Is it possible to distribute wifi on a computer. Is it possible to set up a router without a computer? Set up a Tp-Link Wi-Fi router from a tablet or smartphone

For a very long time, I was going to write this instruction, but it didn’t work out. And now, finally, the long-awaited moment has come.

In this article, I will tell, and show everything in detail in the pictures, how to set up wifi router without a computer. Having only the router itself and the tablet. Well, or a smartphone. Moreover, it does not matter which operating system your tablet (smartphone) is working. It can be Android, iOS, or Windows phone. Can be configured from iPad or iPhone.

I was often asked in the comments whether it is possible to set up a router with only a phone or a tablet. What to do if there is no computer, laptop, netbook, etc. in the house. And it’s not difficult to imagine a case when you don’t have a computer, but on the other hand, there are many mobile devices that can connect to the Internet via Wi-Fi. And you decided to buy a router to distribute the Internet to your devices.

But, here a problem arises: “But how can I set up this router if I don’t have a laptop. And there is for example only a tablet. Where can I find instructions, and is it possible to do this at all? Yes, you can. Now I'll tell you. Of course, you can borrow a laptop, for example from friends, and set it up according to this instruction ““. But, this is not at all necessary.

What will we need?

We need the router itself, and some kind of mobile device that can connect to wireless network. From which we will carry out the configuration. Well, the Internet should be in your house, I think this is understandable.

I checked everything and everything works. The whole process, I will show on the example of the same router Tp-Link WR841N, and tablet ASUS MeMO Pad FHD 10 which works on Android. You may also have another device, such as a smartphone. Just on the tablet is much more convenient, due to the larger screen.

As for the router itself, it can be any, not necessarily Tp-Link. If you have, for example, Asus, D-Link, ZyXEL, etc., then only the control panel will differ. And so, in general, everything will be the same as in this manual.

Preparation: connect the router

First of all, I advise you to do full reset settings on your router. It doesn’t matter if it’s new from the store, or has already worked somewhere, the settings need to be cleared. Perhaps it has already been configured, and we do not need some old settings. Because of them, many problems can arise. Therefore, we look at the article ““, and do as it is written there. Made? Great, let's continue. If something didn’t work out, we continue in the same way, let’s hope that there are no settings we don’t need.

We fasten antennas to the router (if they are removable), then connect the power cable and plug it into a power outlet. We connect to the blue WAN connector network cable, the Internet. Which the provider brought to your house (It would be nice to be sure that the Internet is working and paid for. Otherwise, problems may arise during the setup process, and you will think that the router, or the setup method, is to blame for everything).

Connected, the indicators flashed, everything is fine. If, after turning on the network, the indicators on the router do not light up, then it is possible that it is turned off by a button, which may be on the case of the router itself. Check.

Now we pick up a tablet, smartphone, phone (what do you have), and proceed to the next paragraph of our instructions.

Let's start setting up the router from the tablet

By default, Wi-Fi security is not set and your network is open. Now we will connect the tablet to it (this is in my case, when I continue to write a tablet, I will have to enter the device from which we are setting up).

Go to network connection settings (we need to enable wifi).

Here, attention! It will have a standard name and will be open. It is important to choose our network. When in doubt, just unplug your router (Turn Wi-Fi off and on on the device itself), and see if the network goes down. If yes, then this is your network, select it.

A window will appear. Just press Connect.

If everything is fine, then the status “ Connected“, and an icon with network divisions will appear at the top.

Everything, our tablet is connected to our wireless network. You can start settings.

Configuring the router through a browser on a tablet

We need to launch any browser. It is definitely on your device. It could be Google Chrome, or some other standard.

In the browser, click on address bar and enter the IP address of our router. Usually this 192.168.1.1 , or 192.168.0.1 . You can view this address, and the default username/password, from the bottom of your router. They should be listed there.

So, we type this address in the browser, on the tablet, and press the button Go(open, etc.) .

A window will appear asking for a username and password. Enter the standard ones, usually admin and admin, and click To come in.

So we got into the settings of our new router. Half the work, already done.

