Installing the asus rt g32 router. How to get along with the ASUS RT-G32 router

In this step by step instructions we'll talk about how to set up wifi router Asus RT-G32. This wireless router is one of the most purchased in our country and this is quite easily explained - a high-quality router at a low price will always find its buyer. Well, now about how to set up the Asus RT-G32.

Preparing to configure and connect the router

Before starting the process asus settings RT-G32, I recommend checking the connection settings by local network on the computer from which you will configure it. To do this, go to:

• Control Panel - Network and Control Center public access- Change adapter settings (for Windows 8 and Windows 7)
• Control Panel - Network connections(for Windows XP)
• Right-click on the LAN connection icon and select "Properties" from the drop-down menu
• In the list of components used by this connection, select "Internet Protocol Version 4 TCP/IPv4" and click "Properties" again
• Make sure that in the protocol properties it is selected automatic receipt IP addresses and DNS servers. If this is not the case, then set the automatic receipt of parameters. (In the case when you use a connection with a static IP address, before changing the parameters, write down somewhere the data that was specified in the protocol properties, they will be needed when configuring the router).

On this preparation, you can finish. The next step is to connect the router to the computer. The connection scheme is very simple: connect the cable of your Internet provider to the WAN port on the Asus RT-G32, and connect one of the LAN ports to the corresponding port on the computer. Connect power to the router. The next item is directly setting up the Asus RT-G32.

An important point to pay attention to: after connecting the router, you should not start VPN or PPPoE connection on your computer - i.e. if earlier you launched the Beeline or Rostelecom icon to access the Internet, now you don’t need to do this - the Internet will “appear by itself” after we finish the setup. This is enough common mistake and a common reason for the question that "there is Internet on the computer, but the laptop connects via Wi-Fi but without access to the network." Be careful.

Setting up a connection on Asus RT-G32

The main point of setting up a router is to configure it for self-installation desired type connection (determined by your ISP). So, let's begin.

All actions for setting up a connection are performed on this page. In most cases, you just need to specify the "Type of connection", which can be obtained from the provider, the login and password to the Internet, as well as the address of the VPN server for connections such as PPTP and L2TP. After that, save the settings and after 10-30 seconds you will have access to the Internet.

Below is a list of connection types for popular Russian Internet providers:

• Beeline - L2TP, VPN server address: tp.internet.beeline.ru
• Rostelecom - PPPoE
• TTK - PPPoE
• Aist - PPTP, VPN server address: server.avtograd.ru
• Dom ru - PPPoE
• Interzet - Static IP (Static IP)
• Online - Dynamic IP (Dynamic IP)

If you have completed the setup asus connections RT-G32, and on separate tabs browser can already open Internet pages, then it's time to go to the settings wireless network.

Setting up a Wi-Fi hotspot on Asus RT-G32

You can now connect to the router via Wi-Fi. The only thing is that the name of the wireless network is faceless (Asus RT-G32) and no password is set for it. A password is required in order to restrict unauthorized users from accessing your wireless network: neighbors and even people sitting on a bench in the yard.

In order to customize wifi settings, on the router settings page in the menu on the left, select the "Wireless network" item and fill in all the required fields:

• The SSID is the name of the access point and is required so that you can identify your wifi network among all the others. We use Latin
• Authentication method: here the best option will indicate WPA2-Personal, this will ensure the security of your wireless network
• The WPA preshared key is the Wi-Fi password. The password must consist of at least 8 English letters and numbers.

Save your settings.

That's all, this completes the setup of the Asus RT-G32 router and you can use the Internet from a laptop, tablet, smartphone and others WiFi devices without wires. If you have any questions - write in the comments.

Step 1. Specify for yourself the parameters of your provider - Internet service provider, which will need to be entered on the router configuration page:

• On what Protocol your operator provides you with the Internet ( PPTP, L2TP, PPPoE - Static or Dynamic);
• Automatically or manually your PC is assigned an IP address and DNS;
• Is access available through Login and password;
• Is there a binding network card PC to the operator's server by physical address (MAC address).

