Programs

Samsung galaxy note gt n7000 firmware 6.0. Samsung Galaxy Note n7000 Firmware

Surely many do not want to wait for the official samsung update Galaxy Note on Android 4.0 and want to flash their smartphone today. So I decided to write this little instruction so that everyone can quickly and successfully do it. I immediately draw your attention to the fact that you do all the manipulations with your favorite phone at your own peril and risk, and neither I nor anyone else will be held responsible in the event of his untimely departure.

But be scared, everything is not so scary, and after spending about 15 minutes of your time, you will get an updated, great Android on your smartphone and a bunch of other goodies.

First steps

So, picking up your smartphone, immediately copy the contents of the folder efs to a safe place. Since you will have to do a "full wipe", you need to save all the necessary data from the phone, backup sms, contacts and any other desired files, applications, etc. The latter can be done using the .

Preparing for the firmware

The firmware itself, for example

We unpack the whole thing into some folder on the PC, and take out the cable from the table (box, drawer) to connect the phone to the computer. Now you need to upload the firmware file in the archive to the root of the memory card, in this case it will be called ICS_Stunner_1.4.26.1.zip.

Process technology

We turn off the smartphone, connect the cable to it and the PC, transfer it to the “download” mode. To do this, simultaneously hold down the keys: turn on, volume down and center button. A green robot appears.
Next, you need to run the firmware program itself, namely the file Odin3 v1.85.exe from a previously downloaded set. In Odin we don’t change anything ourselves, we just select the CHAINFIRE REPACK I9220LP1-N7000-ICS-REPACK.tar file in the “PDA” item. That's it, now almost with a firm hand, press "Start".
We are waiting for the end of the process, after which we reboot the smartphone.
We go into recovery mode and select the item “wipe data / factory reset” there. This will destroy all data in the smartphone! It is not necessary to do it, but it is highly desirable, a kind of “clearing the brain”.
Select "install zip from sd card" and find the previously downloaded firmware file on the memory card, select it and press confirmation. The process takes less than a minute.
Select "reboot system now" and enjoy the flashed smartphone.

Video: firmware samsung galaxy Note on Android 4.0.4

Now Galaxy Note N7000 users can enjoy latest features KitKat is in a fast and highly stable release thanks to the release of Android 4.4.4 based on C-ROM build 7.1 from the hardworking C-ROM developers.

Custom ROM C-ROM build 7.1 is based on the latest AOSP release. It brings many new features with a buttery-smooth interface to latest firmware kitkat.

Features of Android 4.4.4 C-RoM Build 7.1

Here is a short list of the main features ported to latest android 4.4.4 C-ROM firmware:

Pie
Halo
App Bar
Dark C-ROM
active display
floating windows
Gesture Anywhere
On-The-Go mode
Control Animation
Lock Screen Notifications
App Sidebar Implementation

Interested users can flash Samsung Galaxy Note N7000 by following the step by step guide provided below.

IBTimes UK reminds that it will not be held responsible for any damage to the device during or after the installation of the firmware. Users are advised to proceed further at their own risk.

Preconditions

ROM and instructions provided in this manual Designed for Galaxy Note H7000 only. Check your device model by going to Settings > About phone.
Back up your data and settings using a recommended restore tool like ClockworkMod (CWM) or TWRP as it creates a holistic image existing installations phone. V recovery menu, select Backup and Restore, and then click Backup.
Make sure the appropriate USB drivers for the phone installed on the computer.
Make sure USB debugging mode is enabled on your phone by navigating to Settings > Developer options (NOTE: Press your phone's build number seven times to unlock or reveal hidden developer options under Settings.) Then select the checkbox to enable debugging mode USB.
Make sure your phone has at least 80% battery power to prevent unexpected device shutdown (due to battery drain) when installing the rom.
Make sure the device is unlocked (not tied to a specific carrier) and rooted with the latest ClockworkMod (CWM) Recovery (v6.0.4.5 or higher) installed. If you are installing the CWM recovery app for the first time, check out the video tutorial below:

If the device is stuck on booting or experiencing boot loop issues, clear the cache partition and Dalvik cache a few more times before rebooting.
Let the newly installed rom stabilize for five minutes before you start working on it.

