Akado installation. What type of connection does akado have

Akado is a popular Internet provider, which is used by users in Moscow and the Moscow region. If you have become a subscriber of this provider, then all that remains for you is to set up the Internet correctly.

As a rule, the main part of setting up the Internet from Akado is carried out through the web interface of the router. Because even Akado's are spreading different models routers, not to mention the fact that you purchased a router yourself, then the interface in your case may be seriously different, but the setup principle will remain the same.

Step 1: Connecting the Router

First of all, you will need to properly connect the router. To do this is quite simple: first you need to provide power to the router. This can be done if you use the power supply included in the kit, connect it to the router and, accordingly, to the network.

After that, you will need to provide the router with Internet access. To do this, you need to connect an Internet cable to the router, which was brought by the Akado provider to your apartment. To do this, this cable will need to be inserted into a special socket on the back of the router, which, as a rule, is either highlighted in color or signed with the word “WAN” or “Internet”.

Since the router is configured from a computer, we will need to connect these two devices to each other. This can be done using the cable included with the modem. You should connect one end of the cable to one of the LAN connectors of the router (no matter which one), and connect the other, respectively, to the computer.

At this stage, connecting the router to the computer is completed, which means that we are calmly moving on to the process of setting up the router on the computer.

Step 2: Setting Up Your Router on Your Computer

Step 3: Setting Up Your Computer

Actually, on this the Internet setup for Akado can be considered complete. We draw your attention to the fact that if you have any difficulties, you should make a call to the provider's hotline, where a specialist will help you identify the cause of the Internet's inoperability and eliminate it in a short time.

How to connect a router to Akado?

Master's response:

There are two ways to connect a Wi-Fi router to Akado's Internet: using a DSL router or by connecting a LAN router to a DSL modem that is already installed. The second option deserves detailed attention.

You will need a network cable to work.

If the computer already has a configured DSL modem that serves as an Internet access for the computer, in this case the network cable must be disconnected from the device. Connect to the WAN port of the new Wi-Fi router. Using a second network cable, connect a desktop computer to the LAN connector of your router.

They launch the Internet browser and open the web interface of the Wi-Fi router settings. You must enter your username and password, after which you can access the settings. Open the WAN menu and select the DynamicIP function. In the "MAC-address" field, enter the physical address of the network card of the computer from which the router was configured. Then click the CloneMACAddress button. The DNS address fields must be 0.0.0.0.

By clicking the Apply button, you will save the entered settings. Entering the Wireless menu, activate the work wireless hotspot access. Set the type of security you need. After that, you will need to enter a password that will provide a connection to the wireless network. When working with the Akado network, you must disable the Firewall function, since it will only interfere. To do this, set the Disable parameter.

After saving all the settings of the router, you need to reboot. After that, entering the web interface of the network equipment, open the Status menu. The value of the MAC address field must match the physical address of the PC network card. If the IP-address field is set to 0.0.0.0, you must click the DHCP Release, DHCP Renew buttons. In the Russian version of the firmware, this may be "Update DHCP".

The wireless access point has already been created, now it remains to connect a laptop to it. Having opened the settings of the wireless network adapter, you must select the Internet protocol TCP / IP. Near the items "Get DNS address-server automatically" and "Obtain an IP address automatically" must be checked. The settings are saved.

One of the largest Moscow providers of home TV + Internet, combining fast online access and interactive TV is http://www.akado.ru (official website). The brand, which has absolutely nothing to do with the rock band of the same name, is also known as the company COMCOR (part of the RENOVA-MEDIA telecommunications holding), which has decades of experience in the telecommunications industry. And this theoretically means a stable and high-speed connection with the Global Network.

Install Wifi for users connected to the global network

• Tired of being tied down network cable to one workstation / computer?
• Are you connected to the Akado wired Internet, but need to share the network with several computers (laptops)?
• Have you bought an additional laptop, smartphone, game console and need to connect them together to an existing channel?

LOW SPEED?

If these speeds are not enough, then it is possible to install ultra-high-speed equipment of the 802 11 N standard, like D Link's DIR 655, which will provide performance wireless module about 30+ MB / Sec.