Step 2 In the properties of the LAN connection, in the properties Internet Protocol Version 4 (TCP/IPv4), if you see numbers, they should be rewritten in a notepad, and then set automatic tuning IP addresses, masks, gateway and DNS from the provider:

• Start - Control Panel - Network Connections or Network and Sharing Center - Change adapter settings - Local Area Connection - click right click properties:

Step 3Physical adress can be found by right clicking on the icon:

• Local Area Connections - Status - Details - In the window, in the list, the third line is Physical Address

Let's start configuring the router (router)

Turn on the router, insert the cable from the operator into the connector INTERNET, we connect the cable (supplied, as a rule, in the kit) with the network cards of the router (LAN 1 connector) and the PC (Ethernet network card connector). The router should light up at least power diodes (PWR), active first port and WLAN ( AIR), although it happens that the latter is disabled in the router settings. Before setting up, we recommend that you full reset router, for a long time, for 10 seconds, hold the button in the hole behind reset.

Configuring the RT-G32 Wireless Router

Step 1. Launch on PC Internet Explorer(default, Internet Explorer , but can also be Mozilla Firefox, Google Chrome, Apple Safari or Opera). V address bar specify the IP address of the router, which, as a rule, is indicated on the bottom of the router: http://192.168.1.1

To enter the router configurator, use Username, usually, admin and Password – admin, but it is better to clarify the information on the bottom of the router or in the user manual.

Step 2 If your provider provides you Static IP address and 192.168.1.1 , which matches the IP address of the router, in this case, enter the router in the section " LAN» and change the IP address of the router to 192.168.100.1 , then press " Apply"and reboot the router:

Step 3 After changing the address, you can proceed to the basic configuration of the router. On the page under " WAN» from the list, select the protocol of your operator and specify the parameters of the IP address WAN:

As shown in Figure 6, you can change the network name default to whatever you like. Choose encryption to protect home network from connecting inquisitive neighbors :) WPA-PSK TKIP is a strong encryption that will keep us safe. It remains to come up with and enter a password in the field " WPA preshared key”, memorize it and write it down in a notebook.

Step 6 Click " Apply”, after applying the network settings, click“, then“ Exit»

At the end of the reboot, our router is ready for service.

WHEN SETTING UP THE WIRELESS NETWORK, PLEASE NOTE!

• We recommend changing the Wi-Fi signal broadcast channel from automatic selection for a particular one, for example 6 or 9 .
• To achieve the maximum speed of data exchange over the network, do not use encryption types

The RT-G32 router allows you to create up to four WiFi networks at the same time. As in other models of Asus routers, the connection is configured through a web interface that can be opened in any browser. A large number of variable parameters and wireless network speed up to 150 Mbps make Asus RT-G32 suitable not only for home but also for office use.

Entering the router settings

The standard IP address where you can access the Asus RT-G32 control panel through a browser is 192.168.1.1. For authorization, you will need to specify the username and password of the router. By default, this is admin/admin, but if someone has already configured the router before, they could change this data. In this case, it is recommended to clarify the new login and password with the person who set up the device.

Advice! If there is no way to find out the changed parameters account, use a factory reset. It is done by long pressing the "Reset" button on the back of the router.

The control panel's home page contains a menu, a quick network map, and access to quick changes to basic settings. With them you can:

1. Change SSID (WiFi name).
2. Limit the maximum WiFi speed.
3. Enable or disable the radio module.

Changing Internet settings on RT-G32

To configure the Internet, open the "WAN" tab in the left menu. At this stage, it is desirable to have access to information about your connection, which is provided by the provider. Depending on the technology used, this may include an IP address, subnet mask, DNS server addresses, and account login information.

Select the type of WAN connection from the first dropdown list. When using IPTV, mark the port to which the equipment is connected to ensure the operation of digital television. It is recommended to leave the "Enable UPnP" option unchanged (value "Yes"). It simplifies the addition of new network clients.

To automatically connect to domain name servers, select the "Yes" option in the corresponding item. Enter the IP of the primary and backup DNS servers below. Specify account information if the type of connection you are using requires it. The remaining settings of the Asus RT-G32 router for a specific provider can be specified on the website of the company providing Internet access.

Note! Addresses can be used as DNS servers Google services Public DNS or Yandex DNS.

Tutorial video: Some nuances of setting up Asus RT-G32

Advanced Router Options

You can configure WiFi on the Asus RT-G32 router in the "Wireless Network" tab. In the SSID field, enter the desired wireless network name. The network can be made hidden by checking the "Hide SSID" box. As an encryption method, the choice of the protocol "WPA2-Personal", type "AES" is optimal. WiFi password specified in the "WPA Preshared Key" line.

