Hdd regenerator how to change language. HDD Regenerator: How to use the hard disk recovery software correctly

HDD Regenerator instruction

HDD regenerator is software designed to work with hard drives, namely the recovery of their bad sectors.

This program has the ability to work with hard drives as in the operating Windows system and from under operating system. Run the program on any personal computer, the first thing she will offer us is to create copies of it on a bootable USB flash drive, or on boot disk.

And so we open the menu item "Regeneration" and select "Start process under Windows". In the window that appears, we need to select the hard drive with which we will work.

All must be closed before starting work. active programs, their operation may restrict access to the disk and block the operation of the HDD Regenerator itself.

After the recovery process is completed, the program will show us information about the work done and its results.

Purpose of the program: testing and repair of hard drives.

Let's see what they offer us.

We start the program, select a disk for work. Double clicking on a disk line launches a console window with the actual program.
A DOS-like window opens, somewhat outdated, but it's probably easier to do program updates this way - you have to rewrite less. Select the type of scan. Confirmation of choice - enter.

• Quick search (in the description there is no explanation of what this means, perhaps scanning of certain areas of the disk)
• Full scan with or without recovery

• Scan and restore.
• Scan without recovery.
• Regenerate (do you believe in miracles?) all sectors, even good ones.

And the last menu.

• Proceed.
• Show statistics.
• Change scan boundaries.
• Change scan mode.
• Exit the program.

What is paid in this utility? This becomes clear when she stumbles upon the first bad. One she processes as a demonstration of the possibilities. And on the second bed it displays such an enticing message.

It would be appropriate to compare HDDRegenerator with its competitors, for example with Victoria for windows. An example of how to use it we have a "link". Here we show how it looks and what it can just for comparison.

Getting started with the program.

As for the restoration of sectors, here too full set funds.

Remap- analogue of repair in the Regenerator.

Erase- an analogue of regenerate, yes, it is overwriting, no information will remain in the sector.

If Vitoria seems overloaded, then there is also HDDScan, very handy program and an example of its use is "link".

The principle of operation of the regenerator is that it repeatedly overwrites poorly readable sectors until the disk itself replaces them from the reserve zone. It will simply overwrite soft-bads, and for hardware-bads it will launch the remap procedure provided for by the ATA standard, i.e. nothing supernatural is applied. All these procedures are fatal for data contained in slow-reading sectors.

If you apply this program or any other with a similar purpose on a damaged disk with important data, you must remember that all operations to repair the drive are fatal for the information on it, because. write during operation, which is not allowed in DataRecovery procedures.

But all programs, except hddregenerator "and honestly warn about the danger of data loss. And only the regenerator promises miracles without warning that it actively uses writing to problem sectors and that this can lead to loss of user data.

HDD Regenerator can be used to rid a disk of soft-bad blocks. He will cope with this task. But given that this product is paid, if available free utilities, its use is extremely limited.

Among all possible ways data storage, despite their great variety, the hard disk does not lose its popularity today. Not everyone dares to upload important information to the cloud, no matter how tempting the terms of using the service may seem, external media are also not always suitable for certain tasks, many users prefer to store personal information on internal drives due to the reliability of the devices. At the same time, HDDs are also prone to malfunctions, which in many cases provokes failures in the operation of the operating system installed on the disk, or lack of access to user data. Neither one nor the other options are acceptable, so the issue requires an immediate solution. In the event of a complete failure of the hard drive, everything is easier, it will need to be replaced, but most often users are faced with the problem of bad sectors, which are not readable. To diagnose and restore the hard drive, specialized software is used. One of the most successful software solutions– HDD Regenerator.

Setting up and working with HDD program regenerator.

The HDD Regenerator application is a simple and effective tool for recovering bad sectors and the surface of a magnetic hard disk. The software uses a special surface magnetization reversal algorithm, while the structure of the data recorded on the disk remains the same. Winchester or hard drive Drive, being a mechanical device consisting of several round plates, an electric drive and an information reading / writing head, wears out over time. Disks made of magnetic material on which information is applied rotate at high speed during HDD operation, and the head moves over their surface, performing data processing. In the event that some sections have lost their properties, writing to them becomes impossible, and reading of previously recorded files is not carried out.