Set parameters for connecting to the Internet

First of all, we need to configure the router to work with your ISP. So that he can connect to the Internet and distribute it via Wi-Fi. To do this, we need to know the parameters that your provider gave you. Need to know the technology it uses (Static IP, Dynamic IP, PPPoE, L2TP), and already depending on the technology, the required parameters. All this data, you can check with the provider's support. At the same time, check if the provider binds by MAC address.

Attention! If the provider binds to the MAC address, then you need to call your provider's support and ask to bind the Internet to the MAC address of the router. You can see the MAC address of the router at the bottom, on the sticker.

This is the most important point. If you make a mistake here, your devices will be .

These parameters must be set on the tab network – WAN. Against WAN Connection Type choose the required technology. And already based on a certain technology, we set all the necessary parameters: name, login, static IP, or DNS.

Then, when all the settings are specified and checked, press the button Save to save the settings.

Pay special attention to the settings that I wrote about above. As I said, they are the most important.

Setting WiFi networks

Opposite point Wireless Network Name, set the name of your Wi-Fi network (write only in English letters, numbers are allowed). This name will be displayed on all devices.

Against region, indicate the country where you live.

If a window appears, just click Ok.

Installing protection on a wireless network

We open the item Wireless – Wireless Security.

Choose WPA/WPA2-Personal(Recommended).

Opposite point PSK Password think up and write down a password. It will be used to connect to your Wi-Fi. Use English letters and numbers. Make the password at least 8 characters long. Stick to the case of letters, it matters.

Be sure to write down the password on a piece of paper and put it in a safe place so as not to forget. And then you have to reset all settings and configure again.

Changing the password for accessing the settings

We need to change the standard admin and admin, which are used to enter the router settings. So that no one but us can access the settings.

Go to the tab System Tools – Password.

Set the default username and password. And below, set your new data. I left the username as admin, here is the password, I came up with my own.

Make a note of this password too so you don't forget it.

After pressing the button Save, a window will appear again asking for a username and password. You need to enter new information (which you mentioned above), and click on the button To come in.

We will again get into the control panel.

The setup is almost finished. It remains only to reboot our router.

To do this, go to the menu item System Tools – Reboot, and click on the “ Reboot“.

There will be a reboot status.

After the reboot process is over, the tablet will most likely show an error that it is impossible to open the address 192.168.1.1… This is normal. It's just that our tablet will disconnect from the router, but it will not be able to connect automatically (later on, it will connect automatically). Since we installed protection on the network, and after a reboot, it has already worked.

It is necessary to reconnect the tablet to our network by entering the password. To be able to use the Internet.

To do this, open the panel again quick access to the settings, and click on the network settings icon.

It may occur, for example, or. About this, I also wrote.

Afterword

A huge article turned out, a lot of screenshots, but in a different way - nothing. I tried to make the article as clear and simple as possible.

As you can see, you can configure the router without a computer, but simply with mobile phone, or tablet. I think that even from the TV you can set it up. And there is nothing difficult in this. The main thing is to follow the instructions, and check the settings that you specify, so that later there would be no different problems.

If you have any questions, comments, or wishes, I will be happy to hear them in the comments!

Despite the fact that now the simplest wireless router can be bought for only about 1000 rubles, still not everyone can afford it yet. Some people just don't want to spend money on it. But there are emergency cases when you urgently need to organize a Wi-Fi network, but there is no router or access point for it. For example, you bought a modern Smart TV TV and want to use it to watch videos on YouTube. How to be? The solution is simple - we will use improvised means to distribute WiFi without a router. I will give several working examples, and you will decide which one will be more convenient for you.

How to distribute the Internet from a laptop on Windows 10

In modern operating systems from Microsoft, which are installed on most computers in Russia, it is possible to organize a virtual access point and make a router out of a laptop. The only limitation is that this computer must be connected to the Internet either through a wired Ethernet adapter or through a 3G / 4G modem. The fact is that using one adapter, the laptop will not be able to distribute the Internet via Wi-Fi and receive it. The second limitation is now almost gone. The fact is that wireless adapter or its driver must also support such a function. On the modern computers Support issues are very rare.

So, in order to use your laptop as a router and distribute the Internet in Windows 10, you need to enable the Wi-Fi adapter on it, as well as make sure that it works and there are no problems with installed driver. After that, there are two ways - to activate the function manually or use the program. Consider both options.

