Mobile

Akado settings for ASUS RT-N15U router. Setting up a PPPoE connection

Setting Asus hardware RT-N15U

to connect to the Smile network

First, you need to connect all cables to the appropriate connectors:

Nutrition.
ISP's incoming Ethernet cable (to the appropriate WAN port.)
Ethernet cable from network card to any LAN port on the router. (usually indicated by numbers.)

For Windows XP:

Go to the menu , .

In the network connections window (Figure 1), click right click mouse on " ' and select ' Properties».

Figure 1. Network connections window in Windows XP.

In the window " Properties Connections by local network » (Figure 2) select « Internet protocoltcp/ipProperties».

Figure 2. Local Area Connection Properties.

In the window " Internet Protocol propertiesTCP/IP» (Picture 3) select:

· « »

· « Get addressDNS-servers automatically»

and click the " OK»

Figure 3. TCP/IP protocol

For Windows 7:

Go to the menu , , .

In the window " Network and Control Center public access » (figure 4) press .

Figure 4. Network and Sharing Center window in Windows 7.

In the window " Network connections" (Figure 5) find " LAN connection", right-click on it and select " Properties».

Figure 5. Network Connections window in Windows 7

In the window " Local Area Connection Properties» (Fig. 6)) select « Internet Protocol version 4 (TCP/IPv4) ” (NOT unchecking) and press the button “ Properties».

Figure 6. Local Area Connection Properties in Window 7.

In the window " Properties: Internet Protocol version 4 (TCP/IPv4) » (picture 7) select:

· « Obtain an IP address automatically»

· « Get addressDNS-servers automatically»

and click the " OK»

Figure 7. TCP/IP protocol

In order to get to the web interface of the router, open a browser, enter the router's ip address in the address bar (by default http://192.168.1.1) and go to this address (Figure 8).

Figure 8. Browser address bar

Setup using the Setup Wizard

Click the button Go to manual setting» (Figure 10).

Figure 10. Determining the type of connection

Select the type of WAN connection " PPPoE» (Figure 11) and press « Further».

Figure 11. Selecting the type of connection manually

Fill in the fields (Figure 12):

Username - your login to access the Internet (issued by the service provider)

Click " Apply all settings».

Figure 12. Account setup

Wait for the window with the message " Done!» (Figure 13).

Figure 13. Executing parameter save

Wait for the Internet connection test to finish (Figure 14).

Figure 14. Checking the Internet connection

In the next window (Figure 15), fill in the fields:

SSID - the name of the wireless network (you need to come up with it yourself, later it will help you distinguish your network from strangers)
Network key - a key to access the wireless network

Click the button Complete».

Figure 15. Wireless network setup

Wait for the window with the message " Done!» (Figure 16). Before this moment never unplug the router!

Figure 16. Executing parameter save

Subsequently, the result of the setting will be displayed (Figure 18). Click " Transition to the Internet» to start using the Internet.

Figure 18. Completing the setup

Your Internet asus router configured for pleasant work in the Smile network!

Manual setting of Internet access

To manually configure Internet access:

In chapter " Additional settings» select « WAN» (Figure 19). For the parameter " WAN connection type» select value « PPPoE».

Figure 19. Manual setting Internet connections - Connection type

Fill in the fields (Figure 20):

Username - your login to access the Internet (issued by the service provider)
Password - your password for accessing the Internet (given by your service provider)

Click " Apply».

Figure 20. Manually setting up an Internet connection - Authentication

Manual wireless network setup

To manually set up a wireless network:

Log in to the router's web interface.
In chapter " Additional settings» select « Wireless network » (Figure 21).
In field " SSID» Enter the name of the wireless network (you need to come up with it yourself, later it will help you distinguish your network from strangers).
For the parameter " Authentication method» select value « WPA-Auto-Personal».
For the parameter " WPA Encryption» select value « TKIP+AES».
In field " WPA preshared key» Specify the key to access the wireless network.
Click " Apply».

Figure 21 Manually configuring the wireless network

IPTV port setting

To configure the IPTV port:

Log in to the router's web interface.
In chapter " Additional settings» select « WAN» (Figure 22).

Figure 22 IPTV port setting

For item " IPTV STB port selection» select the value corresponding to the port to which the STB is connected, and click « Apply» (Figure 23).

Figure 23 IPTV Port Setup - IPTV Port Selection

Changing the password for the web interface

To improve the security of working on the Internet, we recommend changing the password for accessing the router's web interface. For this:

1. In the section " Additional settings» select « Administration", tab " System» (Figure 24).

2. In the window that opens, you will need to specify " New password" (the password that you will later use to access the router's web interface) and " Re-enter New password ” (accordingly, there you will need to re-enter a new password to access the web interface of the router).

Figure 24. Changing the password for accessing the web interface of the router

Magazine

You may also need data from the log (log) of the router. To get this information, go to the section " Additional settings", paragraph " System log", tab " General magazine» (Figure 25).