The HDD Regenerator program can detect damaged areas on the disk and repair. When uncorrectable sector errors are detected, the task is to reassign the address of the failed memory cell (one of the reserved values ​​is assigned). Thus, writing will not be carried out on bad sectors, which will slightly reduce the size of the hard disk, but also reduce the likelihood of errors. During a deep scan, the software detects and fixes problems with the surface, with the help of HDD Regenerator, a complete regeneration of the surface is performed using the magnetization reversal algorithm. You can also use the application to diagnose digital media (USB flash drives, memory cards, SSDs, etc.).

Main functions of the program

The software differs in that scanning is performed on physical level, which provides interaction with unrecognized, unformatted HDDs and all popular file systems. The media to be recovered retains all existing data. After installing the software, it is possible to create a bootable CD / DVD or flash drive, in order to use it if the operating system cannot be loaded. The developer improves the functionality of the product with each update, latest version HDD Regenerator 2018 offers comprehensive hard drive diagnostics and recovery. The main features of the program are:

• Low-level access for diagnosing the physical surface of the HDD.
• Detection and treatment bad sectors, checking for errors and correcting them automatically.
• Identification of physical damage to the surface of the HDD, elimination of detected problems, regeneration by the remagnetization method.
• Possibility to pause the recovery process if necessary.
• Real-time monitoring of the hard disk status, notification of changes.
• The S.M.A.R.T function allows you to evaluate Current state HDD, operating time, etc.
• HDD Information Display ( General characteristics, temperature, devices, degree of fragmentation, and other data).
• Detailed statistics of performed procedures.
• Create bootable media for use in situations where, due to problems with the HDD, it is impossible to boot the system. When starting from the drive, the program starts and operates in DOS mode.
• Ability to work in a Windows environment, regardless of the OS version (starting with XP).

It is easy to use the program of any version, whether it is HDD Regenerator 2011, 2016-2017 or 2018. You can download the software in conditional free version, but activation is required to use all features. In the presence of license key HDD Regenerator the user will have access to full functionality for an unlimited period. The HDD Regenerator program has a convenient and intuitive interface, not overloaded with numerous submenus and unnecessary elements, the Russian language is supported, the functionality is easy to learn, which allows even an inexperienced user to use the tool.

Installing HDD Regenerator

To take advantage of the software features by running it from a flash drive or in Windows environment, first you need to download the distribution kit and install HDD Regenerator on your computer. The key and crack are in the archive along with the installer. In general, the procedure is similar to installing any other software, so there are no difficulties with this. We perform the following actions:

• Download the program and run the installer.
• The installation wizard will prepare the application for installation, after which we start the procedure by pressing the “Next” button.
• We agree to the terms by marking the desired item, and click "Next".
• By default, the program will be installed to the Program Files folder located on system drive, if desired, the installation path can be changed by specifying a different directory. Click "Next" and wait for the procedure to complete.
• If you check the box "Launch the program", the program will start when you click the "Finish" button. An application icon will also appear on the desktop.

You can run HDD Regenerator directly from the Windows environment or burn it to an external drive to start from it.

How to use HDD Regenerator

Thanks to clear interface, not burdened with many settings, and a convenient navigation system, it is easy to work with the program even without a crack. There are several options for launching the software: from a shortcut on the desktop, from a USB flash drive or an optical disc. Let's take a closer look at how to properly use the HDD Regenerator program. The interface offers several tabs, when you go to each of them, functions are available that allow you to check and restore the hard drive, as well as burn software to media.

The technology allows you to diagnose the HDD, which should be done before the recovery procedure. It is possible that the hard drive is fully functional and the cause of operating system errors or other software problems not at all in it. To do this, go to the S.M.A.R.T section, the program will analyze the state of the HDD and display information about the health of the hard drive. If you see a status other than “OK” in the status, you will need to perform the recovery procedure.

How to recover a hard drive

In the program window, you will see an offer to scan the hard drive, as well as create boot drives. When it comes to troubleshooting a hard drive, there are a few steps that need to be taken. First you need to close all active programs, except for HDD Regenerator, and end the processes. Recovery instructions:

• Go to the “Regeneration” section and select “Start Process under Windows” from the list.
• In the next window, you need to select the hard drive so that HDD Regenerator starts the recovery procedure, then click "Start Process".
• A window will open with user interface based on input text commands from the keyboard and textual output of results. To select the type of scanning and recovery of the disk from the list of available actions, press "2" on the keyboard (Normal scan) and the enter key.
• Now press "1" (Scan and repair) and Enter to check and fix the found bad sectors.
• In a new window, you need to select the starting sector by pressing "1" and the enter key, after which the scanning process for errors will be launched, the progress of which is displayed in the program window. If errors are found during the check, HDD Regenerator will correct them. The process will take some time. Upon completion of the procedure, the user is provided with reporting information on the work performed (the number of bad sectors, fixed and not subject to recovery).

