Router zyxel login password by default. Manual for setting up a Zyxel Keenetic Lite router

After buying a router, first of all, you need to worry about reliable protection. This will help to avoid not only unauthorized access to your personal traffic, but also violation of privacy rights. Replacement will not take much time, but will provide reliable protection.

Why a password?

A combination of letters and numbers helps restrict access to the router. The procedure is necessary to preserve traffic and confidentiality. This is especially true for devices with built-in Wi-Fi.

If the user notices a decrease in speed, this may be a sign of an outside connection to your network. Flashing light bulbs without using traffic indicates that someone else has misused the equipment.

Photo: password generator for security

Wi-Fi without proper encryption can become a direct channel for accessing information on your computer. An experienced hacker will easily take advantage of this loophole and steal the data he needs or learn secrets that are important to you. To prevent this from happening, you need to take certain protective measures.

Any connected user goes online under your IP address. When he commits any illegal actions, law enforcement officers will have claims against the owner of the device.

A reliable combination will save you from such problems.

Login to settings

In order to enter the settings, we will use the web interface. To do this, you need to write in the browser line: 192.168.1.1. The factory combination is -1234, the name is admin.

If nothing happens with the entered data or an authorization error appears, you need to turn the router over and find the Reset button on the back panel. Press and hold for 10 seconds. After that, all settings will be returned to the base values.

After logging in, system information about the device will appear on the screen. There will be tabs on the right. With their help, the operation of the router is controlled, and the necessary parameters are entered.

In addition to changing the password, you can additionally perform the following actions in the menu:

To exit the settings, just close the web page. After making changes, you must click the "Apply" button and they will take effect.

How to change the password on a Zyxel Keenetic router?

In the web interface, you need to find the "System" tab and enter a new combination in the appropriate box. Duplicate the same numbers in the field below. Save the data with the Apply button. The changes made will allow you to use the internet center on your own.

What to do if you forgot your password?

The easiest way is to use the Reset button and restore the factory settings.

If there is no key, or it does not work, there is another way, consisting of the following steps:

1. connect the device to the computer via the COM port;
2. turn on terminal program(data bits - 8, speed - 9600 bps, stop bits - 1, honesty - negative, flow control - negative);
3. connect the device;
4. enter Debug mode (there will be a corresponding message);
5. type the command ATSH;
6. download firmware for Zyxel Keenetic on the site;
7. unzip the archive and find the rom file, enter the ATLC command to start recording.

Video: Connecting and configuring a ZyXel router

Changing the Wi-Fi password

To regulate access to WiFi hotspot select the "Security" tab.

In the tab, when changing the cipher, you must set the following parameters:

• authentication type: WPA-PSK/WPA2-PSK;
• network key format: ASCII;
• protection type: TKIP/AES.

In order not to make a mistake when typing numbers, it is better to check the box next to the inscription "Show network key". The minimum code length is 8 digits, the maximum is 63.

Do not make the combination too complicated. Remember, every time you log in, you will need to type it.

The manufacturer recommends using serial number devices as a combination. This is a reliable protection against unauthorized connection from the outside. If strangers live in the house, come up with your own cipher and do not save it when connecting.

Changing the password in the Zyxel Keenetic router does not take much time. The procedure itself is simple and straightforward. You can change the access settings for both the router and WiFi connection. The web interface has many other useful tabs to help you manage your device.

Keenetic Lite 3 is one of the updated line of routers from Zyxel. All of its products received a hardware update, as well as a new firmware version. That is why the setting this router somewhat different from its predecessors. In the following, we will take a closer look at each stage of this process.

Kit and appearance

Owners of earlier models will immediately identify a number of external differences that Keenetic Lite received. This is still the same black and compact router, but its antennas are no longer located at the back of the device, but on the sides, which makes it easier to mount on the wall.

The bottom is made glossy, the side panels are matte, and the signature wave-like pattern is located on top. The rear panel now houses a hardware mode switch. The operation indicators are located on the front of the router and glow green when active. They don't blink as often, so they don't draw attention to themselves.

The router kit includes:

• the device itself;
• power unit;
• network patch cord;
• detailed instructions;
• warranty card;
• advertising brochure with other products of the company.

Connecting a router

Let's get connected:

The router is ready for further work. If you want, you can clarify what they are and what types they are, as well as what equipment they are used to connect.

entrance

Let's move on to the basic settings of the Zyxel Keenetic Lite 3 router.

First, let's go to its interface from:

Before us opens the menu of the router, necessary for its further configuration.