Required Downloads

– Firmware Android 4.4.4 C-Rom
– Compatible Android 4.4.4 KitKat Google Apps
– Philz Touch Recovery v6.07.9 ( CWM Recovery 6.0.4.5 -> save the .tar file via Odin v3.09)

How to flash Samsung Galaxy Note N7000 using Android 4.4.4 KitKat C-Rom firmware

Step 1– Download custom rom Android 4.4.4 C-ROM.

Step 2– Connect and mount your phone storage to your computer using a USB cable.

Step 3– Now copy the downloaded C-ROM zip file to the root folder on your phone's SD card.

Step 4– Turn off your phone and disconnect USB cable from a computer.

Step 5– Now boot your device into recovery mode by pressing and holding Volume Up, Home and Power button together.

Step 6- Once the phone will enter in CWM Recovery, run full reset data by pressing Wipe Data / Factory Reset. Use the volume keys to navigate between options and the power button to select an option in recovery mode.

Step 7– Then reset the cache partition and wait until the process completes.

Step 8– Also reset the Dalvik cache. To do this, go to the ‘advanced’ options and then click reset Dalvik Cache. This will help prevent looping download issues or any other download errors associated with software installation.

Step 9– Then go back to the main recovery menu and select install Zip from SD card.

Step 10– Now click Select Zip from SD card. Use the volume keys to navigate to the C-RoM zip file you previously copied to your phone's SD card and select it by pressing the power button. Confirm disk installation on the next screen and the installation process will begin.

Step 11– After the installation is completed, go to the “+++++ Go back +++++” section and select reboot the system from the menu.

Despite the fact that the third generation of Galaxy Note smartphones is already being sold in full swing, the first option has not lost its relevance yet. It turned out very good Galaxy Note, and to this day he remains one of the most popular devices in the Android world. And therefore you will be pleasantly surprised, but the developers of CyanogenMod have released firmware for Android based 4.4 KitKats. By the way, we are even sure that Samsung will present an official version next year. android firmware 4.4 KitKats. If you want to check out the new version of OS on your Galaxy Note before the official release, then you can use this guide on how to install CyanogenMod 11 on your smartphone.

Of course, the easiest and surest way to find out what's new in future firmware is to use a custom build from a trusted developer. We trust the CyanogenMod team and use the previously released version based on Android 4.4 KitKat. But there are already several firmware versions and which one should be used? Usually, early versions Custom ROMs are very buggy, so you should be very careful in choosing and if you have enough experience, you can take a chance. That's why we recommend latest version CyanogenMod which is the best of all custom ROMs for Galaxy Note.

As you know, CyanogenMod is a developer who release firmware with a huge number of interesting features, which work on any type of smartphones - on top-end, mid-budget and low-cost state employees. Now the CyanogenMod team is actively releasing firmware based on Android 4.4 KitKat, which has already become the CM11 firmware series. That's why this instruction designed to familiarize you with the installation unofficial firmware CM11 on Samsung Galaxy Note N7000.

Since this is an unofficial release of CyanogenMod 11, after installing it on your Galaxy Note, there may still be a few errors and problems, but still the system is suitable for everyday use. Of course, all bugs should be fixed soon and a stable final version will be released, so we will try to be aware when the most a new version CM11 Android 4.4 KitKat.

As usual, CyanogenMod has a lot of features, applications and features that you can now literally feel on your Galaxy Note. In addition, CM11 is based on Android 4.4 KitKat, which will allow you to join those few more users who have become familiar with the new operating system and all its delights. In a nutshell - with CM11 you can improve the performance of your Galaxy Note as it increases performance and time battery life, will speed up the loading time of web pages and the smoothness of paging, and, of course, will work quickly user interface, which is almost indistinguishable from pure android interface 4.4 KitKats.

