

Front panel connection

Jacks for audio devices on modern models system units are most often placed on the front wall. And this is very convenient, because all the connectors are in plain sight and it is easy to find the one you need.

Before connecting the audio headset to your PC, regardless of the operating system, you need to install software from Realtek. These are the most popular electronic devices controls that can be found in almost every system unit.

How to connect headphones with a microphone to a computer on the front panel? The procedure is as follows:

First, pay attention to the sockets: the one that is intended for headphones has a corresponding icon next to it. The microphone must be connected to a different jack. As already mentioned, next to the nests you will see special icons. In addition to the images, you can distinguish the plugs by color: the headphones are green, and the microphone is pink.
The second step is to launch Realtek, which you will find in the tray. For those who don't know, the tray is the notification area or one of the toolbar items on the desktop. In the window that appears on the right, you will see jacks for connecting audio devices. The active connectors will be highlighted with a bright tint, and the disabled ones will be a little blurry. To activate them, you need to open the folder with the parameters of the socket connectors, which is located at the top of the menu. After opening it, you get access to their management. Then you need to select the "Turn off detection of front panel connectors" function, after which you can determine the jacks to which you want to connect headphones.
Then you need to connect the microphone. Open the "Select Devices" and select the headphone or microphone icon from the list. It is highly recommended to test a new headset, for example, on a smartphone. Since there is a risk that you will spend a lot of time connecting faulty sound devices.
Simultaneous connection of headphones and speakers. There is an opinion that they can only be connected to special sockets, but this is not so. You can solve this problem with a fairly inexpensive splitter, to which you can connect two or more audio devices at once. But before that, make sure that your amplifier can withstand such a voltage.

Setting the headset to "Windows 7"

This operating system is very popular in this issue. How to connect headphones with a microphone to a computer (Windows 7)? Step-by-step instruction as follows:

First, you need to determine the purpose of the jack connector: stereo or not. If this is so important to you, then connect a suitable stereo plug to the audio jack. The best way- headphones with a 3.6 mm jack connector. In this case, the connection goes directly to the green socket. If you purchased a professional headset, then you need to make or buy an adapter, because such equipment can damage the audio jack. If the headphones are old, then you can’t do without an adapter device, which you need to make yourself.
Then you need to set up the software. For this operating system, the driver from Realtek is best suited. After it starts, activate the disabled connectors. Then, through the "Connectors Options" option, check the box "Turn off detection of connectors on the front panel." After these manipulations, you will find the jacks to which you need to connect sound devices.
If everything is in order with the software, and the headset still does not work, then you need to perform the following steps. Go to the tray folder and open "Recording Devices" where the default device is the microphone. Otherwise, activate the "Show disabled devices" item.
If the headset does not work through the front panel of the system unit, then you need to go into the audio card program and fix something. If your driver is from Realtek, then you need to select the "Disable setting of front panel connectors" function, and if VIA, go to the settings and specify AC97 instead of HD Audio.

Setting up a headset on Windows XP

Headset setup varies for different operating systems. But there are a few points that you need to complete, regardless of which "Windows" is installed on your PC. First of all, you need to check if your computer has a sound card. If you don't have an audio device, you need to purchase one and install the appropriate software. If you need an audio headset only for communication, then you can buy a standard, inexpensive model with connectors for audio devices.

Then, by identifying images or color differences, you need to determine the placement of sockets for sound devices. Next, connect the headset and start chatting, listening to music, etc. In the event that the headset does not respond, you need to make settings.

How to connect headphones with a microphone to a computer (Windows XP):

First, you need to set up the microphone. To do this, go to the "Control Panel" and open the "Sound and Audio Devices" item, after which you need to open the "Speech" option.
Then through the "Volume" go to "Options" and go to "Properties", where you need to select the item "Microphone".
Check if the microphone is turned on, after which you need to go to the "Recording Level" and adjust the sound through the "Settings" item.
After the dialog box appears, select the inscription "Microphone Gain". If there are noises or a characteristic whistle, you need to move the device for talking away from the speaker.
Return to the "Speech" tab and check the operation of the equipment. Ready!

Setting up a headset on Windows 8

This operating system is relatively new, and therefore incomprehensible to many. It is for this reason that setting up sound devices seems to be a difficult task. However, it is not.

How to connect headphones with a microphone to a computer (Windows 8):

First, you need to find the appropriate connector for the connector, and you can find it by a special image. If you connect the headset through the back wall of the system unit, then be guided by the color.
Then you need to go to the "Search", for this, move the mouse cursor to the upper right corner of the screen. Find the "Sound" option in the context menu and open the "Record" tab, where you will see the active recording devices.
Under these devices, you need to find an empty column, on which you should right-click. After this action 2 items “Show disabled devices” and “Show disconnected devices” will open. They need to be activated, after which you can check the performance of the sound device.

This will be the answer to the question of how to connect headphones with a microphone to a computer (Windows 8).

Connecting via bluetooth

The only model that works based on Bluetooth technology, - This wireless headphones. In addition, you need your PC to have a special adapter, which is usually sold in a kit with sound equipment.

So how to connect headphones with a microphone to a computer (Windows 7) via bluetooth?

There are 2 types of adapters: external, which is connected to the USB port, and internal - it requires a driver to be installed.