Internet protocol settings

After entering the configurator, you can use the "Wizard quick setup”, which allows you to automatically get the simplest network settings. Next, we will look at the process of connecting to the network for each type of connection.

L2TP

This type of protocol is used by the Beeline provider. To establish a connection with such a network, we need to create 2 connections using a dynamic IP address and an L2TP tunnel.

Let's create the first one:

Attention! If you plan to use the IPTV function, then also check the corresponding port in this menu.

• check the presence of checkboxes opposite two more items - “Enable interface” and “Use to access the Internet”;
• in the field "Setting IP parameters" set "Automatically";

Important! The previous paragraph is mandatory. If you leave “No IP address” in it, then even with all the other correct settings, the connection will not work.

click "Apply".

After this procedure, you can start creating an L2TP connection:

Now you can connect the provider's cable to the router (if you have not already done so) and check for Internet access.

PPPoE

If you use the services of Rostelecom, Dom.ru and TTK providers, then we need to set up a PPPoE connection.

Attention! Some of the affiliates of the above providers instead of PPPoE connections may use a different type dynamic IP address. You can check this information with the service. technical support.

Let's start the connection:

1. go to the "PPPoE / VPN" section;
2. click "Add connection";
3. activate the checkbox opposite "Enable";
4. in the description field, set the name for the connection (it can be any, in Latin letters);
5. specify the protocol type "PPPoE";
6. in "Connect via" we specify the previously configured "Broadband ...";
7. set a name for the service, or leave this field empty;
8. specify the login and password for the connection;
9. "Authentication method" select "Auto";
10. click "Apply";
11. connect the provider's cable to the WAN port and check the connection to the network.

Video: configuring the ZyXEL Keenetic Lite III router

DHCP

For of this type connection using automatic receipt IP, we need to do the following:

• open the "Internet" tab and select "Connection";
• in the item "Setting IP parameters" set "Automatic";
• click "Apply".

3G Internet Setup

To set up a 3G connection, follow these recommendations:

Note! For each specific operator, the settings in point 7 will be different. You can check with your provider's technical support.

WiFi

To establish a Wi-Fi connection:

Attention! After the connection is established, the router will automatically connect to the Internet, without requiring you to click on the shortcut every time.

IPTV

Let's start connecting the IPTV function:

Important! This step may differ for some providers. If the operator does not support automatic IP acquisition, then select "Without an IP address". This information can be checked with the service provider.

• mark "Enable" and "Use connector" opposite the 4th port, which will be used to connect the set-top box;
• save the changes.

Software Update

Like any other program, software for Keenetic Lite 3 needs to be updated in a timely manner. You can do this in the following way:

Attention! The update will take a few minutes. At this time, do not turn off the router to avoid further errors in its operation.

When the router is updated and restarted, we re-enter the login information and in the software version line we see installed update. After that, it is recommended to change standard password and login. You can do this in the "System" and "Users" tabs by double-clicking on the required data and changing them.

Zyxel Keenetic Lite 3- Reliable and easy to use router. Its setup is almost the same as previous versions. If you are encountering this procedure for the first time, just follow our simple instructions or ask questions in the comments to the article.

Often, queries are written in the search, for example, "how to change the password on ZyXEL". To be honest, I don’t really understand what information a person wants to find, because you can change or set two passwords on the router: the one that protects the Wi-Fi network, and the one that protects the router settings. I agree, most likely you need information on changing the password for a wireless network, since few people set passwords to protect the control panel, and if they do, they do not change it for sure. Everyone immediately forgets them, then they reset the settings and set everything up again :)

Well, okay, now we will set or change the password for the Wi-Fi network on the ZyXEL router. And yet, just in case, I'll show you how to change the password to enter the router settings. Suddenly you need it. By the way, you will need to write an article about the need for good protection of your wireless networks and routers. Try to always set strong passwords. Yes, I understand, it’s difficult to fill in, you constantly need to enter them when connecting new devices, etc. But believe me, this is necessary.

I will write an article using the ZyXEL Keenetic Start () router as an example. Of all the "zyuhelov" only he is the one I have now. But, the article is suitable for all routers of this company. And yet, if you forgot your Wi-Fi password and you have a ZyXEL router, then in this way you can see forgotten password.

Setting and changing the password for a Wi-Fi network on ZyXEL

In the settings, go to the tab WiFi network (bottom). In field "Network Key" the password is specified currently in use. If you just want to remember the forgotten password, then rewrite it on a piece of paper, and you can close the settings.

If you would like to install new key network, then opposite the point "Network protection" select WPA2-PSK. And in the field "Network Key" indicate New password, which will protect your network. Password must be at least 8 characters (less, the router will not let you install). And push the button Apply. Try to remember the password, or write it down.

