The work of the web company has been discontinued. Why does Internet Explorer stop working?

Every person more or less familiar with a computer is constantly faced with a program called "Explorer". This thing is necessary and useful. True, very often you can observe unforeseen failures in the operation of this application. Why does Windows Explorer, to put it mildly, crash? This can be a one-time or permanent shutdown, and it usually happens at the most inopportune moment. There could be many reasons for this.

What is Windows Explorer

The program itself is an integral part of any "OS" of the Windows family. This is her, so to speak, a standard component. In terms of computer terminology, Windows Explorer is a file manager.

Simply put, this is a tool for viewing and managing files and folders located on a computer, including HDD(hard drive), logical partitions and removable media such as optical drives, USB devices or removable memory cards.

Purpose and main functions

Probably no need to explain that in the "Explorer" you can open files or perform various standard operations such as copying, cutting, deleting files and folders. That's not the point. The fact is that this application has a lot of functions that are available when you call the drop-down context menu, which is called by clicking on a file or directory right click manipulator (mouse).

It is here that you can see what the possibilities of the program are. All menus of this type are standard. For example, "Explorer" Windows 8 is practically no different from previous versions, with a few exceptions. The menu itself provides tools for opening files using the selection desired program, quick check installed antivirus, viewing information about a file or folder, etc. Actually, the same Windows 7 "Explorer" has a similar set of commands and functions. Although the "seven" is enough stable system, however, no user is immune from this failure. If you are a user of one of the indicated operating systems, then you are probably familiar with a similar message that appears hourly on the screen: "Windows Explorer has stopped working."

After that the system hangs. Sometimes it may take a few minutes to recover, but in some cases you even have to restart your computer terminal to start over. And if the user had unsaved data at that moment? It's a shame to spend a lot of time, and then do everything again. Let's try to solve the problem based on the Windows 7 File Explorer application. Why? Yes, simply because this "OS" is the most common today.

Why does Windows Explorer stop working?

Reasons for crashing this application there may be a lot. The most common situations are related to the presence of virus programs in the system or the incompatibility of any installed applications with the operating system itself. There are, of course, also the reasons connected with system errors. They will be discussed a little later.

Basic Error Correction Methods

So, the user receives a message stating that Windows 7 Explorer has stopped working. What to do? First of all, don't panic. There are plenty of error correction methods. Among the simplest options are standard ways performed using Windows Tools or third party utilities. Another thing is when intervention is required at the level system resources and components. This, of course, is more difficult, but if you wish, you can cope with it.

Virus check

First of all, you need to run a virus and malware scan. Please note that it is better not to use the scanner installed in the system by default. Apparently, he already missed the threat.

In this case, portable versions of anti-virus scanners such as Dr.Web, Eset NOD32, Kaspersky, Norton, etc. will come in handy. But the launched program must be different from the one that is present in the system. That is, if Eset NOD 32 is installed in the system, then from portable version NOD will not make any sense. It is not recommended to install a second antivirus into the system, as there may be a conflict between the antivirus packages themselves. People say: this is the same as locking Stalin and Hitler in the same room.

If the virus is found and removed, a system restart will be required, after which it will be possible to see if the problem persists. If the error occurs again and again, go to the next step.

Safe mode

Now a few words about safe mode. It is just created in order to correct errors in the system. The fact is that when the system is booted using this function, only the most basic functions are performed. system elements"OSes". It is generally possible to boot a computer terminal without driver support. It is very likely that some of them may cause system errors, but this is usually quite rare.

After starting the system (pressing the F8 key at startup), you need to test Windows Explorer. If everything works without failures and errors, then the problem lies precisely in installed programs products.

Disabling the context menu

Sometimes a problem in the Windows Explorer program can occur precisely because of the incompatibility of some programs that embed their own commands in the main or context menu file manager. They will need to be disabled. This will require a small utility called ShellExView. It is distributed completely free of charge. In addition, you can find a crack for this application on the Internet. True, it will require installation on a hard drive, since there is no portable version for this program.

After installation, at the first start, the main window will appear, in which all command elements will be displayed. It is necessary to sort the elements by type by clicking on the corresponding “Type” field at the top. Now we need to look at the commands that are assigned the type "Context Menu". Now you will need to deactivate absolutely all items that are not manufactured by Microsoft Corporation. Do not be surprised, sometimes you have to disable Intel services, archiver commands, etc. There is nothing wrong with that. In principle, you can also use a quick shutdown using the F7 function key.