Method 1: netsh wlan hostednetwork commands and ICS sharing

In order to independently configure the Windows virtual router and enable public access to it using the built-in ICS mechanism, we do the following.
Click right click click on the "Start" button in the lower left corner of the screen. The following menu will appear:

We select the item "Command line" in it or, if you are not working with Administrator rights, then the item "Command line (administrator)". A black window will appear in which you need to enter commands - the so-called "Windows console". The first command is to configure the wireless network settings, which we will run. Here is an example:

netsh wlan set hostednetwork mode="allow" ssid="moi-wifi" key="wifipassword" keyUsage=persistent

This is what it looks like on the command line:

Let's take a closer look. Parameter SSID is the name of the Wi-Fi network that you are creating and will be distributing. Parameter key is the security key or, in other words, the password to connect to this WiFi. The parameters entered with this command are stored in the registry and will retain the entered values ​​until you change them to different ones.

The second command is:

netsh wlan start hostednetwork

It starts the wireless network configured above.

In fact, this is how you force the computer's wireless adapter to distribute WiFi without a router, that is, on your own. Unfortunately, so far you have only been able to make an access point from a laptop that cannot distribute the Internet.

In order to now distribute the Internet on Windows 10, you need to make one more setting. Press the key combination Win + R and enter the open command in the line ncpa.cpl. Press the Enter button on the keyboard and the network connections window that is in the operating system will open.

Please note that you must have two wireless connections while network adapter one. This is fine! The second - in my example it is "Connection by local network* 2" is the Wi-Fi that the computer distributes. But now we don’t need it, but the connection through which your PC accesses the Internet. For me, this is the Local Area Network. Right-click on this icon:

Note: If you are using a PPPoE connection to your ISP, then you need to select High Speed ​​Connection. If you are connected via L2TP or PPTP tunnel, then you need to select a VPN connection.

In the window that appears, open the "Access" tab:

Check the box "Allow other network users to connect to the Internet" this computer". After that, the list below "Connect to home network". Here in it you need to select the created wireless network, about which I already said above. That's it, click OK to apply the settings.

Well, in principle, that's all, now the laptop distributes the Internet via WiFi and without a router, independently performing their functions.

Advice:
Each time you turn on the computer to start a virtual access point, you will have to enter this command:

To automate this process a little, you can create a text file on your desktop with the following content:

After that, save the file and rename it to change the extension from *.txt to *.bat. This will make the file executable. Now it needs to be placed in Startup. This will force the laptop to distribute WiFi automatically as soon as Windows 10 boots up.

On the previous versions OS - Windows 7 and Windows 8 everything is done in exactly the same way as on Windows 10. Here is a video instruction:

Possible problems: If you get the error "Failed to start the hosted network. The group or resources are not in the desired condition to perform the required operation" - then first check whether the Wi-Fi adapter is turned on on the laptop. If it is definitely turned on, then run the following command:

netsh wlan set hostednetwork mode=disallow

After that, try to start the virtual router again. Everything must work!

Method 2. Programs for distributing the Internet from a laptop via WiFi

This is an easier way to distribute Wi-Fi, which does not require any "extra steps" at all. As a rule, it is enough just to start the application. In some cases, he needs to manually specify through which network adapter the laptop accesses the Internet. The most popular program for WiFi distribution is, of course, a tool Connectify hotspot :

In my opinion, despite the popularity, this is not the most the best way. There are analogues that are simpler, more convenient and, most importantly, provide absolutely free of charge the same functions as Connectify Pro.

One such example is the program mHotspot:

This is great free program for distribution of the Internet on a wireless network. There are only a few fields in the main application window. "Hotspot Name" is the name of the WiFi network or the so-called SSID. The "Password" field is the password for Wi-Fi. In the "Share From" list, you must manually specify network connection through which the PC accesses the Internet. We do not touch anything else and press the "Start" button. Well, enjoy the delights of wireless Internet!

In general, as I noted above, there is a sea of ​​\u200b\u200bsuch software, but personally I liked the Chinese utility the most of them Ostoto Hotspot. It is distributed freely, there is no built-in advertising yet, it works and is not buggy! What else is needed for happiness?!