We will help you install wireless network with a home visit.

You will gain freedom of movement around the house and be able to work on the Internet simultaneously on several computers without interfering with each other; print on the printer over the network, play exciting network games.

FAVORABLE COST of the solution: from 2300 rubles, taking into account the cost of the router, next day delivery and setup for two PCs!

Below is a list of AKADO-compatible Wi-Fi routers that work reliably with the Internet, which we will promptly deliver to your home (office) and configure:

• D-Link 615 (802.11 n150) is the best in terms of price and quality; but not always configured from the 1st time; SUPERPRICE: 3100r with delivery and installation!!!
• Router Asus WL 520 GU (with a USB port for connecting a printer)
• DeLink DIR 300. Price 2300 rubles, including installation with configuration on 2 computers
• The device from Asus WL520GC is a little faster than Dir300, but Wi-Fi is only 54 G
• Trendnet TEW-634GRU 4 Gigabit Ethernet LAN ports + 300Mbit Wi-Fi + holds torrents
• Powerful Ziksel Kinetic router with two 5dbi antennas. Cost with installation 4000 rubles
• WL 500 GPV2 - more powerful and functional model, but with slow WIFI (54g)
• For a large house or apartment, we recommend DLink DIR-655 - fast Full 1 Gigabit (WAN + LAN) N300 Wi-Fi Router, cost 5300r

The World Wide Web operates using DocSiS technology (not to be confused with Adsl), which implies the asymmetry of the speed of the consumed traffic (to the user faster than from the user). The signal enters the apartment through a coaxial cable going to the modem, from which a standard 100 megabit Ethernet over twisted pair RJ-45.
Recently (following STREAM), the provider has been offering a full-fledged unlimited internet excluding traffic at any speed. If earlier there was an unofficial monthly limit on consumed traffic (for example, 25 gigabytes / month), upon reaching which the user's Internet connection speed was "cut off", now you can download information without any strain.

Which providers to connect to?

Is an alternative possible in the face of Stream / Mts or Corbina? The provider can be beneficial to people as a simplified and faster alternative to STREAM, since it is much easier to set up and does not require a phone number for its work, as well as entering a password every time you enter the network like CORBINA and STREAM.
Asynchronous communication: The incoming speed is higher than the outgoing speed. This aspect is important for users who intend to post any data on the network for download by other users (FTP, WWW servers, or peer-to-peer programs, Utorrent, E-Mule, KaaZaa and the like). True, there is one important nuance here, read on.

ADDRESSING

If you are going open access to your resources from the Internet, You can't do it. The fact is that, by default, all users access the Internet through a single address using NAT technology. In other words, when working on the home Internet from Akado, provider equipment gives you a single white protected the address. This means that all outgoing connections are allowed, but all incoming connections are denied. And in order to forward the port inside, (by configuring on the router " virtual server”), you need to directly configure the provider’s equipment.
There is only one way out of this situation: order for a fee real persistent routable ip address. Which reduces security, but increases the functionality of internetworking.

For users who host their own servers for external access, the highest outgoing speed is important (for the friendship of peoples, a reliable UPLOAD). Akado shows good performance in this area. For comparison, for the same STREAM, the upload performance at the maximum tariff does not exceed 750 kilobits. The leader in “upload” is definitely CORBINA, this provider has a 1:1 ratio of download to upload speeds.

WIFI SETUP

The simplicity of the settings is surprising: you need to enter static parameters IP, DNS servers and gateway to get started. To enjoy the unlimited possibilities of the Internet, you do not need to enter a login / password. In other words, the Akado provider does not have VPN authorization, but there is a binding to the hardware address. This is an absolute advantage over Corbina and STREAM. The absence of client VPN protocols increases convenience and stability when connecting two or more home computers through a router.
If you ever need to connect several PCs or laptops to the Internet using a router, it will be an order of magnitude easier than for CORBINA or STREAM, because any of the routers with an RJ-45 WAN interface is suitable for purchase. And if you can’t manage to set up a wireless router yourself, call! Network masters will come to the call home and configure the WI FI routers of Asus WL520 Gc / 520gu, model RT G32; qualitatively set up Dlink DIR300, or any other routers, for example Ziksel Kinetic, providing wireless Internet in the apartment of 2 + laptops or computers through a Wi-Fi router.

service quality

It is difficult for us to judge the quality of the service provided by this organization; for this, there are numerous reviews of existing customers on the Internet. But since the provider uses DocSiS technology (the corresponding modem, like the Cisco Epc2325, is installed at the client's home), then theoretically the stability of such a connection will be somewhat reduced compared to competing Moscow providers operating via Ethernet technology without the use of additional devices.