If you want to use this instruction, then first go through the preliminary steps. Please note that without preparing your smartphone, you will not be able to upgrade to Android 4.4.

your smartphone must be rooted.
your Galaxy Note must also have custom recovery installed; we advise you to install the latest version of CWM or TWRP Recovery, as they have been tested with CM11 firmware.
make a backup copy of the data stored on internal memory of your Galaxy Note, as the flashing process will need to clear it all. Use the recovery features to create a backup or special applications, which are quite numerous in Google Play market.
make a Nandroid backup in case you don't like the CM11 platform and can go back to the previous firmware without too much headache.
Use your computer to temporarily deactivate security protection.
make sure your computer recognizes Galaxy Note i.e. all required drivers installed.
On the smartsheet, in the settings, enable the "USB debugging" option in Menu/Settings/Developer settings.
check battery status on Galaxy Note. If the battery is less than 60% charged, then recharge it before starting the flashing.
follow the step by step instructions, but only if you have the Galaxy Note N7000 version. This firmware CM11 Android 4.4 KitKat is only compatible with this version of the device. If you do not follow everything that is written in each paragraph of the instructions, then you will have a great chance to get a non-working brick from Galaxy Note.

You must understand that no one will give a full guarantee that everything will be successful, even if you follow all the tips in the instructions. Also, flashing will increase the counter by 1, that is, and this deprives you of any guarantees. If you suddenly just recently bought a Galaxy Note and the seller's warranty is still preserved, you can return your warranty by returning the created backup or simply by installing the stock official firmware. And do not forget that you will get root rights, which means that all updates will have to be installed manually.

Installation on Galaxy Note N7000 firmware CM11 Android 4.4 KitKat:

1. You can find the latest CM11 Android 4.4 firmware for Galaxy Note N7000 from this link.
2. You can download the GAPPS application package from this link.
3. Save the files on your computer so that they are in a visible place, but in no case unzip the archives!
4. Connect your Galaxy Note to your computer.
5. Wait for the computer to recognize your device.
6. Copy the files you downloaded in step 1 and in step 2 to microSD card Galaxy note.
7. After copying is complete, disconnect your Galaxy Note from your computer.
8. Turn off your smartphone to boot into recovery mode.
9. To boot the Galaxy Note into recovery mode, hold down the Volume UP button, the Home button, and the Power button at the same time.
10. Then, already in recovery mode, you need to select the “wipe data factory reset” item.
11. After that, select "wipe cache partition" in the same place.
12. Go back through the menu, select "advance" and select "wipe dalvick cache".
13. Return to the main recovery menu again and select "install zip from SD card" and "choose zip from SD card".
14. Select the CM11 firmware file and install it on Galaxy Note N7000.
15. Repeat the same process with the GAPPS file.
16. At the very end, you need to select the "reboot system now" item.

That's basically it. Now it is worth noting that the first boot of the system can be quite long, but if your Galaxy Note is stuck at the boot stage, then you will have to boot into the recovery mode again and do a "wipe data factory reset" and "wipe cache partition". Also, if you don't like new firmware CM11, you can use the "backup / restore" menu again with the help of recovery if you made a Nandroid backup.

Congratulations, you have now installed Android 4.4 KitKat CyanogenMod 11 on your Galaxy Note N7000.

Found an error? Select it and press Ctrl+Enter

Development team OmniROM does not sit idly by: at least this custom firmware the youngest among the existing ones, but it is in no way inferior to its competitors. Also pleased with the efficiency of the creators OmniROM. Thanks to the close-knit work of the team, all owners Samsung Galaxy Note N7000 it became possible to update the smartphone to the latest version operating system– . Next you will find detailed description the entire procedure, including the preparatory phase, as well as links to download the update file and Google applications.

Firmware OmniROM KitKat entirely based on AOSP Android 4.4, but it also contains a series unique features, including a small pop-up window for incoming calls, the issuance of work permits for each individual application, changeable quick settings, support for running multiple windows at the same time. Full description of all features OmniROM can be found.

