Programs

Why can't I access my router settings? Why does not go into the settings of the router and what to do ?! Configuring Automatic Obtainment of IP Addresses and DNS Servers

During the operation of the router, each user periodically needs to enter the configuration of the network device to make changes to the router settings. It seems to be easy to perform such an operation, but sometimes unforeseen problems appear and for some reason it’s impossible to get into the device’s web client. What can be done in such a situation?

So, you wanted to log into the router's web client, but this page does not load in the browser. There can be several reasons for such an unpleasant phenomenon, from very simple to quite complex. For example, an unstable connection to the router, an incorrectly specified IP address, incorrect settings network card computer and so on. Let's try to solve the problem on our own.

Initial actions

At the very beginning of the search for the reason for the lack of access to the router configuration, it is advisable to perform the simplest manipulations in the following sequence.

Check router power. Maybe it's just not enabled.
Try logging into the router's web interface using a different web browser.
Temporarily disable anti-virus on your computer software and firewall.
Try to get into the router settings from any other device.

It is possible that your router is frozen and not working correctly. Therefore, you can try to reboot the network device. This operation is very simple and takes only a few minutes. You can read in detail about how to reboot the router in another article on our website by clicking on the link below. This instruction It is quite applicable to any routers, and not just to TP-Link. At the same time, restart your computer.

Method 2: Find out the IP address of the router

There is a possibility that you or another user with access to the network device has changed the IP address of the router (by default, most often 192.168.0.1 or 192.168.1.1) and that is why you cannot open the web page of the router. Using built-in operating system tools Windows systems you can quickly find out the current IP of your network equipment. Read about how to do this in another instruction on our resource by clicking on the link.

Method 3: Checking the connection with the router

Maybe there is no connection to the router? At work Windows desktop you can quickly check if your PC is connected to the router. In the lower right corner of the screen in the tray we find the network status icon. There should not be any extraneous signs, red crosses and the like.

Method 4: Get an IP Address Automatically

The problem of not accessing the router configuration parameters may appear due to the fact that someone has set the static IP address type in the settings network connection your computer. Therefore, it is necessary to check the status of this parameter, and if it is changed, then return to automatically obtaining the default IP address. Let's see the algorithm of actions in this direction on a PC with Windows 8 on board.

Method 5: An alternative way to log into the router's web interface

You can try to get into the router configuration through the built-in windows tools. This option may help in some cases. As an example, consider the eighth version of the operating system from Microsoft.

Method 6: Rollback router settings to factory settings

If none of the above helped, you can resort to at least. Reset the router configuration to the factory default, that is, set by the device manufacturer by default. You can read about how to do this in the article on our website. The methods given in the instructions are relevant for routers of all brands, not just TP-Link.

As you can see, there can be several reasons for the lack of access to the web page of the router, as well as ways to solve this problem. Therefore, try all the options in sequence. Who seeks will always find!

Many users, when buying a router, may experience problems with it even before the connection itself. Often it is not possible to even enter the router settings. When you try to enter the address 192.168.1.1 (or another, which is most often registered on the bottom panel of the device), the message "Unable to connect to the remote server" appears. In this article, we will talk about how to solve this problem.

1.1 Check the connection of the router with the computer

As a rule, the connection cable comes with the router. If your device does not have it, you will have to purchase it. The cable must be connected to the computer, even if you plan to use wireless connection. Next, you need to follow the appropriate instructions:

Turn on the router and connect it with a special cable to a laptop or computer. (Most often, the cord entry is marked in yellow on the router case.
The LAN indicator on the router should light up.
Wait for the computer to find a connection to the router. (At first, the network icon will have a yellow triangle with an exclamation mark. This is normal)
If you managed to connect the router, go to any browser and enter the address 192.168.1.1 in the address bar.
If it doesn't work, continue with the setup.
The laptop could connect to the device via Wi-Fi. If so, disconnect from the wireless network.
Next, connect the router with a cable.
Check the IP address. Sometimes it may not be 192.168.1.1. (In TP-Link, you can see it in the settings and login / password section)
In some routers, the IP address is registered on the bottom panel.