After changing your password, you may experience Wi-Fi connection problems on those devices that were already connected using the old password. The device remembered Old Password, and after the change, they do not match. For example, Windows may display the error "The network settings stored on this computer do not match the requirements of this network." On phones, the error "Unable to connect" may simply appear.

This problem is solved by deleting your network on a computer or phone and reconnecting to it, but with a new password.

As you can see, the ZyXEL password is very easy to change. Just as easy to remember forgotten key networks.

Change the password to enter the router settings

Let's take a look at the process of changing the password, which is used to protect the settings of the router. In the process of setting up your router for the first time, you most likely already set this password, as we did in the article on, for example.

In the control panel, go to the tab System, then select the tab at the top Users. Click on user admin. A window will appear in which, in the field Set password, enter a new password to secure the router. And push the button Save.

This password also needs to be written down somewhere, or filled out. If you forget it, you will not be able to access the settings and will have to do a factory reset. Such protection is also very necessary, and it must be installed. If someone else connects to your router, then he will not be able to get into the settings without knowing this password.

Usually, when the owner of the router begins to notice a drop in the speed of the Internet and the frequent blinking of the indicator lights of the router, even when he himself does not use Wi-Fi, the thought creeps into his head to change the password to WiFi. Below is detailed guide how to correctly change or set a password on a ZyXEL WiFi router.

What is a password for?

About protecting your wireless network you should take care immediately after purchasing the router, because it will allow you to exclude the uneasy use of your Internet for free, but most importantly, it will minimize the risk of violating privacy rights. The procedure for changing the access code takes less time than even reading this manual. The most difficult thing for most users, it turns out, is to come up with a complex password for their use. If there are problems with this, then there are special applications generating passwords of any complexity.

An unsecured wireless network is practically a direct door to all the files on the computer of the owner of the router. And also each user who logged out in global network through your Wi-Fi, does it under your IP address, and if he performs illegal actions on the Internet, all responsibility will fall on the owner of the router. Therefore, a complex access code will help protect against many serious negative consequences.

Password change procedure

To change the access code on the ZyXEL Wi-Fi router, you must perform several of the following sequential steps:

And if the code is irretrievably lost and forgotten, and the Reset key is broken or missing?

Despite the comical and seeming hopelessness of the situation, it is still possible to reset the parameters. To do this, you need to take several steps:

1. Connect the router to the PC via the "COM" port;
2. Start terminal application (8 bit, 9600 bit/c, stop 1 bit, honesty and flow control - negative);
3. Turn on the device;
4. An alert will be displayed on the monitor, with which you should agree and open "Debug mode";
5. Enter the command "ATSH";
6. Download the utility for Zyxel from the resource;
7. Then run the "rom" file, after unpacking archive file, and execute the command "ATLC", after that the recording will start.

Note: in the case of using the HyperTerminal utility, in the transfer window, specify "Send file" - "Xmodem", then, by clicking "Browse", specify the path to "rom" and send it. Then, using the “ATGO” command, restart the device.

How to change the Wi-Fi access code?

The following steps are required:

If you don't see your router's IP address in the list above. There are two additional ways determining the IP address of your router:

1. You can either follow the How to Find Your Router Address guide.
2. Or you can use our free software, called the router's IP address.

Now that you have internal IP address your router, we are ready to enter it.

Enter the default ZyXEL username and password

You must know the username and password to login to ZyXEL. All usernames and passwords for ZyXEL are listed below.

Enter your username and password in the dialog that appears. It looks like this:

How to set up a Zyxel password – ZyXEL Home Screen

Now you should see main screen ZyXEL which looks like this.

If you see this screen, then congratulations, you are now logged into your ZyXEL. You are now ready to follow one of our other guides.

How to set up a Zyxel router and change the password?

To change the SSID and/or wireless password on the ZyXEL, you need to access the router's interface through a web browser. To do this, make sure you are on a device connected to the router, open a web browser and enter the router's IP address (192.168.1.1 by default) in address bar, then press enter. You will then be prompted to log into the router.

The default username is admin and the password is 1234, but the password must be changed during router configuration.

After logging into the router, hover your mouse over the Network Setup option in the bottom menu and select the Wireless option from the pop-up menu.

In the wireless network section of the router, you will see "Wireless Network Name (SSID)" under the heading "Wireless Network Settings". Change the value in this field to change the SSID. Here you can also choose whether to transmit the SSID or not, set maximum amount devices allowed to connect wirelessly, and the maximum throughput for download / upload, allowed for wireless traffic.