After completing these steps, you will again need to reboot the system, followed by testing the problem. In some cases, this method is quite effective.

Using the msconfig command

This command is universal for most cases where you need to fine tuning systems. In this case, we are interested in autorun programs and background services. This command is called from the "Run" menu field.

After the command is started, selective launch is selected in the "General" section (tab). The loading of system services remains enabled, but the box "Load startup items" must be unchecked.

After that, you need to use the "Services" tab, in which select the "Do not display Microsoft services". Now you can try pressing the "Disable all" button and agree to the offer to restart the computer.

After a new start, we again call the msconfig command. Now you can enable services (preferably one at a time) followed by a reboot. As soon as a problem appears, it will already be possible to say exactly which service affects the appearance unexpected error. In the future, it can simply not be used. On the other hand, the problem can occur again and again, so it is highly recommended to test all services. Of course, this will take a lot of time, but it will be possible to determine with certainty the component that affects the crash of the Explorer.

Restoring system files

In some cases, a so-called restoration may be required. system files, since a violation in their work can lead not only to errors in the Windows Explorer program, but also to the inability of the system to self-heal even with the determination of the last checkpoint. Windows OS may give messages that the hard drive needs to be checked for errors, although this is absolutely not the problem itself. However, the same question, how to fix Windows 7 Explorer, can be solved in this way.

In order to start the process of scanning and restoring system files, you need to have Administrator rights, this is required condition. For example, in Windows 7, this uses the menu sequence "Start" / "All Programs" / "Accessories" / " Command line". If the user is not logged in as Administrator, there is a way out. By right-clicking on the command, you need to select the sub-item "Run as Administrator" (if necessary, you will need to enter a password).

Now in the window that appears, enter system command sfc/scannow and press the Enter key. Within a few minutes, the system will check for problems and issue a recovery message (if errors were still present).

Outcome

In general, the most common methods for restoring the performance of Windows Explorer are described here. As a rule, in most cases, all these methods (singly or in combination with each other) are very effective.

If all else fails, you can turn to the Microsoft forums and look for a description of the problem and how to fix it. In extreme cases, you can try to reinstall the "OS", but not over old version, and after full formatting hard drive. This is only due to the fact that when reinstalling the new OS, it may inherit the errors of the old one, and you will not achieve the desired result.

However, as already mentioned, this approach can be used only as a last resort, because it is clear that each user has a lot of information stored on their hard drive, many programs are installed, etc. Before reinstalling, the necessary files will have to be copied to some removable media to avoid information loss. But the programs will have to be reinstalled manually.

If File Explorer automatically closes or restarts, then the reason for this behavior is usually an incompatibility of one of the installed programs in your operating system. However, there may be other reasons - in particular, damage to system files. Let's see what to do if the message "Explorer has stopped working" appears on the screen.

Before you start following the recommendations below, start your system in safe mode.

If Explorer works here, then the problem lies in the incompatibility of one of the installed programs. If an error appears in safe mode, then immediately proceed to the last section of the article - restoring system files.

Virus check

If Explorer quits on its own, then the first step is to check your computer for viruses. It is advisable to do this with the help of several free utilities from different manufacturers:

Scan your computer with all three utilities and destroy the detected threats. This may take a lot of time, but in this way you will completely eliminate the possibility of a virus infection and, with a clear conscience, you can proceed to check other possible reasons for Windows Explorer to stop working.

Disabling context menu components

Sometimes an error in the work of the Explorer is not caused by malicious code, a common applications third-party developer, which are built into the context menu. By identifying and disabling this component, you will solve the problem with the program crash.

Find an application that harms the system will help free utility shellexview. You need to work with it as follows:

If Explorer does not crash after reboot, then you need to run the ShellExView utility again and turn on the deactivated applications one by one. It will be easy to find them - in the "Deactivated" column they will have the status "Yes".

Turn on the applications one by one and check how File Explorer works. So you can identify a specific component that affects the operation of the system, and get rid of it.

net boot

If nothing worked out with third-party applications, try to go the other way - look for a problem among startup services and programs. To do this, use the so-called "clean mode":

If Explorer works in clean mode, then try to identify the service that interferes with it during normal boot:

If there is an error, then one of the services you noted is not working correctly.

Check the second half of the services in this way and restart the computer again. Disable services one by one until you find the cause of the problem.

If all services are checked, but the error is not fixed, then proceed to study the startup list. Do the following:

Further, the order is the same - by the method of elimination, try to find a program in autorun that prevents Explorer from working normally. This method requires a lot of time, but if the problem lies in one of the services, then you will definitely identify it and be able to fix it.