This free program for distributing Wi-Fi from a laptop has the very minimum settings and works right out of the box. Even a schoolboy will understand. To change the SSID or password for a connection, simply click on the "Edit" icon and enter your parameters in the fields that appear. Don't forget to save your changes by clicking the "Save" button.

How to distribute the Internet from a phone or tablet

Many users, for various reasons, prefer mobile Internet access to cable, because it is always at hand - not only at home, but wherever you are. The main thing is to have a confident reception cellular communication. But again, if you need to connect another device, difficulties immediately arise. Fortunately, operating system developers Android systems and iOS for mobile devices have built in the ability to organize a Wi-Fi router through a phone or tablet. Let's look at how this is done in more detail.

How to set up a hotspot on Android

Click on the gear icon and open the Smartphone Settings in this way:

In the "Wireless networks" section, find the "More" button and click it. In the next menu we find the item "Modem mode":

And then you need to select the item "Point WiFi access". This menu will appear:

Here you need to move the slider to the "On" position.
By doing this, you have already launched a virtual router that allows you to distribute Wi-Fi on Android.
To see - what is the password for connecting to this wireless network or change it - click on the line "Access point settings":

If necessary, you can change the SSID, the type of encryption standard used, and the security key here.
In order to disable the virtual router - just move the switch to the "Off" position.

How to share internet from iPhone

Fortunately, not only Android has this feature, Apple's iOS also allows you to turn on the hotspot on your iPhone and iPad with a few finger swipes. This is done in the following way. Open the settings of your iPhone and find the item "Cellular":

Scroll down to the item "Modem mode" and select it:

The following menu will appear:

Here you need to turn on the modem mode with the slider, after which your iPhone will start distributing the connected 3G / 4G Internet via Wi-Fi. The password for connecting to this wireless network can be viewed and even changed in the "WiFi Password" field.
To turn off wireless hotspot access on iPhone and iPad - just turn off tethering mode.

Everyone knows the standard way to connect to the Web - using a router that distributes WiFi to other devices. But there are situations when you need to configure a PC or laptop as an access point. How to do it right? Below we will consider the best methods on how to distribute Wi-Fi from a computer, which paths are most in demand, and what are the features of the process for different operating systems - Windows 7, 8 and 10.

How to distribute WiFi from a computer or laptop without a router

Experts identify several ways to distribute Wi-Fi from a computer to a phone or other device without using it. The most popular - through the console ( command line), via Windows interface 7, 8 and 10, as well as using special applications. For convenience, we will consider each of the methods separately.

How to distribute Wi-Fi through the command line

Answering the question of how to distribute Wi-Fi from a computer with Windows 7, 8 and 10, experts recommend using the command line. At the same time, the approaches for different operating systems are identical. The only difference is that on the "seven" it will not be possible to copy the command and you will have to enter it yourself.

Action algorithm:

• Call the command line using the Win + R combination or through the start menu.
• Drive in a line netsh wlan set hostednetwork mode=allow.

• Write the following command - wlan set hostednetwork mode=allow ssid="WiFi name" key="network password" keyusage=persistent.

• Press enter data.

These actions are enough to start Wi-Fi. To distribute WiFi from a computer with Windows 7, 8 or 10, you need to take the following steps:

• press Win + r;
• type in a phrase netsh wlan start hostednetwork to activate the newly formed network;

• make sure the devices of interest can see the profile.

It remains to distribute Wi-Fi from the computer. To do this, you must allow users to receive data packets. This is done in the following way:

• Go to Network and Access Center.

• Enter change adapter settings.

• Find your LAN connection.
• Right click on your profile and go to properties.

• Enter the "Access" section and allow other users to connect to the Network.

As you can see, setting up WiFi distribution from a computer with Windows 7, 8 or 10 is a matter of a few minutes. In the future, to control the connected devices, you can use the above "order" netsh wlan start hostednetwork. To speed up the input of programs, it is worth saving them text file.

As noted, the copying method is not suitable for the "seven", where you will have to enter data manually.