You need to enter the address in the address bar, and not in the search. Many inexperienced users make such a mistake, which is why they cannot enter the settings.

If all of the above methods did not help, try using a different browser.

Sometimes your computer or router may have its automatic IP and DNS acquisition disabled.

1.2 Checking computer settings

Click on the network icon in the lower right corner of the desktop. After that, go to "Network and Sharing Center and public access».
On the left, you'll find the "Change adapter settings" section. In it you need to go to "Connect by local network” and select “Properties”.
Next, select "Internet Protocol Version 4 (TCP/IPv4)" and go to "Properties". There, check the box next to "obtain IP and DNS addresses automatically". Save the changed settings.
If after all the manipulations you were unable to enter the router settings, the problem may be in the device itself.
Setup via "My Computer"
Go to "My Computer" and select the "Network Infrastructure" tab.
Then click on "View Web Page" right click.
After that, the browser will automatically turn on and the router page will load.

This method works if you have changed the IP address of the router. This may happen accidentally when setting up the instrument.

1.3 I enter the settings, but the username and password are incorrect, what should I do?

In this case, you just need to specify the username and password, which are indicated on the information sticker.
Most often it is located on the bottom of the router. If the authorization page constantly reloads after entering the password, enter the standard data.
If entering standard data did not help, reset the settings to factory settings. Sometimes it happens that the customizer from the provider entered his own login and password, but did not tell you. In this case, you will have to reset the settings and carry out all the manipulations again.
There is another option in which the router can simply break. The most common reason for this is bad firmware. You can try to restore it, but most likely you will have to think about acquiring a new one. If the indicators blink strangely, then the problem is in the firmware of the router.

2 Expert opinion

“In the LAN connection settings in the gateway, 192.168.1.1 must be specified. The address must be the same. If you cannot change the settings yourself, then it is better to contact specialists, as you can complicate the situation. I do not recommend resetting the settings yourself without writing down the manual for this process because you don't have internet, - writes Internet user Valery.

We hope that you were able to find the answer to the question about what to do if you can’t enter the router settings? If you still have problems, try repeating all of the above manipulations.

Do not require regular intervention in their work. As a rule, it is enough to set them up once and after that they can work for as long as you like. But, sometimes situations arise when it is urgent to make changes to the router settings, for example, in order to change the password for WiFi. In such a situation, the question arises of how to open the router settings. In this article, we will talk about how to quickly and easily access the router settings.

The username and password are required in order to protect the router from being changed by third-party users. The standard login and password is indicated on the box of the router or in its instructions.

If you do not know which username and password to use, you can try the following options:

These login and password combinations are often used by router manufacturers as standard. As a last resort, if you cannot remember your username and password to access the browser settings, you can run

Quite often, users cannot enter the settings of their own router. This problem becomes the reason why they cannot use the Internet. Given the fact that the Internet is needed in work and everyday life, you need to solve the problem with the router as quickly as possible.

What are the most common causes and what needs to be done in order to solve all the problems on your own? The answer to all these questions is in our article.

There are many reasons why users cannot enter the settings of their router in any way. Usually, you rarely need to enter the router settings, but this does not mean that the login problem can be ignored. That is why this problem needs to be solved as quickly as possible. So, what is most often the cause of any malfunction in the router?

The router is not plugged in or turned on, but there is no indication

Many users make a banal mistake and simply forget to plug the router into a power outlet. As you know, the router cannot work without power supply. For this reason, before trying to enter the settings of the router, you need to make sure that it is plugged in.

It also happens that the router seems to be plugged in, but it still does not turn on. The reason for this may be a malfunction of the outlet itself.

In some cases, the router is also turned on, but there is no indication. It is possible that everything is fine with the power supply, but the problem lies in the malfunction of the indicators themselves. They could simply burn out. This does not happen so often, however, some models are famous for the fact that indicators constantly burn out in them.