Separately, it should be noted that OmniROM KitKat Nightlies is a nightly build, which means it still contains a number of bugs and bugs. If you encounter them by installing the firmware on your Galaxy Note, you can send to developers OmniROM small report. This will allow you to get a stable version of the firmware more quickly.

And now let's move on to the preparatory stage:

Use this manual only for Samsung Galaxy Note with model number N7000. Setup files, the download links of which are available in this post, are suitable exclusively for the aforementioned device.
On the Galaxy Note need to get root access and install the latest version CWM Recovery.
For installation OmniROM KitKat Nightlies need to be done factory reset, this means that all information stored in the system partition (system partition) Galaxy Note will be deleted. In this case, the external and internal storage will remain untouched.
Create backups applications, settings, text messages; Synchronize your call list with Gmail.
On the Galaxy Note enable USB debugging.
Create Nandroid backup. This will allow you to return to the current firmware version at any time.
Be careful and careful not to skip the points indicated in this manual and do not change their places.
Charge your battery Galaxy Note.
Do not forget that the entire responsibility for the procedure lies solely with you.

1. Download the latest version OmniROM KitKat Nightlies .

3. Connect your smartphone to PC and transfer both files to it. Do not unpack archives.

4. Disable Galaxy Note N7000 from PC and turn off the device.

5. Load your smartphone into recovery. To do this, press and hold Volume Up, Home and Power until the screen appears recovery.

6. Now that you're in recovery, create Nandroid backup: option backup and restore. The resulting file must be named and saved on the internal storage.

7. Now in the main menu you need to select wipe data/factory reset and confirm the start of the process.

8. And only after all this you can proceed to install the update file. Choose an option install zip from sdcard, and then choose zip from sdcard, find OmniROM KitKat Nightly zip and confirm the start of the installation.

9. After the update file is installed, do the same steps (point 8) with the file Gapps.

10. Having installed both files, return to the main menu.

11. Reboot Galaxy Note N7000 to normal operating mode. The first boot may take longer than usual - 5-10 minutes, so do not panic. If the smartphone completely freezes, then you need to return to recovery and repeat the entire installation procedure. If this did not help, or you do not like the new firmware, you can use Nandroid backup.

If your Samsung phone Galaxy Note n7000 needed to change the firmware, most likely one of the following problems happened:

the phone does not turn on;
the phone is constantly rebooting;
Galaxy Note n7000 firmware is outdated;
you need to reinstall the smartphone software after an unsuccessful firmware.

We would like to note that for all changes in software telephone, you are responsible. It is not necessary to look for the guilty if any actions you did were done incorrectly!

Preparing for the firmware

First, let's prepare everything you need for the process.

Firmware instruction

So, you have fulfilled all the conditions of the preparatory stage, we begin the update.

You need to download Android 4.3 CM10.2 ROM to your computer, as well as Google Apps for your phone model;
Connect the smartphone to the computer with a USB cable;
Copy the downloaded files specified in paragraph 1 to the destination folder of the SD card;
Turn off your smartphone and disconnect from USB;
Download Recovery. To do this, hold down the key combination: "Volume up", "Home", "Power". You can release these buttons only after the phone screen starts flashing. Recovery mode enabled;
In this mode do backup and recovery. To do this, follow the following path: Backup and Restore-> Backup.
Then we clear the data: Wipe Data/Factory Reset -› Yes
Return to the recovery mode start menu: -› Go Back
Follow the following path to clear the cache: Wipe cache partition -› Yes
In the next step choose: Advanced-› Wipe Dalvik Cache -› Yes
The next step is to select the downloaded firmware version: flash zip from SD card -› choose zip from sdcard -› Android 4.2.2 ROM -› Yes
Further: flash zip from SD card -› choose zip from sdcard -› Google Apps -›Yes
The final stage of rebooting the smartphone. Follow the path: Go Back -› Reboot system now