Graphics

Make a copy of installed windows 7. Backup and restore Windows drivers

We recently published an article on how to create a Windows 7 and Windows 8 system backup image. After reading which, you can make sure that it is on the shoulder of anyone who is already familiar with the computer to some extent. Now we wanted to tell you how you can recover from it. We wrote 2 instructions: 1st for Windows 7 and 2nd for Windows 8/8.1. In this article, we will look at how to restore a system image from backup for Windows 7, which is also not difficult, if you follow the instructions and pictures, you can do everything yourself.

There are several ways to restore from a backup version - this is to create a boot disk in advance or use a USB flash drive or disk with the Windows 7 operating system from which the installation was carried out.

Step 1 Insert a disk or flash drive into a computer / laptop

Step 2 Immediately after turning on the power of the computer, start making quick keystrokes:

Acer: F9
Asus: Esc
Dell: F12
HP: F9
Lenovo: F12
Samsung: F10

Press the button until the display shows a menu with a choice of devices to download, each manufacturer may have a different menu

Step 3 Select the boot device CD drive / USB flash drive and press Enter, usually the following characters are indicated in the name of this device: ODD, CD, DVD, USB or the name of your flash drive

Step 4 If you are booting from a disk, then the following line will appear on the screen of your laptop, if from a USB flash drive, then go to the next step

Press any key to boot from CD or DVD…

Press any of the keys to download

Step 5 In the window that appears, you will need to select the language, keyboard and country and click Next

Step 6 In the window that appears, select System Restore

Step 7 In the next window select Restoring a system image

Step 8 Select layout and language, click Next

Step 9 In the window that appears, select Restoring a computer using a previously created system image and press Next

Step 10 The window that appears automatically selects Windows image 7 previously created by you (recommended), press Next to continue

Step 11 In the next window, click Next

Step 12 In the window that appears, click the Finish button and agree to restore the operating system

Now just wait a bit and you're done. Your computer with a fresh reinstalled operating system.

It is important to remember that the disk on which restore Windows 7 will be erased!

Add the article to your bookmarks, and also subscribe to our communities in in social networks where you can find more useful information

V operating system Windows 7 has built-in backup tools that let you back up the Windows operating system and user data. Archiving will allow you to create a backup image of the system and other user data, with which you can restore the system after serious problems.

This article will give an overview of using the built-in tools Reserve copy Windows 7. The built-in backup tools of the operating system, in terms of their capabilities, can satisfy most computer users.

How to make a backup? There are quite a few backup programs, among them are such popular programs, like , Nero BackItUp, Norton Ghost, Paragon Drive Backup Professional, . You can also back up your system without the help of third party programs using the Windows Backup and Backup tools.

Why is backup desirable? Because, in case of reinstalling the Windows operating system, for any reason, all the data that is on the computer will be lost on your computer. system drive. You will have to reinstall all programs, make other settings for the operating system.

Suddenly, due to rejection hard drive or from exposure to viruses, you can lose all your data, and not always lost data can be recovered by recovery specialists.

The way out of this situation is to create a backup copy of the system and other files you need. After a sudden system or hardware failure, you can restore all data from a backup. The operating system, drivers, programs and other files that you backed up will be restored to your computer.

Now we can move on to an overview of how archiving works in Windows 7.

In order to start a system backup, go to the Start menu => All Programs => Maintenance => Backup and Restore. You can also launch the built-in Windows backup and backup tools from the Start menu => Control Panel => File Backup and Restore.

It may happen that in case of serious problems with the operating system, you will not be able to boot the operating system in normal or in safe mode. Then you will have to use the Windows 7 installation disk, or a bootable USB flash drive, with the image of the operating system recorded on it to restore the system.

Boot Windows flash drive can be created using specialized programs, reviews of which you can read on my website in the "Programs" section.

In the absence of you installation disk with Windows 7 operating system, you should create a system repair disc. The recovery disc, which contains the recovery environment, can be used to boot the computer.

This system recovery disc contains Windows operating system recovery tools that can be used to restore the operating system after a serious error, or restore the system from a created system image.