The computer is not properly connected to the router

Some users do not know exactly how to connect the router to the computer. If we are not talking about a wi-fi connection, but about connecting the router to the computer via a wire, then for this you need to use the lan port. Unfortunately, quite often people confuse this port with other connectors that are located on the system unit. That is why there are many problems.

In order to solve this problem, you need to study the instructions for the router as carefully as possible. It shows exactly how the connector looks like, into which you need to plug the wire from the router in order to connect it to the computer. Only after the user has studied the instructions, you can start the connection process.

In some cases, users do not use the cable they need at all. Usually, the cable for connecting the router to the computer is thick enough, so it is easy to distinguish it from the rest.

Attempt to access the wrong address of the router

In order to enter the settings of the router, you need to open any available Internet browser. In the address bar of the browser, you must enter the address of the router.

Router addresses vary by manufacturer and model. That is why in order to find out the exact address, you need to study the instructions. If it was not possible to find such information in the instructions, then you need to contact the developers of the router. To do this, go to the website of the equipment manufacturer, and then visit the section where the contacts of the service are indicated. technical support. There I can tell you exactly which address you need to dial in order to enter the router settings.

If you have a router at hand, then you can see its ip-address on reverse side devices.

Also with almost any search engine you can find out the address for many models of routers. To do this, in the address bar of the browser, you need to type the phrase "go to the settings of the XXX router", where "XXX" is the router model.

If you still cannot enter the settings, you should enter the combination "192.1.1.0" or the combination "192.1.1.1". This combination suits many popular models routers.

Another reason why users cannot enter the settings is the banal ignorance of what is address bar, in which you need to enter the modem address.

The browser address bar is the white box at the top of the browser. It is in it that the addresses of the websites that the user visits are displayed. In it, you need to enter the modem address in order to configure it.

Router freezes

Quite often, users experience freezes. What should be done in such a case? Most often, freezes are the result of overheating or problems that are associated with the quality of the components of the router, which are located directly in its case. How to be in that case?

First, try unplugging the router's power cable from the outlet and plugging it back in. After this, the router will start up again and the problem may no longer appear.

In order to prevent problems related to overheating, you need to place the router away from system block. It is possible that the heat that comes from it is the cause of overheating. It is also worth understanding that the router can overheat if it is standing by the window and direct sunlight falls on it.

If overheating is associated with a technical defect, then fixing the router will be much more difficult. To do this, you need to replace certain elements directly in the router case itself. You also need to understand that this can only be done if you can get spare parts. The easiest way is to replace such a router with the manufacturer if the warranty has not yet ended.

The computer does not receive an IP address from the router

Sometimes the router cannot communicate with the computer. The reason for this may be that the user has not enabled DHCP.

In this case, you need to go to network settings computer and find the option called DHCP, and then check the box next to it.

On every version operating system Windows for this you need to go to different menus, but finding them will be easy.

You only need to know that all the settings that relate to DHCP are located in the network connections and Internet section.

Incorrect login or password

Another common problem is entering an incorrect or outdated password. Usually, by default, on many routers, the word “admin” is used as the login and password. If it does not fit, you need to clarify the information from the instructions.

Another popular problem concerns incorrect login or password entry after the user has already installed New password instead of factory. How to be in such a situation? To do this, find the reset button on the router case and press it. After that, all router settings will be reset.

It should be understood that in this case, you will have to configure the modem again, but this is the only way to reset the password if the user has forgotten it.

It happens that you need to use a needle to press the reset button, since this button is recessed deep into the case just so that users do not accidentally press it.

Using a router (in Russian - a router), the user distributes network connection data packets. This forms a Wi-Fi zone, making the owner's Internet traffic available to all devices that connect to it.

Sometimes users want to change the device settings to change the network password, username, or track devices that connect to the Wi-Fi zone.

For this you need get into the control panel of the router, the path to which is the IP address assigned to it. The most common options are combinations of 192.168.0.1 and 192.168.1.1, as well as 192.168.100.1.

