Computer

Windows 8 does not see DVD. Checking the Wireless Network Status in the Management Console

Many users who switched to the eight from earlier Windows versions, faced with the problem of detecting their own Wi-Fi network. The problem exists and it was even covered on the official Microsoft website. If your wireless adapter sees all other networks, except for the desired one, then we read the text below. Restoring performance is no more difficult than installing a trunk on your SUV. Excellent FastClick installation technology, which is used on the Thule Touring 200 model. This is a patented fastening system with special handles, thanks to which the operation can be done with one hand.

If you are using USB wifi adapter on another PC, then the first step is to reinstall it. Remove from the system and reinstall.

SECOND STEP:

Check the operation of the wireless adapter driver on the "eight". If you just installed Windows 8, then the driver may not work correctly. You can do this through Device Manager. To enter it, move the cursor all the way to the right so that an additional menu appears. Choose there Search. And already in search line dial Device Manager. We are looking for a line in it « Network adapters» and carefully check that they are all working (no exclamation points). You can try turning the adapter on and off ( right click mice):

Right click on the wireless adapter and select "Disable", then click again and select "Turn on"

THIRD STEP:

You need to change the channel on which the Wi-Fi broadcasts. How to do it? If you have a router / modem, then you need to go to the settings through the web interface (in the browser, type 192.168.1.1 or 192.168.0.1 - depending on the model). We are looking for wifi settings(in Russian they write "Wireless Network". There we look for the line "Channel" or "Wireless Channel":

It is better to set either the FIRST or THIRD channel:

FOURTH STEP:

Check if standards match wireless communication on the modem and on the computer!. Standards wireless network there are 802.11a, 802.11b and 802.11g and 802.11n. The latest and most modern of them is compatible with all the previous ones, but not vice versa. Those. if your adapter on the eight works in 802.11g mode, and the modem is 802.11n, then you will not be able to connect.

HOW TO CHECK WHAT STANDARD IS ON THE MODEM AND ADAPTER IN THE COMPUTER?

ON MODEM: We go to the settings through the browser at 192.168.1.1 (192.168.0.1 - depending on the model). All routers / modems have such a category as "Device Information" or "Device Info". There is usually information about WiFi connection, where the standard is indicated:

ON LAPTOP: Often, the Wi-Fi standard is written on the laptop itself (on a sticker that lists the characteristics of the machine). You can Google the name of your laptop and see the specifications on the manufacturer's website. Here is an example of a Sony Vaio with the specifications listed on the sony.ru website:

Also, the standard of your adapter can be viewed using the program Everest.

The main problem with newer operating systems is that they may often not see plug-ins. Windows 8 does not see the phone via usb - a popular request on the Internet. Is this really so, are many people really unable to deal with such a problem? Yes and this manual will help you get rid of this misunderstanding as soon as possible.

Windows 8 does not see the phone - solution

Since the network is more often looking for a solution to the problem for Android phones, we decided to create an appropriate guide. You need to immediately understand if your computer has seen the connection of the phone before. If earlier the mobile worked normally with the PC, then it could be a virus. Where did he come from? He can get through Mobile Internet as well as through the computer itself.

If the device is completely new, then it is worth updating the operating system or installing MTP (Media Transfer Protocol). This should be done on the official website of the program, so as not to pick up viruses and prohibited programs. Next, download the driver for your operating system and use it.

Windows 8 does not see iphone for several reasons:

The dissimilarity of the operating systems of the computer and phone;
Lack of certain programs on one of the devices, drivers;
If the phone is locked with graphic key, then it must be unlocked, otherwise the PC simply will not see the connected device;
If the phone does not alert you that it is connected to a PC, then the problem is in the wire or jack itself. Perhaps it is damaged, this may be even if the mobile phone is brand new.

Also keep in mind that if a notification has arrived on your phone, that's not all. You need to click on it and a window will open in which you can select the mode of using the USB. You can transfer only pictures and photos, charge your phone or mark all kinds of formats at once. Often, charging is chosen there, which does not allow the PC to see the phone.