How to share Wi-Fi using applications

Another way to distribute Wi-Fi from a computer to Windows 10 to a phone without a router is to use special applications. By the way, this method is also suitable for other operating systems - “sevens” and “eights”. The advantage of this method is that there is no need to launch the command line and enter any commands. The whole process is simplified as much as possible.

There are a lot of such programs and applications on the net. Let's consider the best of them.

MyPublicWifi

MyPublicWifi is an application for a computer to distribute WiFi, allowing the device to function as an access point or repeater. After installation, you must run the program as an administrator. After starting, the software determines the current IP and offers to activate the connection to the Network. After pressing special button the network is launched and it becomes possible to distribute Wi-Fi with Windows computer 7 on the phone.

The program also works for other operating systems. After the first installation of the settings, they are saved in the program and remain unchanged after the secondary settings. The program allows you to distribute Wi-Fi to 32 devices from a computer or laptop.

Connectify hotspot

Connectify Hotspot is a handy software that allows you to start distributing the Internet via WiFi from a computer (PC) on Windows 10, 8 or 7. First you need to open the software, define the connection and come up with a security code.

The program has two versions (free and paid). For common tasks free option enough.

Virtual Router

The program is compatible with all Windows versions- from XP to 10. The first step is to write down the basic characteristics for connection - the name of the connection and the password. Separately, we note that to install the program, you will need NET Framework 3.5. The advantages of the software are the ability to distribute Wi-Fi from any computer, stability of access, ease of connection, Russian interface. An additional plus is the use of WPA2 technology, which provides data protection.

For a better understanding, let's look at an example of how to distribute Wi-Fi using Virtual Router. Action algorithm:

1. update the network video card drivers;
2. temporarily turn off viruses and firewalls;
3. run the program and turn on the router mode.

Knowing how to distribute Wi-Fi from a computer using one of the programs, you can quickly set up an internal network and connect to the Internet with different devices.

How to distribute Wi-Fi using the interface settings

To enable distribution, you can use the built-in interface of operating systems, but there are differences for each OS. Consider how to make a computer distribute Wi-Fi for each of the operating systems:

Windows 7

• If "seven" is installed on the PC, to turn the computer into a router, click on the connection and go to Network Control Center.

• Find the section for creating a new connection;

• and then go to the wireless network settings item according to the “computer-computer” scheme.

• Next, set the encryption type to WPA2 and check the box to save passwords. At the end, activate sharing so that you can distribute Wi-Fi from your computer to secondary devices.

Windows 8

In the case of the "eight", click on the WiFi network connection icon at the bottom with the right mouse button and go to the network control center.

As in the case discussed above, go to the section for changing adapter settings, right-click on your connection and select the "Properties" section. In the window that appears, enter the "Access" section and allow other users to use the connection.

Windows 10

Now let's look at how to distribute Wi-Fi from a computer (PC) Windows 10. Here the situation is simpler. Go to Start, Settings, and then Network and Internet.

Now go to the Mobile hotspot section, change the password and network name (click on the "Change" button).

Move the toggle switch to the right side and select the connection of interest. Here, select the connection - via cable, 3G or 4G, or using a modem.

When asked whether it is possible to distribute Wi-Fi from a PC (computer) with Windows 7 to a phone (or from another OS), experts give a positive answer. If you suddenly failed to connect with any device, you can try another device. Make sure you enter the correct password. Check again that the Internet is working on the PC and public access is open. As a last resort, restart the PC and start the access point again with the "order" netsh wlan start hostednetwork.

How to distribute Wi-Fi via cable

If you need to connect to a PC that does not have , you can use an Ethernet cable. After connecting the computers, open the control panel on the distribution PC, enter the network and control center and go to the section for changing adapter settings.

Select the connections you are interested in, select them, right-click and go to the bridge settings section.

It may take several minutes to connect.

How to distribute Wi-Fi from a computer through a router

Users on the Web are often interested in whether it is possible to distribute the Internet via Wi-Fi from a computer to a phone using a router. This is subject to device compatibility. The setup approaches for Windows 7, 8 and 10 are almost identical, so let's look at the general connection scheme.

Why is this needed? For example, you have a 3G modem. It can only connect to one PC or laptop. This approach is unfair. You need to make sure that all devices in the house can connect to this network. The dilemma is how to distribute Wi-Fi from a computer to a phone from a Windows 7, 8 and 10 router via a modem.