Restoring system files

If File Explorer keeps crashing when you start the system in safe mode or clean boot, then the problem is most likely deeper than we initially thought. In this case, it may help standard procedure restore system files. On Windows 7, it is done as follows:

If corrupted files are found during the disk check, the system will try to repair them on its own. If the procedure is successfully completed, the explorer will stop crashing, and you can work safely in the Windows environment.

If none of the described methods helped, try using other recovery tools: roll back the system to a checkpoint, return the laptop to the initial state or use way Windows if it was previously created. You can learn more about recovery tools from our article "". The information it contains is relevant for Windows 7 and Windows 8.1.

Many users began to complain that Steam crashes at startup, the message “Gldriverquery.exe has stopped working” pops up and Steam closes. Initially, this problem has already occurred to users AMD graphics cards, as there were often conflicts with the drivers of this line of video chips. In this article, we will briefly review possible reasons departures in Steam, and below we will give a couple of tips on how to solve the problem.

The error message itself tells us that the video driver software shell has caused a conflict and will be closed. As mentioned above, this is a common problem with AMD video cards. Therefore, if you are the owner of such a card, especially the last 10 years of release, we recommend that you go to the official website of the developer and urgently update the drivers.
However, even on brand new cards from NVIDIA 1060 and 1050, the problem reappears.

How to fix crashes on steam

Let's go over the standard tips in such cases, and if you've done it all, go straight to the second part.

The vcruntime140.dll file is part of the 2015 Microsoft Visual C++ package, and if the package is not installed, there is no file that is causing this conflict.

Fixing "gldriverquery.exe has stopped working"

• Even if you have packages installed, you will have to remove them and restart your PC. They may be from 2015 but cause conflicts.
• Then we go to the official website (for Windows 7.10) or to dlltop.ru - the choice is for all versions of the OS.
• We download packages according to the bitness and version of your x32 or x86 operating system.
• We install.
• Restart your computer and Steam will start.

Conclusion

I hope you figured out why Steam does not start and the error “gldriverquery.exe has stopped working” appears and know how to fix this problem. For users who have difficulty installing Visual C++, we suggest that you familiarize yourself with the video instruction on YouTube. If you have other errors in games, programs or difficulties with the passage - write in the comments below or in our group in contact.

When working with an operating room Windows system the user may experience an unexpected problem, which is the failure of the system explorer. Usually, the disappearance of icons from the desktop is observed, and the inscription “ File Explorer has stopped working". What caused such a nuisance and how to eliminate it?

Finding the cause of a system failure

We note right away that the main cause of this error is the presence of third-party software on the computer, which by its actions affects the correct operation of the system. A common misconception is that windows explorer (this is what the service is called) appears as a result of errors in the OS itself incorrectly, since the system itself cannot influence the behavior of processes during normal startup.

The main reasons for poor performance windows explorer can be called:

• untimely installation of OS updates;
• operation of an outdated or outdated version of the driver for the video card;
• influence malware or a virus on the PC;
• installed applications from an unknown vendor that may cause incorrect operation when launched windows explorer;
• failure in work system registry, which is also a consequence of the influence of third-party software.

How to fix the problem?

Step 1: Scan your computer for malware

If you already have antivirus program, then you should update its databases, and then run a full system scan. Of course, verification can take a long time, however, it's worth it. By the way, if infected programs and suspicious objects are detected, it would be preferable to use their complete removal. At the same time, the antivirus will show the path to each file, so you should independently remove not only these files, but also all components of dangerous software.

Step 2: Update graphics card drivers

Older versions of drivers can significantly affect performance windows explorer, so it is worth updating them in a timely manner.

In order to update the drivers, you need to go to Task Manager and find the link Video adapters. Then we right-click on it and run the driver update. If everything is in order with the drivers, then this item can be skipped, however, to clear your conscience, it is still worth checking the integrity of all system files.

You can learn more about how to check the integrity of files. Keep in mind that if there are corrupted files on your system, troubleshooting may require installation disk With current version OS.

Step 3. Disabling programs from the context menu

If problems with windows explorer continue to annoy you, you should try disabling third-party program components in context menu. This can be done using the utility.

When the program starts, sort the table by type and disable one by one all the elements that are in the line Context menu and are not a product of the company Microsoft. Then we reboot the system and, using the exception method, we detect the program that is causing the crash windows explorer.