OVERVIEW OF PROVIDER TARIFF PLANS

The operator has three Internet tariffs for users with an initial speed of 2500 / 800 Kilobits and 28 interactive TV channels.
The most economical tariff will cost you 400 rubles / month.
The price of the most "expensive" tariff is only 600 rubles. For this price you will get 7500 kilobits of incoming traffic and 1 Mbit of upstream traffic.

corporate INTERNET connection of legal entities to AKADO provider

Starting May 15, 2008, the provider makes a gift to all owners of small and medium-sized businesses. Until June 30 inclusive, there is a special price for connecting an office to leased Internet lines, which is only 30 rubles. Hurry!

PLEASANT SURPRISES

Purely AKADovskaya lotion: virtual flash drive. How it works: the user is allocated one gigabyte of disk space on the provider's servers and a login with a password for full access to data. You can access the “flash drive” from any part of the world, where there is only access to the World Wide Web.

AKADO is a telecommunications operator providing Internet, digital television, radio and telephone services in the three largest Russian cities: Moscow, Yekaterinburg and St. Petersburg. Has enough positive feedback, as it works on modern equipment and provides services according to the most modern standards.

The operator works using state-of-the-art technology

Given that the underlying technology for connecting to world wide web- DOCSIS, many users have a lot of questions about how to set up and connect equipment. We propose to understand this in more detail.

What is DOCSIS technology

DOCSIS technology involves the provision of all telecommunications services over a television coaxial cable. That is, you can watch TV and use the Internet on one wire. This is very convenient as there is no need to run cables from multiple vendors. In terms of payment, everything is also much more convenient.

There are several technology standards. The most modern one is EuroDOCSIS 3.0. In most districts of Moscow, it is he who is utilized. Now maximum speed access is 150 Mbps. Prospects for the development of technology promise to reach speeds of up to 800 Mbps.

Configuring the router to work in the AKADO network

Wiring diagram

When connected to AKADO, you are brought to the room coaxial cable. It is no different from an ordinary television cable. A splitter is installed at the entrance to the apartment. Its task is to distribute the signal between various devices. Other devices are connected to it, such as a modem, tuner or radio. In our case, a router with support for DOCSIS technology will be connected. You don't have to worry about where to buy it, as the company, when connected, provides the opportunity to buy it or rent it. After that, you turn on the router and connect to its wireless network on any of your devices.

Router settings via web interface

1. Connect the AKADO coaxial cable to the corresponding socket of the router. Screw it on securely so that it is firmly fixed.
2. Connect your router to electrical network 220V, press the power button on the back of the device.

1. Behind the router, you will find information about the login and password of the wireless network (SSID - network name, password - password), as well as credentials for entering the settings interface (Login - access address, ID - login, PW - password).
2. Usually, configuration is performed by logging in at 192.168.0.1, login - admin, password - admin or password. Use any browser.

1. Since authorization occurs by the MAC address of the equipment, you will not need to enter any data. All you can change and configure is the network mode and security protocol. We recommend that you use the WPA2 standard and the AES encryption algorithm. They are the most reliable. You can find this item in the "Wireless Network Setting" section.

When you first connect, you will have to wait a few hours until the Internet appears. This is due to the fact that the MAC address of the router must be activated on the AKADO server.

Conclusion

As you can see, setting up the Internet from AKADO is quite simple. When you first connect, the wizard will set up all the equipment for you. You will need to do everything on your own if you have rearranged the room, and there is no desire to wait for the master for several days.

Do you use AKADO provider? We invite you to leave comments with feedback.