First, figure out the compatibility of the router and modem. For example, almost all Asus models allow you to distribute the Internet to other devices. In the case of TP-Link, you can use TL-MR3420 or TL-MR3220. There are no difficulties in the case of ZyXEL routers- Keenetic DSL, Keenetic Omni II, Keenetic Viva. To get compatibility information, you need to look into the settings and find the Wan Port - USB 3G, 4G section.

For example, consider how to distribute Wi-Fi from a Windows 7 computer with a Huawei EC 306 and an Asus RT-N18U router.

The algorithm is the following:

• Take out the router and connect it to the network. Insert a 3G modem into the USB port. There is no fundamental difference in which of the sockets to connect the device.

• Set the USB modem settings. Specify the country (location), register the Internet provider. The main settings are specified automatically, so you do not need to change anything. In point USB adapter you can write the name of your modem.
• Set the password for the Wi-Fi network you want to share and set the name.
  • next to this section, set the toggle switch to the OFF position;
  • click on the apply settings button and wait for the reboot.

  If the router suddenly does not see the modem, you must:

  1. make sure that the USB device and the router are compatible (if it is not there, you will not be able to distribute Wi-Fi from a computer to a phone via a modem);
  2. check provider settings;
  3. update router settings to latest version;
  4. check that the Internet is paid;
  5. make sure the modem has found a signal and connected to the network.

  Now you know how to distribute Wi-Fi from a computer with and without a router. It remains to choose the appropriate option and put it into practice.

Suppose you have connected the Internet on your computer and want to provide access to it from other devices. However, there is no way to connect a router. Windows 10 laptops have the ability to distribute the Internet through the built-in wifi module. Desktop PCs can also be used for WiFi sharing the Internet. Let's figure out how it's done.

How to share Wi-Fi from a desktop computer in Windows 10

Click " Start”, enter “ cmd", hover the mouse over the program" cmd.exe", right-click and select " Run as Administrator».

Before us opens the command line interface. We enter into it:

Netsh wlan set hostednetwork mode=allow ssid="namenet" key="password" keyUsage=persistent

namenet – your network name(Latin);

password – password(min. 8 characters);

A notification should appear in the command line that the SSID has been successfully changed and a new password has been set.

Then we enter:

netsh wlan start hostednetwork

If the text “Hosted network is running” appears on the command line, then everything is fine.

Wifi is already distributed, but it's still not possible to go online. To implement this feature, you should click "Start" => "Network and Control Center public access"Then click => "Change adapter settings".

Setting up Internet distribution via Wi-Fi

You need to find exactly the icon that matches your device. Moreover, it can be called whatever you like, and “Ethernet”, and “Connection No. X” and “Phone model”.

When desired label found - press RMB => " Properties» => « Access”, we find, “ Allow other network users to use this computer's Internet connection' and check the box. In the drop-down list, select the device through which the signal is planned to be distributed, and click " OK».

Please note that after the reboot you will have to turn on the network manually. In order not to waste time on this, you can create .txt file, enter the above command from point 3 into it, and rename it to .bat file.

And .bat is the file extension, not its name.

In order not to run our .bat file every time, click Win+R, enter shell:startup, and copy .bat to the folder that opens - now the network will start automatically.

Wi-Fi adapter setup

Before you start distributing the Internet, you should connect and configure the device for transmission wifi signal. It can be a wireless router, a portable Wi-Fi “USB dongle”, or even a smartphone or tablet connected to a PC.

You do not need to configure the "adapter" - just download the corresponding driver models and configure Windows.

Setting up a Wi-Fi router

If you plan to distribute the Internet through a router, you must first configure it. To set the desired parameters, you need to open a browser and enter . If the page does not open, reset the router settings by pressing the RESET key on it.

Sometimes this key is "hidden" in the case. To press it, find a small hole on the router and carefully insert a thin but strong object into it until it stops, for example, a hairpin or a needle.

When you rest - slightly press. If, after the manipulations, the setup page began to open, but the admin / admin login and password did not fit, take a closer look at the stickers on the router, usually factory authorization data are written on them.