Create a System Recovery Disc

For those users who have pre-installed operating systems on their computer, create boot disk a system restore is a must. Computer manufacturers now often do not bundle them with a Windows installation disc. In this case, the system recovery rescue disk will help you boot your computer to restore it if it is not possible to boot in another way.

In the "Backup and Restore" window, you must click on the item "Create a system recovery disk" to create rescue disk system recovery. In this case, you will have a rescue CD for system recovery in case of serious problems with the operating system.

After clicking on the item "Create a system recovery disk", the window "Create a recovery disk" opens. To create a system recovery disc, you need to insert an empty CD or DVD disc into the optical disc drive, and then click on the "Create disc" button.

Next comes the process of creating a system recovery disk. After completing the creation of the emergency recovery disk, you need to click on the "OK" button. emergency disk Windows recovery 7 takes up about 150 MB.

You will now be able to access system recovery options using a bootable recovery disk if it is not possible to boot your computer using other methods.

To boot your computer from a rescue or installation disk, you will need to select BIOS priority boot from a CD/DVD drive, and if using bootable flash drive With USB disk, to which such a bootable USB flash drive is connected.

If, when creating a recovery disc, you are prompted to insert an installation disc with the Windows 7 operating system, this means that the necessary files to create a system recovery disc were not found. In this case, you will need to insert the installation file into the computer's optical drive. DVD disc with Windows 7 operating system.

With the help of the installation Windows disk 7 or the System Recovery Disk, you will be able to boot into your computer and have access to all operating system recovery options.

Creating a system image

If you select the “Creating a system image” item in the “Backup and restore” window, then a system image will be created for restoring it, which includes copies of the disks necessary for the operation of the Windows operating system. You can include additional disks in the system image and use it for recovery in case of problems. However, you cannot use individual elements recovery.

In the System Image Creation window, you will need to select a location to store the backup.

In the System Image Creation window, you will need to select the drives that you want to include in the backup. In this case, it will not be possible to add the disk on which the backup will be saved. Then click on the "Next" button.

In the new System Image Creation window, you will need to confirm the backup options and backup location. After that, click on the "Archive" button.

Archiving in Windows 7

Now let's move on to the archiving and backup settings. In the "Backup and restore files" window, you need to click on the "Set up backup" item.

Next, the Backup Settings window opens. You will have to wait for some time while the data backup starts. You will see the inscription “Starting data archiving” in the window, while archiving itself is not yet taking place.

Then the Backup Settings window opens. In this window, you must select a location to store the backup copy of the archive.

The best option for storing the system backup you create is external hard disk. Because if you back up on another section of the hard disk of your computer, then in the event that it fails HDD, then the operating system, your data and the backups created for recovery will be forever lost. The data, at the same time, is physically located on the same hard disk, they are only located on different logical disks.

In this image, you can see that the system itself prompted me for a storage location - an external hard drive, with enough space to create a backup.

In the Backup Settings window, you will need to select what should be archived.

If given the choice by Windows, the operating system will back up the files stored in standard folders, in Libraries, on the Desktop, and will also create a system image that will allow you to restore your computer in case of problems. All your data and settings will be backed up, and you can restore your system from a backup if necessary.

In this case, it will be possible to select specific drives, select individual folders located on the selected drive. Be sure to check the box next to "Include disk system image: (C:)", so that you have the opportunity, if necessary, to restore the system from the created backup.

The data you select will be backed up according to the schedule unless you start archiving manually. After completing the selection of objects for archiving, you should click on the "Next" button.

In the archiving settings window, you need to check the archiving settings again, and then click on the "Save settings and start archiving" button.

Before starting the backup, you can click on the "Change schedule" link to select your schedule or perform an on-demand backup.

If you do not perform backups on a schedule, but manually when you need it, then you will need to uncheck the box next to the item “Perform backups on a schedule (recommended)”, and then click on the “OK” button.

Next, you will need to start archiving. The time it takes to create a backup will depend on the size of the disks and files to be backed up, as well as the power of your computer. A backup that is run again will be faster because only files that have changed since the previous backup will be overwritten.

Keep in mind that if you set up a scheduled backup, the external hard drive must be connected to your computer at that time. If you will be backing up without a specific schedule, then the best option would be to backup about once a month. In this case, you will save the system settings that you made relatively recently.