AKADO is a telecommunications service provider providing Internet service, digital television, radio and telephone in the three largest cities of Russia: Moscow, Yekaterinburg and St. Petersburg. It has enough positive reviews, as it works on modern equipment and provides services according to the most modern standards.

The operator works using state-of-the-art technology

Given that the main technology for connecting to the World Wide Web is DOCSIS, many users have a lot of questions about how to set up and connect equipment. We propose to understand this in more detail.

What is DOCSIS technology

DOCSIS technology involves the provision of all telecommunications services over a television coaxial cable. That is, you can watch TV and use the Internet on one wire. This is very convenient as there is no need to run cables from multiple vendors. In terms of payment, everything is also much more convenient.

There are several technology standards. The most modern one is EuroDOCSIS 3.0. In most districts of Moscow, it is he who is utilized. Now the maximum access speed is 150 Mbps. Prospects for the development of technology promise to reach speeds of up to 800 Mbps.

Configuring the router to work in the AKADO network

Wiring diagram

When connected to AKADO, a coaxial cable is led into your room. It is no different from the usual television cable. A splitter is installed at the entrance to the apartment. Its task is to distribute the signal between different devices. Other devices are connected to it, such as a modem, tuner or radio. In our case, a router with support for DOCSIS technology will be connected. You don't have to worry about where to buy it, as the company, when connected, provides the opportunity to buy it or rent it. After that, you turn on the router and connect to its wireless network on any of your devices.

Router settings via web interface

1. Connect the AKADO coaxial cable to the corresponding socket of the router. Screw it on securely so that it is firmly fixed.
2. Connect the router to a 220 V electrical network, press the power button on the back of the device.

1. Behind the router, you will find information about the login and password of the wireless network (SSID - network name, password - password), as well as credentials for entering the settings interface (Login - access address, ID - login, PW - password).
2. Usually, configuration is performed by logging in at 192.168.0.1, login - admin, password - admin or password. Use any browser.

1. Since authorization occurs by the MAC address of the equipment, you will not need to enter any data. All you can change and configure is the network mode and security protocol. We recommend that you use the WPA2 standard and the AES encryption algorithm. They are the most reliable. You can find this item in the "Wireless Network Setting" section.

When you first connect, you will have to wait a few hours until the Internet appears. This is due to the fact that the MAC address of the router must be activated on the AKADO server.

Conclusion

As you can see, setting up the Internet from AKADO is quite simple. When you first connect, the wizard will set up all the equipment for you. You will need to do everything on your own if you have rearranged the room, and there is no desire to wait for the master for several days.

Do you use AKADO provider? We invite you to leave comments with feedback.

Setting up the Akado router and OnLime is as simple as possible. To be more precise, there is nothing to configure at all - just connect the cable to the router and use the Internet. However, a beginner may still have a question about how to set up an Akado or OnLime router, so I did detailed instructions, which is universal for any model wifi router regardless of the manufacturer - TP-Link, D-Link, Asus, Zyxel Keenetic, Xiaomi, Tenda, Netis, Netgear or whatever. The difference can only be external design interface of the administrator section, as well as in the names and locations of the settings sections.

The guide is suitable for any providers, even if they are not on the list, that provide Internet using a dynamic IP address - Qwerty, Akado, 2KOM, Cactus, Onlime, MosNet, RiNet, StarLink and others.

Connecting Akado router and OnLime

In order to connect the router to the Internet from Akado, Online, Qwerty or 2KOM, you must first insert the provider's cable into the WAN port, and the Ethernet cable (patchcord) included in the kit - with one end into network card computer, others - to the LAN port on the router

On a computer (Windows 7), go to the section network settings along the chain:
Start > Control Panel > Network and Internet > Network and Control Center public access> Manage network connections > Change adapter settings.

click right click mouse on the item "Connection by local network and go to "Properties"

We go to the "Internet Protocol version 4" section and check the boxes for "Obtain an IP automatically" and "Obtain an address DNS servers automatically"

We save the settings.

Setting up a router for the Internet from OnLime and Akado

The next step is to connect the router to the Internet from OnLime and Akado. On the bottom cover of the router case we find the IP or WEB address to enter the admin panel, as well as the login and password

We open a browser on the computer and enter the specified IP address in the address bar, after which in the pop-up window - the login and password from the sticker.