The probability of solving the problem with the help of this utility is quite high, however, if the Explorer continues to work incorrectly, then the only correct option would be to reinstall the system itself. This should be done as a last resort, because it is not a fact that on a “clean” Windows, when running one of the previously downloaded utilities, the user will again not encounter problems in work windows explorer.

File Explorer is an application that allows you to use a visual interface to navigate from one partition hard drive to another to search for items. Error terminated work explorer occurs in rare cases and provokes an emergency closure of the application.

Why did File Explorer stop working?

Windows Explorer stops working for several reasons, mainly a separate program provokes such a reaction. At the moment of contacting her as a guide, she is not available and acts as the root of the problem. A malfunction can be expressed in one-time failures, so the conductor knocks out infrequently, then it is rather difficult to determine the source. In other cases, every time the application is opened, an error occurs.

Stops working windows explorer 7 and other versions such malfunctions:

1. Integrated context menu elements;
2. Faulty codecs, mostly video codec;
3. Elements included in the control panel;
4. Rarely, but the reason lies in the video adapter;
5. Sometimes the File Explorer process gets corrupted due to viruses.

Any reason is relevant and can significantly harm the conductor. The breakdown should be diagnosed and eliminated one by one.

File Explorer has stopped working: fixing the context menu

Windows 7 Explorer stopped working, how to fix if the error lies in the context menu? - You should return it to its basic state, that is, remove all secondary applications, most often this will be the answer.

The easiest way to accomplish the task is to use the ShellExView utility. The application shows programs that have a contextual display.

1. In the main menu of the program, sort the parameters by "Type";

1. Find everything that is in the nature of the "Context Menu";
2. Disable all elements in the path that have an asterisk using RMB or F7, except for Microsoft;
3. Reboot and check the result.

If the expected result does not follow, disable other items, but be sure to leave the processes produced by Microsoft, all the rest can be disabled. We'll have to use the selection method to identify and fix the problem.

You can also check that the problem is in minor utilities using safe mode. You can go to it by pressing F8 at startup. In theory, the Windows 7 Explorer has stopped working error should not appear, otherwise you will have to run the sfc agent.

Windows Explorer has stopped working, faulty codecs

The actual question is, the explorer program has stopped working, how to fix it, because codecs are an invisible part of applications? We note right away that most often the problem is in video codecs, thanks to them a thumbnail of the video file is formed and their absence causes a failure. In some cases, other applications provoke an error.

To diagnose whether the problem is in the codecs or not, you should disable the display of thumbnails. You can do it like this:

1. Go to the Control Panel, with this problem it should open;
2. Select the "Folder Options" tile;

1. In the "View" tab, deselect the "Show file icons on thumbnails" option.

The type of problem will immediately become obvious, if, nevertheless, the codecs are faulty, then they should simply be reinstalled, since there are a lot of them on the Internet.

Broken conductor integrity

If the OS has undergone a virus attack or other damage, it may experience changes in the operation of system files. Not necessarily the problem is in the conductor, although there is not much difference. You should just run a special sfc scan.

1. Press Win + R and type cmd;
2. Paste sfc /scannow into the console;

Only the administrator has the rights to execute the procedure.

After checking and eliminating the error in this way, it is still necessary to destroy viruses, they lend themselves well to processing with the help of antiviruses.

Service health diagnostics

Many applications have their own services that sometimes fail. It is necessary to turn off all third-party elements in turn, and then, inevitably, there will be a problematic application. For this you need:

1. Win + R and type msconfig;
2. Go to the "Services" tab;
3. From the bottom, select the item "Do not display system services";

1. You should not disable, at least not primarily, driver services, everything else can be deactivated.

When the root of the problem is determined, you should update the drivers for the application or completely stop using it.

Video adapter driver

The cause of multiple problems, especially those related to the video component, is the video driver. It consists of complex mechanisms, is frequently updated, there are a huge number of adapters and types of drivers - all this causes the risk of failures in the application.

You just need to update the driver, for this:

1. Start and RMB on "Computer";
2. Then select "Properties";
3. Now open "Device Manager";

1. In the "Video adapters" section, select the item with a discrete card;
2. Double click and go to the "Driver" tab;
3. Now select "Update".

An alternative is to use GUI from the driver manufacturer, but it does not always work correctly.

Using one of the proposed approaches, with a high degree of probability, it will be possible to eliminate the error and return the correct processing of the conductor. Quite often, the malfunction is in minor programs, and much less often the cause is in system failures.

If you still have questions on the topic "Fixing the error" Explorer has stopped working "", you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>