How to burn a flash drive

The program also offers the option to create a bootable USB stick or disk. To carry out the procedure, we connect the USB flash drive to the USB connector on a computer or laptop and perform the following steps:

• In the main window of the HDD Regenerator application, click the "Bootable USB Flash».
• We select the USB flash drive that should be made bootable (if several USB devices are connected to the device, they will be displayed in a list) and click "OK".
• A warning window will appear informing you that all information from the USB drive will be erased, we agree with this by confirming the action with the "OK" button.

At the end of the process, you will have a boot drive where you can copy the program to boot with the possibility of treatment outside the operating system of the computer.

The procedure is similar to the previous one, only to burn a disc, you need to insert a CD / DVD disc into the drive and press the “Bootable CD / DVD” button in the main application window. Next is selected required disk and clicking "OK" starts the process. For application software tools from a bootable drive, be it a USB flash drive or a disk, you need to specify the boot priority from removable media in the BIOS.

Advantages and disadvantages

The HDD Regenerator software solution provides the user with the opportunity to independently deal with the problems that have arisen with the HDD, without resorting to the services of service specialists. Among the advantages of the software:

• Intuitive, user-friendly interface and ease of use (even in English version).
• Russian language support.
• Working in OS Windows any versions since XP and file system independence.
• The ability to work both in the Windows environment and outside it (using a boot drive).
• Recovery of damaged sectors.
• View statistics about recovered hard drive sectors.
• Monitor HDD status in real time.
• Creating a full-fledged boot device from an optical disc or USB flash drive.
• The ability to pause the process of scanning the hard drive, so that later they will return to the procedure.
• Security of the recovery procedure for user data.

The disadvantages include the following points:

• The full version of the product is paid.
• The absence of the Russian interface in the official release.

At the same time, you can also use free version, its functionality is quite enough for basic tasks, and for those who want to use the program with the Russian interface, it will not be difficult to use the crack.

As you can see, there is nothing complicated in working with HDD Regenerator; you don’t need to study the settings in depth. With the help of this software, you can restore the hard drive to working capacity without much effort in just a few clicks, as well as create a bootable drive, which helps a lot in case of force majeure.

The hard drive is not an eternal component computer system. Unfortunately, sooner or later it fails. The reason for this is demagnetization, as a result of which bad sectors appear. But what to do to extend, if not at all hard drive? According to many experts, this will help one simple program, that's what we're talking about today. And to be more precise, the article will tell you how to use HDD Regenerator 1.71, but it’s worth clarifying right away that manual will do and for other versions of the application.

Testing

Since the developers of the program position it as a tool for recovering bad sectors of a hard disk, it would be wise to start an article on the topic “How to use HDD Regenerator” directly from this function. However, it will not be entirely correct to do this, because there can be many reasons for a drive failure. It is for these purposes that software There is a S.M.A.R.T test function. This is one of the most reliable disk diagnostic systems, so it is recommended to use it before proceeding with the "repair" of the drive.

1. Run the program.
2. On the top panel click on the section called S.M.A.R.T.
3. Wait for the diagnostics to finish.

As a result of a rather lengthy analysis, the program will show you the status of the hard drive. If there are no problems with it, then you will see the inscription "OK". If it is different, then you can be sure that the problem lies in bad sectors and you need to use the option to restore them.

Disk Recovery

A guide on how to use 2011, we will continue directly with main feature programs - the ability to restore bad sectors of the hard disk. In fact, this procedure is quite time-consuming, so be patient and don't miss anything.