To do this, go to the Windows 7 control panel, find the "Device Manager" column and open it. You will see a list where you need to find the "bluetooth" of the device. Then using auxiliary program(utility) activate the adapter on the PC. To do this, you can use the Blue soliel program, which is suitable for this operating system. Next, following the instructions in the instructions, connect the headphones. And finally, check if they appear in the list of "bluetooth" devices. After that, you can check their performance.

So we figured out how to connect headphones with a microphone to a computer ("Windows 7").

Connection for Skype

Popularity this service increases every day, as it is a very convenient method of communication. For its normal operation, you can do without high-speed Internet, but you can’t do without sound equipment.

The most popular operating system today is Windows 7. That is why more and more often users have a question: how to connect headphones with a microphone to a computer (Windows 7) for Skype? Step-by-step instruction:

First of all, you need to connect the plugs to the desired connectors: the headphones - in green, and the microphone - in pink.
There are wireless audio devices with a radio transmitter that you plug into a USB port. Then you need to turn on the headphones, after which a notification will appear on the monitor that the device is turned on and ready to use. If the hardware kit contains a disk with special software, then it must be installed and run.
If after this procedure the microphone does not work, then you need to perform the following steps. In the control panel, select the "Recording equipment" item and open the "Recording" tab. In the list, find the inscription "Microphone" and activate it.
Additional settings can be made in the Skype settings.

So we figured out how to connect headphones with a microphone to a computer for Skype.

Possible problems

Regrettably, but difficulties in the operation of sound equipment occur quite often. Thematic forums discuss the most common problems associated with a PC headset. And among the questions the leader is "How to connect headphones with a microphone to a computer on Windows 7?" . And all because annoying problems occur quite often on a PC that runs on this operating system.

Typical headset problems:

No sound . Solution: check the plugs when buying.
Nest not working. Solution: you need to check the jack, to do this, connect working headphones or speakers to it.
Incorrect settings in the mixing console. Solution: go to the tray, open the "Sound" option and adjust it.
The PC does not find the audio device. Solution - go to the "Task Manager", open the tab "Sound, video and game controls" and click on the "+" sign. If you see a question mark next to a device in the list, then you need to update the audio card software.

To listen to music through a headset on your PC without worrying about extra wires, you need to know how to connect Bluetooth headphones to your computer.

The instruction below is universal way connection that does not depend on the headset model or PC type ( or ).

After connecting the external adapter to the computer, everything will be downloaded from the official website of the manufacturer (Internet connection is required) or, and an active Bluetooth tab will appear in the task manager.

Rice. 4 - an example of using an external Bluetooth adapter

So, the module is working in normal mode, which allows you to proceed to further connection settings. Follow instructions:

Go to the additional tab (arrow "hidden icons"). By default, the icon is located here. basic management adapter . Click on the bluetooth icon and in the appeared context menu select the option to add a new device.

Rice. 5 - adding a new bluetooth device

Now take your headphones. Press and hold the power key until the colored power indicator lights up. Thus, you activate the gadget and it can be connected to a computer.

It should be noted that in bluetooth headphones, a color indication system is used to determine the status of the device. Depending on the gadget model and its settings, a certain color may show a different state. However, most manufacturers use red and blue diodes. They are what they mean active work devices.

In control window Bluetooth devices on your computer, wait for the name of your headphones to appear. This means that the computer has successfully identified the device. However, it is not connected yet;
Now you should click on the headphone icon. The system will ask you to enter a passcode to confirm the connection. Type four zeros in the text box. This code is suitable for absolutely all wireless headsets;
Wait until the connection is completed. As a result of a successful connection, an inscription will appear next to the headset icon in the PC window: “Paired”.

Rice. 6 - setting up the pairing of the gadget and the computer

Step 2 - Connecting Headphones and Testing Operation

In addition to successfully establishing a connection, some headphone models require additional configuration.

If you cannot hear sound immediately after pairing your devices, or if you experience intermittent failures, your system may not be set to audio playback mode.

Because of this, malfunctions occur.

Go to and open the sound playback manager window.

In the tab "Playback" select the priority device that will be responsible for playback.

In our case, you should click on "Headphones". Confirm the action and exit the settings window.

Now connect your Bluetooth headphones again. Henceforth, during the playback of audio tracks there will be no failures and stutters.

Rice. 7 - configuring the device to play sound in Windows

Connecting a wire free headset to Skype

If you connect bluetooth headphones to work with the program, please note that you need to additional setting headsets:

Turn on the application and open the "Tools" tab;
Click on the tab "Sound Settings";
A set of parameters for operation will appear in the right part of the window. In the "Microphone" field, select the bluetooth device connected to the computer. For speakers, also select a headset - it will be used not only for playback, but also for reading sound signals(like a microphone).

Rice. 8 - setting up reading and playing audio in Skype

Possible connection problems

If there is no sound in the headphones, check that the desired volume level is set in the mixer.

There is a separate field for headphones, do not confuse it with the speaker volume slider.

Rice. 9 - Headset volume adjustment

If you have made a connection following all the above tips and instructions, but the sound is not reproduced, you should update the drivers of the connected device and the built-in adapter.

To do this, go to the device manager and right-click on the tab with bluetooth devices. Select from the dropdown list "Update Configuration".

Rice. 10 - update adapter drivers

This action will be performed automatically if there is an active Internet connection.

On the manufacturer's website and install it. The procedure will take less than one minute.

Rice. eleven - automatic search and driver installation

If you are using an external Bluetooth adapter, you need to update the drivers for the USB Controllers tab in the same way as for the tab with the built-in communication device: