How to set up wifi byfly step by step instructions. LAN setup

If you want to connect to a WiFi network through the Beltelecom operator, then you should take into account the fact that the connection is not the same as when connecting to a regular wireless Internet. The algorithm of actions is almost the same: a person selects a wireless network from the list of proposed ones; then clicks on the “Connect” item, but unlike other WiFi networks, when connecting to Beltelecom, the password entry window does not appear. This is followed by several unsuccessful attempts to load web pages. And, ultimately, the user is convinced that there is no Internet on the device. Many habitually attribute it to a bad signal, but the only reason is the need to pay for the service to the provider.

What needs to be done to connect to the Beltelecom Wi-Fi network using a tablet?

Since the billing in the network is per minute, then Internet access is unlimited (there is no traffic limit). The countdown starts from the moment of connection and ends after disconnection. When reconnected, the meter operation resumes.

2. To connect to the network, do the following:
- use a coin to remove the protective layer;
- activate Wi-Fi search on the tablet where BELTELECOM or byflyWIFI operates;

Log in to any browser and try to load some site. You will be automatically redirected to the login page by entering your username and password;
- enter the data on the back of the card into the appropriate fields. After that, you will be able to fully enjoy the Internet from the Beltelecom provider for the period of time indicated on the card.

3. It will be much easier for regular byfly subscribers to connect to the Internet. It is enough to use the login and password specified at the conclusion of the contract for the receipt of services. You can also clarify this information in the Beltelecom service center if it has been lost. It is only necessary to apply to the same address where the contract was directly concluded. After that, the authorization data must be entered in the browser by opening any web page (that is, perform the last three steps indicated above in paragraph 2).

If you want to become a Beltelecom client, just contact the nearest service center company or send an application with .

What should I do if the login page does not appear?

If your house (cottage, office, apartment, suburban housing) does not have the ability to deploy cable system to connect to world wide web”, or laying a network is not economically feasible, an ADSL modem with built-in Wi-FI is used to “go out into the world”. As you know, Wireless Fidelity is the world standard for equipment designed to organize wireless local area networks operating in the broadband radio range. Benefits Wi-Fi modems is an:

The ability to access the network at any access point;

Fully compatible with certified devices marked with the Wi-Fi logo;

Low level of radiation (compared to mobile) during operation;

100% user mobility.

The article describes how set up WiFi ByFly on the example of the Promsvyaz M-200A modem.

To configure the modem, you need to get to its web interface. To do this, in the address bar of your favorite browser, enter http://192.168.1.1, and press enter. If done correctly, the modem will prompt you for an administrator username and password. The default username and password is admin.

If the name and password request does not appear, you need to check whether the computer is connected to the modem correctly and whether it received an ip-address from it. To do this, in the properties of the wired network connection, in the properties of the TCP / IP protocol (Internet Protocol version 4 in Windows 7) should be automatic ip addresses. Network connections can be found: in Windows XP- Control Panel-Network Connections Windows 7- Network and Sharing Center - Change adapter settings.

If even after that you cannot get to the modem's web interface at http://192.168.1.1/, you should try resetting the modem to factory settings. At the bottom of the modem case, find a small hole signed RESET or RESET and use a needle to hold down the button in the hole for 5-10 seconds and then release. The modem will reboot and its settings will return to the factory settings. It can also help if you have already configured the modem yourself and mistakenly changed some important parameters, as a result set up wifi byfly does not seem possible.

So, we got into the web interface of the modem. The modem menu is located at the top of the screen, below its settings, divided into blocks. To set up wifiyou need to go through 2 stages: 1st stage - setting up the modem in router mode, 2nd stage - setting up an access point (actually wifi).

Let's start setting up the modem in router mode. In the top menu, press alternately then below - Internet. In the Encapsulation block, set the ISP parameter to PPPoA / PPPoE, while the settings window should look like in the image. In the PPPoA / PPPoE settings block that appears, in the Username field, enter the username for connecting to the Internet, in the Password field - the password. This data can be found in the contract for the provision of Internet connection services. The Bridge Interface parameter is set to Activated, below the Default Route parameter is Yes. After changing the modem settings, you must save them. You can do this by clicking on the SAVE button at the bottom of the screen. This completes the modem setup in router mode, let's move on to setting up the point WiFi access.

Select from the top menu Interface Setup - Wireless. The window will take the form shown in the figure below. PerSSID switch parameter install on activated. This option will enable WiFi and it remains only to configure the parameters of our network. Parameter SSID is responsible for the name of our network, this name will be seen by all devices equipped with wifi module within range of your modem. Parameters Authentication Type and Encryption provide security for our WiFi networks, set them according to the picture. In field pre-shared key you need to create and enter a password to connect to wifi, it can consist of both Latin letters and numbers and must not be less than 8 characters. Clicking on a button SAVE with save current settings wifi.

Now you can disconnect the cable from the laptop and connect to the created network by entering the password.

So, if you independently managed the modem settings , You can access the network anywhere within the Wi-Fi coverage area. But if WiFi Byfly setup you are having difficulty, it is better to contact the services of the Reanimator company. In a matter of minutes, you will become the full owner mobile device, which will provide you with communication with the whole world.

Now technical devices are not a luxury, but a necessary means for work. And often in the same house, in addition to a stationary computer, you can see a laptop, tablet, netbook, etc. Undoubtedly, access to the Internet is desirable for all of them. Pulling the cable from the modem is not very convenient, and often not possible. Therefore, it is much more profitable to use an ADSL modem with wi-fi (). The modem used in router mode will make it possible to connect several devices to the network at once without additional settings.

Benefits of using wi-fi

Before setting up Wi-Fi, let's take a look at the benefits we'll get by using this modem standard. Wireless Fidelity allows you to organize wireless networks operating in the broadband communication range. Advantages of modems with Wi-Fi:

• Lower radiation level than when using 3-G modems;
• Compatible with almost all modern devices;
• High user mobility, independence from modem location, etc.

We get the opportunity to create a wireless home network with just one modem. you will be able to have unhindered access to the network at any point within the radius in which the device operates. You can share files and surf the Internet without resorting to wires or cables.

Modem setup

In order to set up wi-fi on byfly, you will need a modem that will be used as a router, a computer, a laptop and network cable. The latter usually comes with a modem. Consider the settings on one of the most popular Promsvyaz M-200A models. How else can I set it up popular model router like Asus RT-G32 you will recognize. Just don't forget that you need to be a Beltelecom subscriber who offers Internet service from ByFly.

First, connect the cable to desktop computer on one side and the modem port on the other. We do this with devices turned off. After they are connected to each other, turn on the computer and wait until it boots up. Next, press the modem power button on the modem and wait until the router is initialized. If the computer has old antivirus, which is not updated, it may block access to the Internet. Therefore, you must either disable it completely or install new software.

Now open Google Chrome or another browser you are using. V address bar write 192.168.1.1 and press Enter. This action will help us get into the modem's web interface. If everything is done without errors, you will be prompted to enter a username and password. The default here is admin.

The next step is to open the Interface Setup tab, which will allow you to set the modem settings. Here we are interested in the item Internet. In it, we change the settings in the username and password lines, enter here the data from the agreement with the provider. The Default Route parameter must be set to YES. If you have done everything, press the SAVE button. Setting up the modem for use as a router is now complete. Next, you need to set up Wi-Fi.

To do this, go to the Wireless tab. We activate the PerSSID Switch parameter here. The network name is written in the SSID line. The Encryption and Authentication Type fields are responsible for the security of the connection. The Pre-Shared Key line requires you to enter a password to connect via Wi-Fi. It must consist of numbers and Latin letters, at least 8 characters in size. Save all entered parameters by pressing SAVE.

Actually, that's all you need to do. Now turn on the laptop and try to connect to the network. The first time you will need to enter a password. Subsequently, this will not be required when installing and saving the corresponding settings.

ByFly is a trademark of Beltelecom, which provides access to the Internet. The company offers its customers to configure the network using the service technical support. However, sometimes waiting for your turn can drag on for several hours.

Access to the network can be established independently. Setting up WI-FI on ByFly takes only a few minutes. The main thing is to know how to do it. We hope that our article will help you set up a network card and router to access wireless Internet.

PC setup

To establish the Internet on a computer, first the router is connected to the network and the devices are connected by wire. After that, work is done network card.

The picture shows how to find out your OS on a computer:

Windows 7

To connect a Windows 7 PC to a network, proceed as follows:

• enter the Start menu;
• switch to the sub-item "Control Panel";
• "Network and Internet" - "CC networks" - this is the sequence of choosing the following items;
• a new settings window appears, select the "Change adapter settings" column;
• an inscription appears: "Connection via local network", which is clicked with the mouse button located on the right side, and redirected to the "Properties" sub-item;

• click on the "Properties" button, which is located below the inscription;
• put a tick in the box where it says: "Use the following IP address";
• numbers are driven into the column: 192.168.1.2, while if you plan to connect several devices to the router, then the coincidence of these data and the data from the last line is unacceptable;
• the following data is entered into the line "Main gateway": 192.168.1.1;

• they drive in the addresses of DNS servers, which are presented on the official ByFly portal.

Windows XP

For Windows XP, perform the following manipulations:

• the first two steps correspond to setting up a system with Windows 7;
• after that, make the transition to the sub-item "Network connections";
• the inscription appears: “Local Area Network Connection”, which is clicked with the mouse button located on the right side, and the “Properties” column is selected;

• under the inscription: "Components used by this connection" select "TCP / IP connection protocol" and click on the "Properties" column;

• enter numerical values, as in the last four paragraphs windows settings 7;
• confirm the action and at the same time save the settings by pressing the "OK" key.

For a video tutorial on setting up a network card, see the following video:

Router setup

You should also familiarize yourself with how to set up Wi-Fi on the modem. It depends on the brand of the device. However, there are a number of manipulations that are common to all devices:

• enter the router settings (to do this, enter the address of the router, which is indicated on the bottom panel - for example, for the Promsvyaz M-200A device, this is 192.168.1.1);
• open the settings site;
• drive in the login and password into the windows (factory admin / admin);

• confirm their actions by pressing the "OK" button.

To set up Wi-Fi, follow the instructions that came with the router. We will consider setting up the Promsvyaz M-200A router for WiFi connections on ByFly:

1. In the "Interface Setup" tab, select "Internet".
2. In the "ISP" menu, select the third value "PPPoA / PPPoE".
3. In the appropriate fields, we drive in the login and password that you received from the provider.
4. In the line "Bridge Interface" select "Activated".
5. In the line "Default Route" mark "Yes".

1. Click "Save" and select "Wireless" (above).
2. Activate "PerSSID Switch".
3. Give your network a name and create a password.
4. Save.

Network connection

To connect to WI-FI using a wireless connection, perform the following manipulations:

• the first four items correspond to the steps for Windows 7;
• after that, with the mouse button located on the right side, click on the inscription: “Wireless network connection” and are redirected to the “Properties” sub-item;
• click on the inscription: "Internet Protocol 4 TCP / IPv4";
• click on the "Properties" button;
• set the IP address and DNS addresses;
• with the mouse button located on the right side, click on the inscription: " Wireless connection” and are redirected to the “Connection” sub-item;
• opens the " Current connections”, where they choose the type of their connection;

• click on the "Connect" button;
• a security key is driven into the window;
• confirm their actions by clicking on the "OK" button.

If all the manipulations are performed correctly, you can start using the Internet.

How to set up Wi-Fi on ByFly, you can also learn from the following video instruction:

Public WiFi

You can connect to the wireless Internet from Beltelecom even without concluding an agreement, though for a short time. You can do this in public places.

1. Turn on Wi-Fi on your phone and select the Beltelecom network, click "Connection".
2. Try to go to the browser and try to visit any site.
3. You will find yourself on the page to enter the network, where you need to enter your phone number and select free access to Wi-Fi.

1. Authorization data will be sent to your phone number. After entering them, you can use free access albeit only 15 minutes.

For permanent access to the Beltelecom public network, special rechargeable cards are sold, which give the right to use Internet access.

Personal Area

V Personal account you can pay for Internet services, view the status of your personal account. To enter the cabinet, you need to enter your username and password. Login is the contract number, the password must be written in the contract. The password can be changed.

In the Personal Account, Beltelecom clients can access information on router settings various models. Describes in detail how to set up a computer network card on different operating systems and Wi-Fi connection procedure.

How to set up WiFi on a Byfly modem? The Byfly provider offers high-speed Internet access to its users.

The company produces only modems that can be connected to a computer with via USB and a special program.

What to do if you need to convert the modem to a WiFi hotspot. Let's take a closer look at all the main methods for converting a modem from Byfly to a kind of "router".

Creating an access point via modem

If you do not have the opportunity to create your own home network (using a twisted pair cable) or it is not profitable for you, you can find other ways to create a universal Internet access point for all devices in the room.

Great way to get fast access to the Internet - use a regular modem.

However, it should be noted that the modem must support high-speed traffic and have a sufficiently large amount of paid traffic, since several devices will use it at once.

Using a modem, you can always access the Internet, regardless of location.

The main requirement is the availability of operator coverage, and it is available almost everywhere in urban areas.

The principle of operation of the modem is almost identical to the process of functioning of a conventional router.

Also, the modem has a much lower degree of radiation than a regular router and even a telephone.

Let us consider in more detail the main way to configure Wi-Fi using the example of modems from the promsvyaz models zt zxv10, hg532e, h108n and huawei hg8245a, m 200a, zxhn h208n.

All these modems work on the same principle, so they are configured in exactly the same way.

The main way to set up on Windows - Instructions

Follow the instructions and photos to set up the Internet using a modem on a computer, phone and laptop:

• Go to your computer's control panel and find the network and control center. Turn it on;

• In the window that opens, find the link to open the adapter management window, as shown in the figure below;

• Click on the wireless network adapter and turn on its detailed properties window;

• Make sure the connected modem is working properly;
• In the window that opens, enter the data: username and password (in most cases, these are admin and admin - login data that is automatically entered by the manufacturer - huawei and other manufacturers set exactly such login data).

If you are not logged in, contact your ISP for the password and username.

While changing all the settings, the device will work exclusively using the ftp protocol, that is, it will exchange data with the server;

• After entering the data, the page for setting the parameters of the used device from the promsvyaz will open;

• Go to the Interface Setup menu;
• Now find the mode called Default Route and check the box next to Yes. Including this mode, you allow the adapter to distribute the Internet to several devices at once, that is, create a full-fledged access point to the Internet from it;

• At the bottom of the page, click on the save all changes button;
• After that, the system may require you to restart your computer and modem. After the reboot process, connect the devices again and re-enable the adapter settings window, as described above in the instructions;
• Go to the Wireless tab in the settings;
• Duplicate all settings as shown in the picture for your adapter. Also, in the settings, enter the network name and set your password for access. According to the standard, it is necessary to set a password, which is at least eight characters and / or numbers.

After completing all the steps in the instructions, restart the adapter and computer again. Then try to connect to the wireless internet.

If the connection was successful and Internet access appeared, this means that you can access the network not only on your computer, but also on your phone and other devices that can connect to a Wi-Fi hotspot.

Advice! Please note the following nuance: the modem will work as an access point only while it is connected to a running computer. In other cases, the adapter will be disabled and, accordingly, will not be able to distribute the Internet.

Instant network updates

If you encounter any problems with the configured network, you can update its operation using the adapter settings.

Go to the Maintenance tab, enter passwords from the network and reset the adapter settings.

Then you can repeat the setting again to restore normal functioning Internet access.

You can also reset the settings if you inserted the wrong parameters during the creation process wireless hotspot access.

Video:

How to set up Wi-Fi on ByFly

How to set up Wi-Fi on ByFly? Modem M-200A. Setting up a wireless internet connection. WiFi setup on the promsvyaz modem (Provider ByFly).