We find in the menu of the router the item "WAN" or "Internet"

In the column "Type of WAN connection" select "Dynamic IP"

In the "MAC address" column, specify "Clone from computer" (if the provider has an IP binding)

If this is not possible, and the MAC address must be entered manually

then we return on the computer to the section " Network connections”, Double-click on “Local Area Connection” and go to “Properties”. Here we find the "Physical address" - this value must be written in the corresponding text field in the router.

Save the settings and reboot the router.

Setting up WiFi on a router for Akado and OnLime

The only thing left is to set up WiFi, through which the Internet from OnLime and Akado will be distributed. Open the "Wireless Network" section in the menu
We set our own values ​​for:

• SSID - the name of your wifi network, which will be displayed in the list for connection
• Network protection method -
• Encryption type - AES or TKIP
• Key - password for connecting to WiFi, at least 8 characters

Applying the settings. We open a laptop or smartphone with a WiFi module, turn it on.
Click on the wireless connection icon in the lower right corner of the panel Windows icons
We find the network with our name in the list and connect using just given password.

We enjoy the wireless Internet of Akado and Onlime - this is how easy and simple it is to connect the router, I'm sure you will be able to set it up too!

How to connect Akado Internet?

In order to connect the Internet access and / or television services from Akado, you need to fill out the above form with all the data or call us at work time by phone. After filling out an application for connection, a specialist will call you within a few hours and set a convenient time for you to visit a specialist who will carry out the necessary connection work.

How to set up Akado Internet?

In this case, a clear short answer to this question no. Internet setup depends on the following components: modem, router, connection type, desktop computer or laptop operating system and some other elements. There can be several dozen combinations of such elements, but the bottom line is that if you want to set up the equipment in a quality manner for stable operation, then seek help from specialists.

Should I rent or buy Akado equipment?

For us, the answer is obvious - to buy high-quality equipment. Why? In the vast majority of cases, the quality of equipment and its software, offered by Internet providers, as certified by them, leaves much to be desired and costs much higher than the fair market price. The design of some products of routers (routers) can be shocking in comparison with quality brands, such as the Thomson TCW770 router - a huge white brick.

Which router (router) to choose for Akado?

As noted above, it is worth buying a high-quality router once (ASUS, Zyxel, D-link) and using and enjoying their high-quality uninterrupted operation. If you choose a high-speed plan, then many cheap wireless routers will simply not give out the actual rate of the rate, but will cut it.

How to set up a router for Akado?

The essence of the settings for connecting to the Internet through Akado is quite simple and comes down to finding out the unique identifier of the network equipment, the so-called MAC address, which must be entered in the equipment settings on the subscriber's side and on the provider's side. To ensure the security of the wireless network, you need to encrypt the network using available methods.

Technical support for Akado subscribers?

If your internet is not working, you have purchased new router and do not know how to set it up, you have new computer, which needs to be connected, in short, you need Akado's technical support services, please contact us for help.

Services computer help Akado subscribers

In addition to setting up access to Akado's networks, we provide an almost exhaustive list of computer assistance services that can satisfy the most demanding client. You can find the entire list of computer assistance services on the pages of our website.

Why does Akado not work?

The main reasons why the Internet may not work for you: the router is broken, its settings are lost, the PC is infected with viruses, the drivers do not work correctly, the wifi adapter in PC, missing cash account and much more. Contact us for help. Our specialist will come to you within a couple of hours, find out why the Internet is not working and set it up for correct operation.

Service zone

Akado's networks cover almost 100% of the territory of Moscow and a number of cities in the Moscow region. In Moscow, almost every resident can use the services of this company.

Wiring diagram

Basic instructions for setting up AKADO

• Windows 8: auto settings , static settings , PPPoE , mac address
• Windows 7:

Akado is a popular Internet provider, which is used by users in Moscow and the Moscow region. If you have become a subscriber of this provider, then all that remains for you is to set up the Internet correctly.

As a rule, the main part of setting up the Internet from Akado is carried out through the web interface of the router. Since even Akado distributes different models of routers, not to mention the fact that you purchased a router yourself, the interface in your case may be seriously different, but the configuration principle will remain the same.