Back in 2009, sales of the Asus RT-G32 router started. Setting it up is a fairly simple operation, and a beginner can handle it. computer specialist. It is its order for different operators that will be given in this material.

router niche

By the standards of 2009, the router in question could be safely attributed to mid-range network solutions. Now the requirements have changed significantly, and only the most budget devices can be attributed to the Asus RT-G32 considered in this article. The setup, of course, is quite simple, and there are no problems with it. Key advantage of this budget router is its cost, which at the moment is 1000-1200 rubles. Taking into account the fact that this product has already been tested by time and managed to show itself mostly only on the good side, such a price is quite justified.

Specifications

Typical parameters of the technical plan as for a network solution entry level boasts the Asus RT-G32. WiFi setup in this case, the standard, and there is certainly nothing super complicated in it. Number of wired ports per this device 5, and they are all RJ-45. One of them of blue color and is labeled WAN. Max speed in this case, it can reach 100 Mbps. It is to him that the wire from the network traffic provider is connected. The other four are yellow and labeled LAN1 to LAN4. Local devices of this network are connected to it, which may include game consoles, TVs, computers, laptops and other equipment. As in the previous case, the highest transfer rate is 100 Mbps. One round jack is for connecting outdoor unit nutrition. Wireless part network is implemented using Wi-Fi standard. At the hardware level, it is implemented by a single antenna, and the transmission rate in this segment can reach 150 Mbps.

First stage of setup: connection

At the first stage, you need to fully connect the Asus RT-G32. The setting is the same for all providers. First you need to connect the power supply to the network alternating current and the corresponding socket on the router. Then we bring the cord from the provider and connect it to the port marked WAN. Finally, if necessary, connect all wired devices computer network to the router. Separately, it should be noted that the computer must be connected to any LAN port directly to the router using a twisted pair for configuration. And it can be like desktop computer as well as a laptop. After completing the configuration, this connection is not required, and it can be dismantled with the equipment turned off. In the future, it can be replaced with a more convenient and practical Wi-Fi.

Setting procedure for "Beeline"

To begin with, let's consider the setup procedure for the Beeline cable provider of the Asus RT-G32 router. Setting up "Beeline" requires setting the following parameters:

1. After turning on and finishing downloading such components computing system like a router and Personal Computer, on the latter we launch any browser that is available. In its address bar, we type the address of the device: 192.168.1.1. Press Enter after that.

2. Then you need to wait for the control panel to finish loading. In this case, the interface will have two active fields. One of them is “Login”, and the second is “Password”. The character set admin must be entered in each of the fields. After filling in both fields, click the “Login” button.

• “WAN connection” - “Dynamic IP”;
• if necessary, set the port to which the IPTV set-top box is connected;
• in the next field we indicate that the IP address is set automatically and is obtained from the provider;
• then we set automatic connection to DNS.

4. After that, we save the changes made by clicking the “Apply” button and wait for the network node to reboot.

5. After the router has finished loading, select the “Network Map” item. It is mandatory to set the following parameters in it:

• we set the name of the network at our discretion in Latin letters;
• sub-item Security level - in the drop-down list, select WPA-Personal;
• in the next drop-down Encryption window, set the value to TKIP+AES;
• then in the KEY field, set the password for connection at your discretion; it can consist of Latin letters and numbers - there must be at least 8 of them.

6. Click the “Apply” button again and wait for the device to restart.

7. After that Asus RT-G32 is properly configured. Beeline connection setup is completed.

Algorithm for MTS

The configuration algorithm for the MTS network router Asus RT-G32 is not so different. Setting up MTS, as in the case of Beeline, begins with entering the setup menu according to the previously described method. Then in the menu item called “ Additional settings” select the WAN subsection. It sets the following parameters:

1. Connection type - PPPoE.
2. Automatically obtain network address and DNS.
3. We set the username and password, which are specified in the contract with the cable provider.
4. If necessary, we also indicate the LAN port to which the IPTV set-top box is connected.

We save these parameters and wait for the completion of the reboot of the router. After that you need to configure wireless connection according to the same algorithm as in the case of Beeline.

Configuration for Rostelecom

In this case, the setup procedure is identical to that previously given for MTS. Moreover, this is based on the same PPPoE protocol for Asus RT-G32. Setting up Rostelecom requires the same steps. The only thing you need to remember is that the password and, of course, the login are entered from the contract.

Results

The mere fact that the network router considered within the framework of this material has been successfully sold for more than 5 years speaks volumes. For the world of electronic technology, this is a whole era. At the time of the start of sales, this decision belonged to the average level. Now Asus RT-G32 belongs to the budget segment. Setting is a very, very simple operation, which even a novice and poorly trained user can certainly handle. To do this, it is only enough to complete all the previously indicated steps for each operator in full.