Figure 25. System log (log) of the router

The RT-N15U router is designed for networking in offices and private homes. Thanks to the USB port, users can use the instrument as a UPnP, FTP or print server. Using this router, you can create multiple wireless networks. How to set up this device for productive work? Let's consider in more detail.

Users can evaluate all the features of the device

USB port;
IPTV - yes;
PPTP, PPPoE, L2TP, IPsec;
2.4 GHz;
1 Gbps;
2 built-in antennas;
The router is equipped with 4 LAN ports.

Interface

All settings of ASUS RT-N15U are performed through the interface menu. To enter it, we advise you to enter "192.168.1.1". The system will ask you to fill in the login / pass fields, for new equipment these data are always the same - enter admin / admin. If the device's IP has changed or the configuration has changed before, return to initial settings by holding down the reset key.

WiFi setup

In the "Wireless Network" section of the "Advanced Settings" section, you must enter the following data:

WPA encryption - AES or TKIP;
SSID - come up with a name for the new network;
WPA2-Personal;
mode - auto;
key - enter a catchy keyword.
after checking the correctness of the entered information, save the configuration by clicking on "Apply". Wi-Fi will work almost immediately.

Internet setup

To configure access to the ASUS RT-N15U router on World Wide Web, go to the WAN item in the advanced options. Depending on the provider, you need to select a specific type of connection and configure it to your needs.

PPPoE connection

MTU - 1472;
type - PPPoE;
user login/pass - enter the information entered in the contract;
check the box next to the "Obtain an IP address automatically" field.

It is better not to touch other fields. If you correctly fill in the lines above, the Internet will appear immediately.

L2TP connection

For this type, the router is configured in the same paragraph as for PPPoE. The parameters should be like this:

WAN, UPnP, NAT - Enabled;
type - L2TP;
VPN server - depends on the specific provider. The name of the server and the IP address are issued by the company that provides Internet services;
hostname - come up with any name;
login/pass - enter data from the contract;
set a flag in front of the fields, connect to DNS and get an IP address automatically.

After saving the configuration, you will have access to the network.

PPTP connection

ASUS RT-N15U, when receiving an IP-address in auto mode, can also be configured for PPTP, just enter these router parameters:

name and password - issued by the provider;
type - PPTR;
PPTP/L2TP(VPN) or Heart-Beat server. Here it is important to enter the name of the vpn server or the IP address specified in the contract;
NAT, UPnP, WAN - enable;
connect to DNS and IP address automatically ;
apply the changes.

If the local IP address is static, it is important to write down the specific subnet mask, gateway, IP address, and DNS server 2 and 1. Do not forget to disable the option to automatically connect to DNS and IP address.

How to restore settings

ASUS RT-N15U settings can be saved and restored. Just go to the Administration item in the advanced interface settings. There are three keys there: load/save/resume settings. Depending on the task, click on the desired key. Remember that when you select "Restore", the system will return the settings to the original, that is, the factory ones.

In order to get into the web interface of the router, you need to open your Internet browser and type 192. 168.1.1 in the address bar, Username - admin , Password - admin(provided that the router has factory settings and its IP has not changed).

Setting up Wi-Fi on the router

In the router interface, you need to go to the tab on the left Extra options Wireless network.

We set the parameters as follows:

Field SSID: Enter the name of the wireless network. The value in this field can not be changed.
Authentication method: WPA2-Personal
WPA Encryption: TKIP or AES
WPA preshared key: you must enter any set of numbers, from 8 to 63 in length. They also need to be remembered so that you can specify them when connecting to the network.
Click the button below Apply

Internet connection setup

In the router interface, select the tab on the left Extra options, in the list that opens, select WAN.

Setting up a PPPoE connection

WAN connection type: PPPoE
Obtain WAN IP address automatically: Yes
Username: Your contract login
Password: Your contract password
MTU: 1472
Save settings with the button Apply.

Setting up an L2TP connection

WAN connection type - L2TP
YES
automatically- put a dot on YES
Username and password- login and password from the contract
VPN server -
The rest of the parameters can be left unchanged. Enter something in English into the hostname. Save your settings.

Setting up PPTP (VPN) when automatically obtaining a local IP address

WAN connection type: PPTP
Enable WAN, Enable NAT, Enable UPnP - set everywhere YES
Get an IP address and connect to DNS automatically- put a dot on YES
Username: Your contract login
Password: Your contract password
enter the ip-address or the name of the vpn-server according to the contract
Save settings with the button Apply.

Setting up PPTP (VPN) with a static local IP address

WAN connection type: PPTP
Get an IP address and connect to DNS automatically- put a dot on Not
IP address: We drive in your IP address according to the contract
Subnet mask: We drive in a mask according to the contract
Main gate: We drive in the gateway under the contract
DNS server 1: and DNS server 2: enter the server of your provider (Rostelecom Omsk DNS 1: 195.162.32.5 DNS 2: 195.162.41.8)
Username: Your contract login
Password: Your contract password
Heart-Beat Server or PPTP/L2TP(VPN): enter the ip-address or the name of the vpn-server according to the contract
Save settings with the button Apply.