At the bottom of the page is the "Security Level" section. Changing the security level will change the wireless security mode (none / WEP / WPA2), it is recommended to leave it on "More secure" if all your wireless devices support WPA2.

To change your password wireless communication, uncheck "Generate a password automatically" and enter the password you want to enter in the "Password" field. If you want the characters to be visible, you can check the "unmask password" field.

After making changes, you want to scroll down and click Apply.

Solving problems with setting up a Zyxel password

If you are unable to login to your router, here are a few possible solutions which you can try.

Zyxel password not working

You should try other ZyXEL passwords. We have a large list of ZyXEL passwords that you can try to find here. Your router's default password may be different from what we have listed here.

Forgot your Zyxel password?

If you forgot your router password, all you have to do is reset.

How to factory reset Zyxel?

You may have forgotten the password for your router and now you want to reset your password. First you need to factory reset your router, then you can use the default password to access your router.

How to set up a Zyxel password – How to reset a router

When the router is rebooted, the following settings change:

• Router name and password
• Wi-Fi username and password
• ISP username and password
• Any port settings you have made
• Any firewall settings you have made
• Basically, any configuration changes you have made to your router.

As you can probably tell from the list above, resetting your router is a big step. We need to proceed with caution.

• To reset your router, look for the tiny reset button, usually located on the back of the router.
• While you router, you will use a pin or the end of a paperclip to press and hold the reset button. You will need to hold if around 10 seconds.
• As a rule, you need to wait until the light changes on the router. Depending on the make and model of your router, the lights may start flashing.
• When you release the reset button, the router should be reset to factory settings.

How to Set Up a Zyxel Password – Find Your Router

Once the router has been reset, you will be able to log into it. After a reboot, the router will have the same internal IP address. If you don't know internal IP address your router, you can use our router finder to find a router on your network.

Type the router's internal IP address into your browser's address bar and press the enter key. You should see an interface screen on your router where you can log in with your username and password. If you don't know the default username and password for your router you can look above.

How to Set Up a Zyxel Password – Wireless Router

The reset process for your wireless router is the same. Locate the reset button located on the back of the router. Use a pin, paper clip or case to press and hold the reset button for about 10 seconds or until the light on the router changes.

How to set Zyxel password - DSL Router

Those of you with a DSL router should also contact your ISP for a WAN password to connect to the Internet. If you are not sure which type of router you will check on the back of the router. If your router is connected to telephone line, there's a good chance it's a DSL router.

How to reboot the router

• Disconnect the power connector from the back of the router and plug it back in.
• Wait about 30 seconds for the router to reboot.
• Your internet connection will be disabled when you restart your router. If someone is using a computer on the network to access the Internet, you can warn them.

How to change Zyxel IP address

IP - address local network router is also known as his internal IP address. This is also the IP address you connect to when you want to set up the router. It is only useful within your network and is not used from the Internet side.

Applications: Top Apps for kids on iOS or Android.

Routers have 2 IP addresses: internal IP and external IP. External IP address is assigned to you by your ISP or ISP, and is generally not something you can change. The internal IP address is factory-set by default, but can be changed if you wish.

Common internal IP addresses for routers:

• 192.168.0.1
• 192.168.1.1
• 10.0.0.1

It's generally a good idea to make the last number of your router's internal IP address "1", as in 192.168.0.1 or 10.0.0.1 . This is optional, but many do, and it's a little easier to remember which IP address your router is assigned. If you want to change your router's internal IP address, this guide will show you how.

How to Set Up a Zyxel Password – ZyXEL Login

To start setting up the ZyXEL LAN page, you need to log in to your router. If you are already signed in, you can skip this step.

To login to ZyXEL, follow our guides above.

Changing the LAN IP address on ZyXEL

If you followed our registration guide above, you should see this screen.

After logging into the ZyXEL router, you will be taken to homepage. To change your IP address, click Network Settings at the bottom of the page. Then click LAN Setup at the top.

Set up the LAN partition of your ZyXEL

This will take you to the page you see above.

Now you can change the IP address of your router. Enter a new address in the field. Don't know what you should change? One a good option – 10.0.0.1

Just under the subnet mask. Don't forget to leave it alone. It is important that this stay is 255.255.255.0

Congratulations! That's all. Just remember to save your changes before closing the page.

Possible problems when changing the IP address of your local network

When you change your IP address on a local network, you are making a fundamental change in how your network functions and all computers on your network will work. You will lose your internet connection when applying these changes. Your router may reboot and take a couple of minutes to start responding again.

Also note that some computers may be restarted after you make this change before they can talk to the router or the internet again.