Windows

Standalone windows vista update installer. The endless search for Windows Vista updates

Some users 7 Windows versions faced with the problems of the standard Update Center operating system. Windows 7 searches endlessly for updates, fails to download them, and keeps looking for more.

Such a problem can cause a lot of trouble. Firstly, the latest patches will not be installed on your computer, which can reduce work efficiency OS. Secondly, while the search is on, processor and physical memory are heavily loaded. This may not be very noticeable on powerful PCs, but on “weak” ones it is very unpleasant. This article describes what to do if Windows Update 7 cannot complete the search for updates.

Setting up automatic search

Firstly, you need to completely disable windows update, loading the operating system, as it goes on indefinitely. Subsequently, you can fix the problem and activate it back, if you like. But even without Windows updates still works stable. Many users disable them on purpose and experience no problems.

You will need to do the following:

After that follows to restart a computer to stop searching. Now your system will not try to look for new updates. If you need to enable this feature, you can do it in the same menu.

Stopping the service

In some cases, the method described above may not work. For example, when you try to reboot, the computer will take a long time to download and install some kind of patch. And after turning it off and on manually, all settings will return to the initial state. And accordingly, the endless search will begin again Windows updates 7. To fix a similar problem, you need to completely disable the service in charge of work Update Center.

After these steps, the search for updates will be completed. To run it, you need to reset the service configurations to their original state.

In some cases, stopping the service and restarting it may solve the problem. Try this before resorting to more complicated methods if the computer is looking for new patches for a long time.

Correcting errors in system files

Often these problems result from damage to important system files. This may occur as a result system failures, actions of virus programs, incorrect installation previous updates etc.

On Windows there is special utility , with which you can automatically find and fix such errors. It does not have a graphical interface, so users need to launch the system command line to work with it.

This is done in the following way:

If you would like to copy given line, you need to use context menu by clicking right click mouse inside the window. The Ctrl + V combination in the console does not work.

Thereafter Windows will scan everything system files . All found errors will be corrected. After that, you should restart your computer and start searching for updates again. If the process is still too slow- needs to be searched other ways to solve the problem.

Microsoft released special update for their operating systems, fixing Windows Update, which is endlessly looking for updates. The download links are on the official website of the developer, so you can download the patch without resorting to the services Update Center.

For owners 32-bit version Windows - https://www.microsoft.com/en-us/download/details.aspx?id=49542
For Windows with 64 bit architecture - https://www.microsoft.com/en-us/download/details.aspx?id=49540

You need choose the interface language of your OS and click on the red Download button. Further simply run the downloaded file, wait for the installation to finish and restart your computer. In most cases, this patch solves all the problems that arise.

Updates KB3020369 and KB3172605

If the previous solution did not help, then you should update the seven by installing two more updates, restarting the computer between their installations. This method was suggested by several of our readers at once and it really helps a lot.

Troubleshooter from Microsoft

Another way to solve the problem is to use the Microsoft troubleshooting tool. Its action is somewhat similar to "sfc / scannow", with the difference that it was created specifically for Update Center and can make a big difference large quantity malfunctions. Besides, she has GUI , which makes it easier for users who are not used to using the console.

Do the following:

Wait for the operating system scan to complete. If the utility detects any problems, it will notify you and automatically apply the fixes.

We hope this article helped eliminate the endless search for updates to the seventh version of Windows, significantly speeding up your computer and making it much more stable.

Method One - Restarting the Windows Update Service

If after the manipulation the problem remains, then proceed to the next solution.

Method two - a recommendation from Microsoft to solve the problem of a long search for updates

Open the menu Start, enter the text in the search bar there "Windows Update". An item of the same name will appear a little higher - click it.
In the Windows Update window, click on the inscription "Settings", which is located on the left side of the window.
In the settings block under the name Important updates select the item under the name from the drop-down menu "Don't check for updates..." and press the button OK, which is located at the bottom of this window.
Next, restart your computer.
After restarting the PC, you need to download updates in the form of files from the official website of Microsoft, the developer of Windows. After downloading, you need to run and install them.
Update options exist for both x86 bit Windows and x64. Download the ones that match the bit depth of your Windows 7. If you do not know the bit depth of your system, then the article will help you with this.

And here are the files themselves:
- For x64 (64 bit) version of Windows 7: update file KB3020369 and KB3172605
- For x86 (32 bit) version of Windows 7: update file KB3020369 and KB3172605
Install the update with the alphanumeric index KB3020369 first, and after KB3172605.

Note: Don't worry if an error pops up when installing any of the above updates, it just means that it was installed earlier.