NAT when automatically obtaining an IP address (DHCP)

WAN connection type: Dynamic IP
Save settings with the button Apply

Checking the Internet Connection Status

Saving/restoring router settings

After making the settings, it is recommended to save them so that in case of problems, you can restore them. To do this, go to the tab Additional settings, menu Administration;, Restore/Save/Load settings tab.

To save the current settings of the router, press the button Save. The settings file will be saved to the specified location on the hard drive.
To restore settings from a file, you must click the button select a file, specify the path to the file with settings, then click the button send.

Attention! Button press Restore will restore the factory settings!

I think many will agree with me that the price tag for setting up a regular router in stores (and many private specialists) is prohibitively high. Moreover, in most cases, the entire setup comes down to the banal: ask your Internet provider for connection settings and enter them into the router (even a novice user can handle this).

Before paying someone money to set up a router, I suggest trying to set it up yourself ( By the way, with the same thoughts, I once set up my first router ...). As a test subject, I decided to take the ASUS RT-N12 router (by the way, setting up ASUS RT-N11P, RT-N12, RT-N15U routers is similar). Consider all the stages of connection in order.

1. Connecting the router to a computer and the Internet

All providers (at least those that came across to me ...) set up the Internet on a computer for free when connected. Most often connected via twisted pair» ( network cable), which is directly connected to the network card of the computer. Less commonly used is a modem, which also connects to the PC's network card.

Now you need to build a router into this circuit so that it is an intermediary between the provider's cable and the computer. The sequence of actions is as follows:

Disconnect the provider's cable from the computer's network card and connect it to the router (blue input, see screenshot below);
Next, connect the computer's network card (to which the provider's cable used to go) to the yellow output of the router (the network cable is usually included). In total, the router has 4 such LAN outputs, see the screenshot below.
Connect the router to the 220V network;
Next, turn on the router. If the LEDs on the device case start blinking, then everything is in order;
If the device is not new, you need to reset the settings. To do this, hold down the reset button for 15-20 seconds.

2. Entering the router settings

The first configuration of the router is carried out from a computer (or laptop) that is connected via a LAN cable to the router. Let's go through all the steps.

1) OS setup

Before trying to enter the router settings, you need to check the properties of the network connection. To do this, go to the panel Windows controls, then sequentially follow the path: Network and InternetNetwork and Sharing CenterChange adapter settings (relevant for Windows 7, 8).

You should see a window with available network connections. You need to go to the properties of the Ethernet connection (via a LAN cable. The fact is that, for example, many laptops have wifi adapter and a normal network card. Naturally, you will have several adapter icons, as in the screenshot below).

Then you need to go to the properties of the "Internet Protocol version 4" and put the sliders in front of the items: "Obtain an IP address automatically", "Obtain a DNS server address automatically" (see screenshot below).

By the way, pay attention to the fact that the icon should be bright and without red crosses. This indicates a connection to the router.

If you have a red cross on the connection, then you have not connected the device to the PC.

If the adapter icon is gray (not colored), then either the adapter is disabled (just right-click on it and turn it on), or there are no drivers for it in the system.

2) Enter settings

To enter directly into the settings ASUS router, open any browser and type in the address:

192.168.1.1

Password and login will be:

Actually, if you did everything correctly, you will be taken to the router settings (by the way, if the router is not new and has already been configured by someone before, it may have changed the password. You need to reset the settings (there is a RESET button on the back of the device) and then try log in again).

If you can not enter the router settings — /i>

3. Configuring the ASUS RT-N12 router for Internet access (using PPPOE as an example)

Open the "Internet - connection" page (I assume that some may have an English version of the firmware, then you need to look for something like Internet - main).

Here you need to set the basic settings necessary to connect to the Internet of your provider. By the way, you may need an agreement with the provider for connection (it just indicates the necessary information: the protocol by which you are connected, login and password for access, perhaps the MAC address for which the provider provides access is indicated).

WAN type - connections: choose PPPoE (or the one that you have in the contract. The most common is PPPoE. By the way, further settings depend on the choice of connection type);
Further (up to the username) you can not change anything and leave the same as in the screenshot below;
Username: enter your login to access the Internet (specified in the contract);
Password: also specified in the contract;
MAC Address: Some ISPs block unknown MAC addresses. If you have such a provider (or better just play it safe), then just clone the MAC address of the network card (through which the network was previously accessed). More on this: /li>

After making the settings, do not forget to save them and reboot the router. If everything was done correctly, the Internet should already be working for you, however, only on the PC that is connected to the router with a cable to one of the LAN ports.

4. WiFi setup

To various devices in the house (phone, laptop, netbook, tablet) could access the Internet, you still need to set up Wi-Fi. This is done quite simply: in the router settings, go to the "Wireless Network - General" tab.

SSID is the name of your network. This is what you will see when you look. available networks Wi-Fi, for example, when setting up a phone to access the network;
Hide SSID - I recommend not to hide;
WPA encryption - enable AES;
WPA key - here you set a password to access your network (if you do not set it, all neighbors will be able to use your Internet).