Important data that you change frequently will need to be backed up more than once a month to always have an up-to-date backup for recovery.

How to disable archiving in Windows 7

Sometimes, it may be necessary to disable archiving, if you have set up scheduled backups, and the disk where you save the backups runs out of free space. In this case, you will need to disable scheduled backups.

To do this, you will need to enter the Start menu => Control Panel => Administrative Tools => Services. In the "Services" window, you need to find the item "Backup Engine Service (WBENGINE Service is used to perform backup and restore operations)".

To disable automatic archiving you need to change the startup type of the service from "Automatic" to "Manual". For this, you need to click right click click on the item "Automatically and select in context menu item "Properties".

In the "Properties: Block Level Backup Service" window that opens, in the "General" tab, in the "Startup type" item, select "Manual" and click the "OK" button. Next, you will need to restart your computer. Now you can start the backup manually at your discretion.

If you are annoyed from time to time by messages about the need to configure archiving from the Notification Panel (tray), then such messages can be turned off. To do this, go to the Start menu => Control Panel => Action Center. In the "Action Center" window, in the "Maintenance" field, in the "Archiving settings" item, click on the link "Do not receive more messages on the topic: "about Windows archiving"".

Article Conclusions

Using the built-in operating system tool - Windows 7 backup, you can backup Windows copy, the entire contents of your hard drive, or make copies of individual drives, files, and folders.

In the event of a serious failure of your computer, you will be able to restore the system and all your data from a backup. Archiving allows you to make backups not only manually, but also according to the schedule you choose.

Backup in Windows 7 (video)

Not all users know that a full backup of the Windows 7 operating system is possible, which can greatly help in case of computer failures, virus infections, etc. While the Seven is working fine, it is advisable to use this convenient Windows backup function and provide yourself with a Windows 7 backup.

Of course, Windows also has a system restore function, but this tool sometimes does not allow you to fix the consequences of serious failures or damage by malicious applications, since some files are often simply deleted in the OS, and when Windows recovery these files may not be recoverable.

One of the main advantages of resuscitating the OS from a Windows 7 backup is the simplicity of the procedure compared to reinstalling the system, and besides, you don’t have to reconfigure the operating system for the user, because all the settings and installed apps will be preserved in the restored "Seven". Below are detailed guides How to back up Windows 7.

Why do you need a copy of the system?

The copy that is created is an archival backup of all the information of the owner of the computer and the operating system. From it, an image file of the entire system is formed, which can be written to a disk or any other suitable external media. With the help of the saved image, it will always be possible to quickly restore the computer after OS damage, as well as restore all applications, profiles in computer games, drivers, etc.

Procedure for creating an archive

If the user wondered how to properly make and record a backup copy of the Windows 7 operating system, then you will need to perform several of the following sequential steps:

4. Specify the location where you plan to create a copy of the OS and click "Next";

OS Disc Burning Procedure

You need to take the following few steps:

If system damage occurs, then using the disk, you can boot to restore the computer to working order. First, in the BIOS, you will need to specify the priority for starting the system from the drive.

Setting PC Startup from Optical Drive

It is necessary to carry out the following actions:

If your operating Windows system 7 works pretty well and is stable, why not create a backup of it so that in case of failure you can return everything to its place and restore Windows from a backup.

Let's see how to do it.

Press " Start - Control Panel". In the window that opens, put " View: Small Icons"and click on the item" Backup and restore».

Next, we are prompted to choose the location where the backup files will be stored. We are recommended to save the archive on an external hard drive, but if there is none, then you don’t have to choose much, you need to save them on one of the partitions of your hard drive. I indicated myself local disk(E) and I'm being warned that this partition is located on the same physical drive as the system drive.

Then you can choose what to archive for yourself, or you can give the right to choose directly to the operating system itself. We are advised to provide Windows selection, I also recommend this, so in the next window we select the appropriate item and click " Further».

A window pops up in which we are offered to check the archiving parameters again. Please pay attention to the item "Schedule", where it is established that archiving will be carried out every Sunday at 19.00. This means that at the specified time, the archive will be updated with changes that have occurred with the operating system during the week.

If you want to change something, then click on the link " Change schedule» and in the next window specify the day and time when you want the backup to be performed.