Step 1: Connecting the Router

First of all, you will need to properly connect the router. To do this is quite simple: first you need to provide power to the router. This can be done if you use the power supply included in the kit, connect it to the router and, accordingly, to the network.

After that, you will need to provide the router with Internet access. To do this, you need to connect an Internet cable to the router, which was brought by the Akado provider to your apartment. To do this, this cable will need to be inserted into a special socket with reverse side router, which, as a rule, is either highlighted in color or signed with the word "WAN" or "Internet".

Since the router is configured from a computer, we will need to connect these two devices to each other. This can be done using the cable included with the modem. You should connect one end of the cable to one of the LAN connectors of the router (no matter which one), and connect the other, respectively, to the computer.

At this stage, connecting the router to the computer is completed, which means that we are calmly moving on to the process of setting up the router on the computer.

Step 2: Setting Up Your Router on Your Computer

1. Make sure that your router is turned on (diodes should be lit on it), and then launch any browser on your computer and go to the following link in it:
2. As soon as you press the Enter key, an authorization window will appear on the screen, in which you will need to enter data to enter the web interface. While this data is standard, the word “admin” (without quotes) is entered in both the first and second fields. If this data did not fit, and you were unable to enter the router settings, then you will need to inspect the router case, where, as a rule, at the bottom, there should be a sticker with information about the router. This is where the authorization data for your modem (login and password) should be specified.
3. After logging into the web interface, first we need to configure the Internet on the modem. On the left side of the window, you will need to open the tab "Net", select a section in it "Connections". In the window that appears, click the button "Add".

   

4. A window will appear on the screen in which you will need to fill in the columns in accordance with the data provided by your provider.

   PPPoE setup

   • Connection type– PPPoE;
   • Username– data that must be taken from the contract concluded with Akado;
   • Password- the same. This data is taken from the contract with the provider;
   • Password confirmation- re-specify the security key;
   • MTU– 1492;
   • We press the button "Save" to accept changes.

   Configuring Dynamic IPoE

   • Connection type– IPOE;
   • MTU– 1400;
   • Enable RIP– clear the checkbox from this item;
   • Enable IGMP- put a checkbox;
   • NAT- put a checkbox;
   • Firewall- put a checkbox;
   • Click the button "Save".

   Setting L2TP

   • Connection type– set the “L2TP” parameter;
   • Physical interface– WAN;
   • Connect automatically- put a checkbox;
   • Service name- write "L2TP";
   • Username
   • Password– data provided by the provider;
   • Password confirmation– re-enter the security key;
   • keep alive- put a checkbox;
   • LCP interval – 30;
   • LCP dips – 5;
   • MTU– 1400;
   • Enable RIP- uncheck the checkbox;
   • Enable IGMP- uncheck the checkbox;
   • NAT- put a checkbox;
   • Firewall- put a checkbox;

     Apply the changes by clicking on the button "Save".

   

5. When the Internet settings are successful, you just have to execute on the router WiFi setup. You can do this by going to the section in the left area of ​​the window. "Network" - "Wi-Fi". Make sure you have the tab active at the top of the window "Basic settings" and then make the following changes:
   • Turn on wireless connection - put a checkbox;
   • SSID– set the desired name of the wireless network, which must be written in English;
   • The country- set the country of residence;
   • Maximum number of clients- This item is optional. It is optimal to set the value to 10;
   • Click the button "Change".

   

6. Click the tab at the top of the window "Security Settings", where, again, you'll need to do some tweaking:
   • Network Authentication– WPA-PSK/WPA2-PSK
   • PSK Encryption Key– enter a password that will protect your wireless network (at least 8 characters long);
   • WPA2 Pre-authentication- put a checkbox;
   • Click the button "Change".

   On this, in fact, the Internet setup on the router can be considered complete.

Step 3: Setting Up Your Computer

Actually, on this the Internet setup for Akado can be considered complete. Please note that if you experience any difficulties, you should call hotline provider, where a specialist will help you identify the cause of the inoperability of the Internet and eliminate it in a short time.