1. Launch the application.
2. On the top panel, click on the Regeneration section, which translates as "Recovery".
3. In the section menu that appears, select the Start Process under Windows option.
4. Immediately after that, a window will appear in which a list of installed on the computer will be displayed. hard drives. All you need to do at this stage is to select the desired HDD and click the Start Process button.
5. A pseudo-graphical interface window will appear. For some users, working in it is not very comfortable, however, following the instructions, you should not have any problems with this.
6. To start the recovery process, enter the number "2" from the keyboard and press the Enter key.
7. In the next menu, you must press the key with the number "1", and then Enter. Thus, you will start the process of scanning bad sectors with their subsequent recovery.
8. Now you need to specify from which sector you want to check. It is best to check the entire disk, respectively, start from zero. To do this, enter the number "1" in the window and press Enter.

As soon as you complete all the above steps, an indicator of the progress of the restoration work will appear on the screen. It is with its help that you can track how many bad sectors were detected and how many of them were recovered. All that remains to be done is to wait for the scan to complete.

Create a bootable flash drive

From the guide on Regenerator, you already know how to recover bad sectors. This is the main function of the program, however, not the last one. With it, you can create bootable flash drive in order to drop some program on it in the future to run it directly from the drive.

1. Open the program window.
2. Insert a USB flash drive into a port on your computer.
3. From the main menu of the application, click on the Bootable USB Flash button.
4. A new menu will open that will display a list of detected flash drives connected to the computer. Select your flash drive from the list and click OK.
5. A new window will appear, which will say that as a result of the operation, all data from the drive will be erased. Click OK to start the operation.

It doesn't last very long. Immediately after the end, the program will notify you of this, after which you can copy the program to the USB flash drive to run it from the BIOS.

Create a boot disk

The instruction on how to use HDD Regenerator would not be complete if it did not tell you how to create a boot disk. In general, this operation is not much different from the previous one, but for the sake of completeness, we will describe it in detail:

1. Run the program.
2. Insert a CD or DVD into your computer drive.
3. Click Bootable CD/DVD in the main menu.
4. In the list of detected optical drives, select the disc you just inserted and click OK.
5. Wait until the end of the process.

Now you fully know how to use HDD Regenerator. Of course, there are a few more items in the application that have not been discussed, however, they play a mediocre role.

Conclusion

So we figured out how to use the HDD Regenerator program. As you can see, despite the fact that the developers position it as an application for restoring the health of the hard drive, it has other equally useful features. You can easily use it to create a boot disk, USB flash drive or test the drive. In general, the program is very useful and it is recommended to install it on the computer immediately so that at any time there is an opportunity to influence the operation of the computer.

The hard drive is one of the most important elements of a computer. In order to avoid serious problems with the computer, it is necessary to monitor the condition of the hard drive. If you're thinking about checking hard state disk, it is best to do this procedure using the program HDD Regenerator .

HDD Regenerator is unique in that it allows you to recover bad sectors of your hard drive, unlike other programs that simply hide them. The first serious signs of hard drive problems include:

1) Long opening of folders and files;

Stages hard checks disk.

2. For HDD usage Regenerator is best to create a bootable USB flash drive or disk with the program, but the easiest way to start checking is to boot from Windows.

To do this, launch the main program window and open the tab in the upper left corner "Regeneration" , and then select "Start Process under Windows" .

3. In chapter "Choose Drive to Process" select the drive that will be scanned and repaired, and then click the small item Start Process .

4. The program will warn you that in order to start the scan, you must close all programs running on the computer. Close as many programs as possible, if possible.

5. A black window will appear in which control is not carried out by the mouse, but exclusively by the keyboard. First, let's do a normal scan, in which you can choose whether to repair bad sectors or not. This option is under item number 2 , so type that number on your keyboard and press the Enter key.

6. In the next step, the program will prompt you to choose whether you are going to restore bad sectors or if you want to limit yourself to checking with a report. By selecting the number 1, the program will start checking for errors, followed by correction, the second item will only perform a check.

7. Monitor the progress of the process. The bottom of the window will display the completed process, the number of bad sectors found and the number of fixed sectors.

8. Once HDD process Regenerator will be finished, the program will display a detailed report on the number of errors found and fixed.

Separately, I would like to note the item "Delays detected", which denotes a delay. If the number in this item is too high, then, most likely, the disk check was carried out very long time. This indicates that the hard drive is worn out and damaged. In this regard, it is more expedient to replace it.

Conclusion. Of course, HDD Regenerator is not a 100% solution for everyone. As far as possible, the program can help with the recovery of bad sectors, but if the disk is excessively damaged, then the program is already powerless.