The owner immediately begins to worry, he thinks that he was sold a broken phone. And just go to the settings and select the MTP mode. Next, a folder with the name of your mobile device through which you can transfer files. If none of the above helped, then most likely it's a broken nest. It may not work either in the computer or in the phone itself.

Operating systems very often do not see any devices, but HDD stands out among them. After all, this detail is very important in common work computer, so it must be installed correctly. The problem can arise both during the installation of the operating system and during the installation of hard drives. The elimination method is different for both options, so it is worth considering them in more detail.

Windows 8 does not see the hard drive - solution

Often, during the installation of the operating system, there are no drivers for the hard disk, so the system does not see it. But this almost always applies to laptops, on a PC this problem is less common. You need to look at the certificate of your computer and find out what processor is being used. Next, download and install the storage technology driver.

All this must be done on a separate device, unpack the archive. We throw it on a USB flash drive, in the same place where the operating system is located. Next, during the installation, you need to go to the "Downloads" tab and select the installation of drivers. When it is completed, new sections of the hard drive will appear, the problem is solved.

There is another variation of the problem - when the computer itself does not see the hard drive if it is connected via external media. The problem is solved like this:

Open the control panel and set " Large icons' for the view option. Go to the administration section and select PC management;

Now we launch this instrument and look into left menu, we need to find - Storage devices. Next, go to disk management and view all connected devices.

If you have an eight or ten, then the procedure will pass very quickly, but if XP, there are slight differences. For example, administration can only be opened through the "Programs" tab after pressing the start button.

This article will discuss the reasons why the operating Windows system 8 does not see WiFi networks, as well as how to get rid of them. The fact is that although the specified OS is the most modern and convenient to use, there are still various errors that disrupt the operation of certain devices and systems.

Sometimes these reasons are absurdly simple, but in some cases ordinary user quite difficult to manage on your own. Next, we will analyze everything possible problems that prevent Windows 8 from connecting to a wireless network, and how to fix them.

Why the operating system does not see the Wi-Fi network

In fact, there can be many reasons for this. Moreover, they can relate to both the settings of the router (access point), and the operating system itself, as well as the wireless module. It is impossible to consider all of them, so we will analyze the most common:

Router turned off.
WiFi connection is disabled on the router.
off wireless connection on the computer.
Various hardware bugs.

Why a Windows 8 laptop does not see WiFi networks: Video

So, you should always start by checking the access point - is the router turned on, and is the wireless mode working.

Checking and configuring your wireless router

So, if the system does not see the WiFi network, then first of all you need to check if the router is turned on. This is indicated by the indicator.

Also on the device there are indicators of work wireless module and LAN connections. If the router is working, but the Windows 8 computer still does not see the WiFi network, then we will need to connect to the device using a cable.

How to connect to a WiFi router in Windows 8: Video

As a rule, such a cable is included with the router. After connection, the corresponding indicator on the device will light up. Now you need to launch any browser and in address bar write down the IP address of the router, which is indicated on the bottom cover, or in the instructions. Press "Enter".

After that, you will need to enter your username and password. This data is also indicated on the bottom cover of the router. If you did not change them, then in the vast majority of cases, the login and password are admin, admin, respectively. After that, you will be taken to the settings menu. Click "Advanced Settings" at the bottom of the screen. Next, we are interested in setting up a wireless network (WiFi). We just need to check the box next to Enable Wireless Router Radio (enable wireless connection).

After that, you need to save the settings and reboot the router. To reboot, go to the menu " System settings" (System tools) and find the item Reboot (reboot). Click it and wait a few minutes. As a rule, routers reboot in about 1-2 minutes, but sometimes more - up to 5 minutes. So you'll have to wait a bit.

This completes the access point setup. There is nothing else we can do here. If the system still does not see the WiFi network on a laptop with Windows 8, then you should go to the computer settings.

Operating system setup

The operating system can also have a variety of reasons why the computer does not detect available wireless networks. It is simply impossible to list all of them. Therefore, we will analyze the most common ones. These include the following:

Lack of driver for wireless equipment.
Disabled wireless connection.
Various software glitches.