In the article, we will tell you what to do if you cannot enter the settings menu by typing the IP address of the router in the browser. The screen displays "Page not available", "Unable to display ..." and similar errors. Pay attention to the standard terms described in the field of creating a network connection and our instructions for solving problems both wired and wireless connection and access to the address settings 192.168.0.1.

Features of the router and Wi-Fi network

The IP address depends on the router model and its manufacturer (for example, for an Apple model, the address starts with the number 10). It can also be changed by the user himself by accessing the settings menu.

Not all devices can access the Internet directly using Wi–fi. The router, in addition to the connector for the ISP cable, has other connectors.

The LAN and its cables serve as wired connection to devices that are unable to recognize wifi network. They are connected from the router to the end device. In addition to using LAN cables, the user can choose to purchase a wi-fi adapter for the device.

Does not go to 192.168.0.1 - connection methods

Before looking for reasons, you must make sure that the settings menu does not work for you.

Knowing the IP address of the device, open a browser (if you tried it on one, open another) and on any tab in the address, without a dot at the end, enter the combination and confirm. If your Wi-Fi has a password, the panel that opens will already be a positive sign.

Open "Explorer" (relevant for Windows) by right-clicking (RMB) on the "Start" button or by pressing Win + E and go to the "Network" category. This method works exactly for LAN cable connection methods.

When clicked, the model of the router connected to you will be displayed. If it is not there, the obvious conclusion is that the computer did not establish a connection through it. Right click on virtual model router and go to "View Device Web Page". It should display the settings menu.

Clarification of the IP address

Why might you not find the router device in the Network category? The last method may not be relevant for devices connected to the Internet through a Wi-Fi zone. Even if your system (computer or laptop) and its motherboard do not have a built-in receiver for Wi-FI recognition, check USB inputs. They may have a Wi-Fi adapter. A device that demodulates Wi-Fi radio waves for such devices, allowing the system to receive network information.

In this case, the recorded IP address may simply not match the actual one. You can check this in the following ways:

Check on the label of the router,
Checking in the connection panel information about the router,
Usage command line.

You can also explore background information by models and their manufacturers, but this will not save you from the situation if you changed the IP address manually.

The sticker, which displays the initial login and password with the IP address of the connection to the router, is located on the rear panel of the device (most often, the login and password are the use of the word admin).

You can check this by opening the Control Panel, then "Network and Internet", go to the "Network and Sharing Center". Here, in the "View Active Networks" mini-tab, you will find the categories "Access Type", " home group” and “Connection”. You are interested in "Connection", go to it. A connection status window will open, click on "Details" and find the IP by "Default Gateway".

You can find the IP address using the command line. Use the key combination Win + R, enter cmd, a window will open, then enter ipconfig / all. Look for the main network connection, your target is "Default Gateway".

Other reasons for the inaccessibility of the settings panel

What to do if you specified your IP, but you still unable to access 192.168.0.1? To determine other causes, pay attention to the network connection status in the system tray. The ascending ladder icon indicates the type of Wi-Fi wireless connection, the cord icon to the monitor indicates a LAN connection.

In the tray alert "No available connections". In that case, check:

The presence of drivers on the network card / wi-fi adapter. Go to the "Device Manager" through the search in the "Control Panel". Find your network card module or wifi adapter in the category " Network adapters". If the driver is installed, you will not see Exclamation point to the right of the name.
LAN cable work. The network connection cable may be damaged, or the jack it is plugged into may be damaged. You can change the connectors on both the router and the computer.
Network status in the tray "Identification" and "Unidentified network":
Settings: no automatic detection of IP and DNS,

The dhcp service determines third-party IP addresses (site addresses) without user assistance. Should work for her DNS server. Similar to the way to determine the IP through the system control panel, by going to "Connection", come in in "Properties". In the Internet Protocol version 4 component, double-click on the component and in the new window that opens, make sure that the auto-detect checkboxes are active.

Conclusion

All of the above methods often guarantee a solution to any problems related to the lack of access to 192.168.0.1 and 192.168.1.1 addresses. But if all of a sudden you still can’t enter the router settings, contact our computer service, we will definitely help!