Setting up your phone or tablet

Smartphones and tablets, of course, also need pre-configuration. First, you should install all the necessary software to work with the gadget and make sure that the computer and the device can see each other.

To be sure that everything works, try using a PC to access the network through your device - disconnecting the Internet cable. If it worked out, all that remains is to transfer your device to the “modem” / “access point” mode.

When presets completed - you should configure the Windows settings.

Many of us now have at home not only a TV and a computer, but also a phone, a tablet, etc. And there is only one Internet connection.

How to make it so that you can access the Internet from all the devices that we have at home ???

You answer that thanks to the router that distributes WI-FI. Then this post is for you.

But is it possible to make a computer or laptop distribute wi-fi wifiinternet without a router,is this possible? Certainly!!!

If you ask this question in the store, they will answer you that this is not possible, you need to buy a router. But oddly enough, this is just a pure divorce, because the goal of managers is to sell you something that you don’t really need.

My operating system is Windows 7. I also tried this method on Windows 8. So distributing wi-fi windows 8 is not a problem!I have not tried this method on other operating systems.If you connect, dear friends, using the proposed method, in another operating system, please unsubscribe in the comments, please, for the benefit of others.

It is probably worth adding that in order to distribute the Internet via Wi-Fi from this access point, the computer must be equipped with WiFi adapter. Either USB or PCI. In laptops, this is often a built-in device. But in stationary computers this is often not the case. So thatdistributing wi-fi through a laptop from this access point will not be difficult.

So if your computer is equipped with all this, then let's get down to business to distribute wi-fi from the computer.

First, let's briefly discuss what needs to be done to distribute Wi-Fi from a PC:

1. You need to create a virtual WI-FI hotspot, then existing internet transfer the connection to this access point, so you need free download wifi.

You do not need to think about how to do it, a very small, free program that distributes Wi-Fi will create an access point for you and will be responsible for it.- Mhotspot.
This program does not require installation. Here link to download this wonderful software. OR - download the program distributing wi-fi from the official site.

5.MaxClients- here indicate the number of clients that can connect to your connection point, you can connect up to 10 devices at a time. If you specify 1, then no other device you can connect to this point, except for the connected one.

6. Now we only have click "Start Hotspot" and create an access point.

We configure the distribution of the Internet through an existing Internet connection.
First go to:start - control panel - network and internet - network and sharing center - change adapter settings.

There you find "Wireless network connection 2.

You can rename it to the desired name, for your convenience, so as not to get confused with further settings, for example, I renamed it to " Virtual WiFi. But this is not necessary, you can leaveWireless network connection 2.As your heart desires.

Find your active connection. For me it is implemented through usb 3g modem, you can have any other, for example, in most cases this LAN connection.

8. Now, come in to your properties active connections, go to the "Access" tab. And then check the boxes everywhere, it's shown on the image .

9. Restart your computer and after your WiFi hotspot will be ready and start working.Now you can always use this access point. When you connect devices to the Internet, simply find this point in them and enter the password you specified earlier when creating a point in the Mhotspot program.

10. If you restarted your laptop (computer), then to enable Internet distribution via WiFi, you only need run the "Mhotspot" program and click "Start H otspot » . You don't need to enter anything else, because the program automatically remembers all the point name and access password you entered earlier.

So, you have learned that you can easilydownload wi-fi to a computer, completely free of charge and distribute wi-fi from a pc and laptop.

If suddenly you are unable to connect the distribution of the Internet using this method. Maybe you need to connect the distribution of the Internet via wi-fi in Windows XP? Try the following effective method. It is even more simple. You do not need to perform many manipulations, because this program will do almost everything for you! To connect wi-fi by another, similar methodAfter, please do not forget to write in the comments which method you liked best and came up with, what difficulties you had to face and how you resolved them.
By writing this, you yourself, without realizing it, can help many others!

Good luck to you friends in free swimming with wi-fi wifiover the Internet without any router!Save your money, they will be useful to you in a more important matter!

To whom this article was useful, please unsubscribe in the comments and share these unique tips on how to distribute wifi from a computer,with others. Press social buttons on the left of the screen and your friends in social network, will soon read these tips, saving time and money for themselves! Thanks!