So, let's look at all these reasons in order.

Checking and updating the driver for the WiFi adapter

If you checked the router and it turned out that everything is fine with it, other devices are connecting to it, and on a laptop with Windows 8 there are connection problems (the device does not see the network), then first of all we need to check that the driver for WiFi is working correctly module.

How to reinstall WiFi driver in Windows 8: Video

To do this, we need to open the device manager. In Windows 8, this can be done in several ways. The fastest and easiest is to press the key combination Wind + R and write devmgmt.msc in the window that appears, then just press "Enter".

If for some reason you cannot do this, then open the file manager (so-called windows explorer). Here you need to find "My Computer". As a rule, the path is - DesktopMy computer. Right-click on "My Computer" and select "Properties". In the window that appears, find the item "Device Manager" and open it.

Now we can see all the devices installed on the computer. We are interested in network hardware. We open it. If this is not the case, then this indicates that the drivers are not installed. If you still find it, then open it and look. The branch that opens must contain at least two devices:

network adapter.
Wireless adapter (as a rule, the name contains Wireless Network Adapter).

We need the second one. If there is no such device, or it is highlighted exclamation mark, then this indicates that you need to reinstall the driver. But where can you get it? As a rule, complete with a laptop there is a disk with the necessary software.

If you do not have such a disk, then do not be upset. You can always download everything required drivers and utilities from the official website of your laptop manufacturer. You only need to specify exact model device and operating system (in our Windows case 8).

It is worth noting that in addition to the driver, it is recommended to download and install an additional utility (program) that is necessary to manage the wireless adapter. After installation desired programs you just have to turn on the WiFi module using the keyboard. It is done by simply pressing the key combination Fn + the button for enabling the module (marked with the corresponding icon). Some laptop models have a separately displayed button to turn on WiFi. In that case, just click it.

Checking the Wireless Network Status in the Management Console

If you installed the driver, turned on the wireless module, but still nothing happened - the computer does not see your network, then you should check the status of the wireless network connection. To do this, we need to open the Network Sharing Center.

Again, there are several ways to do this, but we will open the Network Management Console using the simplest method.

We look in the lower right corner (the so-called tray). Here we need to find the icon WiFi networks(as in the photo). In case no available connections, it is marked with a red cross. Right-click on the icon and select "Network and Sharing Center" public access". In the window that opens, we are interested in the item "Change adapter settings". Here we find the label of the wireless network (as in the photo). If he gray color then it must be enabled.

Right-click on the shortcut and select "Enable". After that, the system will automatically enable the connection and start searching for available networks. If after that the connection problems are not resolved, then proceed to the next step.

Wireless module system failure

In fact, although Windows 8 is considered the most stable and reliable operating system, it can still give some failures. Of course, they are small and almost invisible, but sometimes this can also affect the wireless connection. To find and fix the failure, you need to run diagnostics.

This is done extremely simply. We find the network icon in the tray, and click on it with the right mouse button. Everything is similar to how we launched the network control center, only now we select "Diagnostics of problems." After that, just follow the prompts on the screen.

Windows 8 will automatically start checking the WiFi module, reset all its parameters and restore it to more successful configuration. After that, connection problems will be resolved. It is worth noting that such diagnostics, if necessary, can be performed several times in a row, since Windows 8 does not always find the problem the first time and fix it.

hardware failure

Most last paragraph are hardware errors. If none of the above methods helped you and problems with WiFi on Windows 8 remained (the laptop does not see the network), then this indicates that your wireless adapter has burned out or the antenna is not connected to it.

In the first case, you just have to replace the module. It can burn out as a result of overheating, or heavy dusting. After all, dust not only reduces heat transfer, but also contributes to static discharges that can damage microcircuits.

The second problem can only occur if the laptop has been disassembled or has been repaired. The master could simply forget to connect the antenna terminals to the adapter. Also, it is extremely rare, but it still happens that as a result of heavy dusting, the contact between the adapter and the antenna terminal disappears. In any case, you will have to disassemble the laptop and clean the WiFi module from dust and check and, if necessary, connect the antenna.