After the updates are installed, restart your computer again.
Now you need to repeat the first step and the second step this manual, and then you need to enable downloading and installing updates. To do this, in the update settings window in the block under the name Important updates must be selected from the drop-down menu "Install updates automatically" and press OK to save the setting.
It remains only to wait for the download and installation of updates. If earlier the system was only reinstalled, then it is necessary to wait a long time - up to a day.

If, after the lapse of time, nothing has changed and the problem with the “eternal” search has not disappeared, then proceed to the next solution.

Method three - use the standalone update installer for Windows 7

This method is based on installing updates from a specially created package. official updates for Windows 7.

A third-party developer downloaded most of the updates from the official Microsoft website and made a special installer that, at startup, checks the system for missing updates and installs them.

After that, the problem with the constant search for updates in Windows 7 will be resolved, all subsequent updates will be installed through Windows Update, as it was before.

As we can see, there are many actionable solutions, one of which will definitely return the functionality Windows Update on your Windows 7 installation.

One of the most unsuccessful, one might say, failed operating systems turned out to be Windows Vista. From the first days of its release and after a long time, it has earned a reputation as the most buggy OS. Subsequently, of course, SP1 and SP2 were released, modified with bug fixes and vulnerabilities. But the initial effect it produced did not pass by. Users who once heard about the unsuccessful and buggy Vista avoided it, and the “lucky ones” who dared to upgrade to it from XP very quickly returned back, literally hating, by the way, a very beautiful operating system.

After the release of SP2 and provided that it is installed on a computer with system requirements more sufficient for Vista - this is a 2-core processor, random access memory 2 GB and above, a video card of at least 512 MB Vista worked just fine. But no one paid any attention to this, by that time the "seven" was in full swing winning the hearts and minds, which was nothing more than a modified and corrected Vista. But no one paid any attention to that either. The effect of the first appearance and the first failures gave their own, "Vista" was overboard. But there are still users who have appreciated the product and still use this OS. This is somewhere around 1.5% of all users in the world.

What to do if Windows Vista does not find updates

Microsoft officially ended support for Windows Vista back in 2012, 2 years before the end of support for XP. But after that time, a few minor patches were still released. And in 2017, in April, any support was completely stopped, in general. This applies not only automatic update through the Update Center, but also user support. In this regard, the system unsuccessfully tries to find files to download and install on the network, launching a long search for Windows Vista updates, but does not find it. An endless search starts.

At reinstalling Windows Vista, now after officially deprecating security packages previously released, users will have to download and install manually on the Microsoft website in the "Support" - "Downloads" section. Having previously disabled the search and installation of security patches in the settings, so as not to torment the machine without success, as the system starts the eternal search for Windows Vista updates.

Many users often encounter update problems in Windows 7. The system constantly displays a message that it is looking for updates, but does not find anything.

There is one solution to this problem. It is enough to manually download and install just one package from Microsoft that will fix this error. Consider why windows 7 update does not find updates.

For quite some time now, Windows 7 Update has been causing serious problems for its users. Unfortunately, I myself belong to the group that, in its own skin, has problems with the center on the "seven". On one of my computers, every time I try, the search ends up with an endless message "Looking for an update ...". At first I assumed that the system was looking for updates for a long time, but when I left the computer on for the night, this did not bring the desired result. What to do if Windows 7 Update is not working properly?

It turned out that this problem can be solved quite easily. Of course, I do not guarantee that the proposed method will solve the problems for absolutely all users, but for me it was instantly solved manually - by installing the KB3172605 package and performing several others simple actions. Here's what you need to do to fix the problem.

Step 1: Download the update for your system (but don't install it)

The first step is to download the KB3172605 package directly from the Microsoft website using a web browser. You can find direct links below for 32-bit and 64-bit versions.

You need to download the package, but don't install it yet - that's what we'll do in step 4. There are two simple steps to follow first.

Important! If in the fourth step you encounter a problem installing the above package (for example, a message about system incompatibility is displayed on the screen), then instead of the above, you need to download the KB3020369 package from the links below. But only do this if the above updates don't work.

Step 2: Disable internet access

Downloaded files should be installed when the Internet is turned off. If you are using Wi-Fi, then click on the icon wireless network in the notification area (lower right corner of the screen) and turn off the connection. If you are connected to the Internet using network cable, then you can disconnect it from the computer.

Alternatively, right-click on the network icon, select Network and Sharing Center public access", then go to the "Change adapter settings" tab and disable network card with which you connect to the Internet.

Step 3: Stop the Windows Update Service

After disconnecting from the Internet, we need to stop the Windows Update service. To do this, press the combination Windows keys+ R, enter the following command in the Run window that appears and confirm its execution by pressing Enter:

services.msc

The System Services window opens. Find the Windows Update service in the list, and then right-click on it and select Stop. Make sure the service is stopped and then close this window.

Step 4: Install KB3172605 (or KB3020369)

Only now will you be able to install the previously downloaded KB3172605 file for your system. Run the installer file and confirm the installation.

If you get an error that the update is not compatible with your operating system, make sure you download the correct version for your system (32-bit or 64-bit). If it still gives an error, use the alternative package from the first step.

After installation, you will be prompted to restart your computer. Confirm and wait while the update installs and the operating system loads.

After booting the system, connect to the Internet and enable the Windows Update service (right-click on it and select "Start").

Now go to the Windows Update window (for example, using search string in the Start menu) and then click on the search for updates button.

After about 5-10 minutes, a list of updates available for installation will open. In my case, the search went on for several minutes and thus finally solved the Windows Update endless search issue.

Windows 7 update without Windows Update

Sometimes Windows Update 7 does not download updates, especially when there are a lot of them. Most often this happens after reinstalling the system - we installed a fresh operating system and suddenly the center displays a message stating that several hundred updates are available for installation. Just downloading them one by one takes a lot of time, not to mention installing them. This is often problematic and ends up with a message about restoring the previous settings of the computer, since so many updates cannot be installed (the solution is to install them in small batches).

Fortunately, Microsoft after several years decided to do something about this problem, due to the fact that many users do not properly update the "seven" to latest version. The company decided to list the rollup packages for download on the Microsoft Catalog site. The packages are constantly updated and are currently available for 32 and 64 bit versions of Windows 7 and 64 bit Windows Server 2008R2.

The huge advantage of this packaging is that we don't have to download hundreds of individual packages via windows center update.
In order to install them, the "seven" must include:

Service Pack 1 (SP1) installed
KB3020369 since April 2015

When these conditions are met, we can download a rollup that will update our system to the latest version in one click. To do this, go to the following link using Internet browser Explorer (unfortunately, the following page only works under IE):

Download Cumulative Update for Windows 7 / Server 2008

When you enter the site, a list of found updates will be displayed. Three will be available for download:

for Windows 7 (32-bit version only);
for Win 7 computers based on x64 processors (64-bit only);
for Windows Server 2008 R2 x64 (64-bit only).

Download the package that matches the bitness of your Windows and install it as standard by running setup file. The rollup package requires a minimum of 4 GB of free disk space.

Dear Admin! Don't waste your time on comments like
from Andrey, He himself did not understand what he wrote ...
My Windows 7 Ultimate x64 system worked like clockwork until May 2016,
It has two virtual machines installed, and since May there have been problems:
svchost process loaded CPU 50%-70% and RAM load up to 3000 MB
A lot of things have been tried, I installed Six in VirtualBox! Sevens
different, but the symptoms were the same for everyone and did not work for everyone
"Update Center". On long-established ones, it broke down as a result
automatic installation and then removal of the upgrade program to
Windows 10. And on freshly installed ones, they might not work for a reason
not a "fresh" distribution, i.e. Windows 7 must be some
specific build...

Thank you very much for the article, it gave direction to the search
solutions and collected a lot of good comments. Thanks to everything
material I managed to defeat svchost, about him on
there are a lot of latitudes, but it turns out that this process is tied up to
15 services and one of them wuauserv from the netsvcs group is the center
operating system updates. OS trying to update drove
itself before the emergency shutdown due to overheating, this is darkness ...

Works on this topic:

Install Microsoft updates on your OS manually
all that fix the work of "Windows Update"
Depending on the bitness of your operating system
x86(32-bit) or x64(64-bit).

December 2015
Windows6.1-KB3102810-x64
https://www.microsoft.com/en-us/download/details.aspx?id=49540
Windows6.1-KB3102810-x86
https://www.microsoft.com/ru-RU/download/details.aspx?id=49542

February 2016
Windows6.1-KB3135445-x64
https://www.microsoft.com/ru-RU/download/details.aspx?id=50797
Windows6.1-KB3135445-x86
https://www.microsoft.com/ru-RU/download/details.aspx?id=50793

User action algorithm:

1. Download all four updates for your system without changing
Microsoft site English.
2.In "Windows Update" enable the option:
"Do not check for updates (not recommended)" restart
computer.
3.Install updates, all four. Restart computer after
installing each update.
4. Start searching for updates manually.

After installing the updates found (On the freshest, a couple of hundred)
enable the option in "Windows Update":
"Install updates automatically (recommended)"

It's best to work with this
UpdatePack7R2 for Windows 7 SP1
Install this package https://update7.simplix.info/
Before installation, go to services and disable the center service
updates
(this is not necessary, just the process will go faster)
The package is designed to integrate updates into distributions
Windows 7 SP1 x86-x64 and Server 2008 R2 SP1 x64 and their
installations on working system. The installer works with any
edition of these operating systems, of any bit depth and on any
language.
The system must have at least 10 GB of free space on the hard drive
and preferably at least 1 GB of free RAM.
The priority of this package is that it not only fixes the functions
Windows Update 7, but also installs everything on the system
necessary updates. At the same time, there is no traffic consumption, you can partially
update without internet.
In my system, which worked normally until May 2016, 32
updates and after configuring the Update Center loaded and
installed for the period from 23 to 29 September 202 updates for
Windows and other software from Microsoft.
On a freshly installed system, the installer installs 219
updates in batches: 80 reboot, 80 reboot, 59
reboot and after starting the Update Center instantly finds
30-40 updates for Windows 7 and other software from Microsoft.
The screen went black while the update installer was running.
only the program window showing the update installation process
You should not be afraid of this.

The main thing after the work done is the problem of the svchost process and
CPU load (PC processor) is solved up to 1-3%
The operating system runs quietly and effortlessly without
tear -:))

Why did my computer freeze when installing updates from Microsoft
in automatic mode after installing all repair updates,
and restoring the functionality of Windows Update?

Windows 7 Ultimate x64 was stuck installing the update:
"Security update for Microsoft OneNote 2010(KB3114885)
32-bit edition"
(two hours the system installed it without result)
Error: Code 8024001E
Finding error details:
https://support.microsoft.com/en-us/kb/3114885
This security update resolves vulnerabilities in
Microsoft Office that enable remote execution
code if the user opens a specially crafted file
office. additional information see bulletin for these vulnerabilities
Microsoft Security MS16-099.

Note.
To install this security update, you must have
version of Service Pack 2 installed on the computer for
Office 2010.

Full list versions of software vulnerabilities
Microsoft Office, see Microsoft Knowledge Base articles KB3177451.

The offline update package is available from the Download Center
Microsoft.
On the download page to install the update, follow
installation instructions.

Download the security update for 32-bit version
OneNote 2010 KB3114885
Download the security update for 64-bit version
OneNote 2010 KB3114885

Found, downloaded, installed manually and the process went ...

Systems that were not updated and the svchost process loaded
CPU=50%-75%-100%; RAM=2655-3250MB

Windows 7 Ultimate x64 Real PC works fine:
CPU=1-3% RAM=1450MB

https://update7.simplix.info/)

Windows 7 Professional x32 Virtual works fine:
CPU=1-3% RAM=468MB
(Applied UpdatePack7R2 Update Pack
https://update7.simplix.info/)

Windows 7 Ultimate x32 Virtual works fine:
CPU=1-3% RAM=545MB
(Installed in turn

Windows6.1-KB3020369-x86;

Windows Embedded POSReady 7 x32 Wirth works fine:
CPU=1-3% RAM=548MB
(Installed in turn
Windows6.1-KB3102810-x86 check-updated, broken
Windows6.1-KB3135445-x86 test - no results

Windows6.1-KB3172605-x86 check-updated, working)

Windows Embedded Standard 7 Full x32 works fine:
CPU=1-3% RAM=535MB
(I installed everything at once
Windows6.1-KB3020369-x86 installation

Windows Embedded Standard 7 Thin x32 works fine:
CPU=1-3% RAM=297MB
(I installed everything at once
Windows6.1-KB3020369-x86;
Windows6.1-KB3102810-x86 installation, reboot
Windows6.1-KB3135445-x86 installation, reboot
Windows6.1-KB3172605-x86 installation, reboot)

Windows Thin PC x32 Virtual works fine:
CPU=0-2% RAM=492MB
(I installed everything at once
Windows6.1-KB3102810-x86 installation, reboot
Windows6.1-KB3135445-x86 installation, reboot
Windows6.1-KB3020369-x86 installation
Windows6.1-KB3172605-x86 installation, reboot)

Outcome: Seven operating systems succeeded in completely correcting, six
of which Windows 7 32-bit freshly installed in May 2016 at Oracle
VM VirtualBox on Windows 7 Ultimate 64-bit, which works fine
worked until May 2016 and had to be fixed first…
The value of CPU, RAM when the system is idle 95-98%

Thanks for the great article!!!