Windows

How to Connect Phone to Computer - Xiaomi Redmi Can't See USB Driver. How to connect xiaomi to a computer - full instructions Comp does not see redmi note 3

Video: one way to connect Xiaomi to PC

If you need to quickly transfer photos from Xiaomi to your computer or install system applications, synchronization with a PC via USB will help. If you run into difficulties this connection, in this article we will tell you step by step how to do it.

Guide for connecting Xiaomi to a computer via USB

Step #1

So, first of all, we need a USB cable, with which we connect USB ports smartphone and PC, respectively. If the connection is successful, in the window that appears, select desired mode. For transferring system files - MEDIA DEVICE (MTP), for transferring images - CAMERA PTP.

Step #2

If the connection fails, check the USB connectors and the cable itself. If this is not the reason, there is a possibility of a flown or custom firmware. We recommend updating the software from professionals in the Xiaomi service center.

Step #3

If the smartphone does not respond when connected, go to the phone settings, then to the ADVANCED / FOR DEVELOPERS / USB DEBUGGING-ENABLE section. As a rule, the tab FOR DEVELOPERS disappears after installing anti-virus software. To eliminate the failure, you should reset the settings to the factory settings, after saving important files to another medium.

Step #4

If the options above do not help to synchronize, you can download in the market special application-Terminal Emulator for Android. This program allows access to Android system from the command line.

In our case, to enable the MTP connection, we write in command line- su, then enter - setprop persist.sys.usb.config mtp, adb, confirm and then enter - REBOOT. To transfer photos, enable PTP mode by entering on the command line - setprop persist.sys.usb.config mass_storage,adb. This method often helps on smartphones. Xiaomi Redmi 3 PRO, 4 PRO, Note 3, Mi MAX, Mi 5.

If you look through the forums dedicated to Xiaomi devices, you can
IT whole line complaints that the computer does not see the phone. Working with information, transferring it from one device to another is an important part of the life of a modern person. If such a collapse occurred with your smartphone, we will tell you what to do next. So, attention!

Why doesn't the PC want to see the smartphone?

There can be many reasons, and the point is not that these devices did not agree on the characters! Perhaps there are problems with the drivers on one of the gadgets. It is worth reinstalling them and, perhaps, the connection problem will disappear.

The problem may be in the data cable you are using. To avoid problems with synchronization, you should use only the original USB cable. Even if you ordered a high-quality cable from another company, and not the one that was bundled with the device, malfunctions can occur frequently or periodically.

With absence required drivers on a laptop or PC, the phone can be charged from the PC, but it is not identified as a storage medium. Downloading and installing these most ill-fated drivers can solve this problem.

If you have done all the manipulations mentioned, but the device does not connect to the computer automatically, you will have to do it yourself and manually. The item "USB connection to a computer", located in the menu, has a subsection media device (MTP) - it is checked. Next, click "attach USB as a drive", if necessary. In the window that appears, the user clicks OK.

Connect Xiaomi Redmi Note 3 to computer you can by going through the chain: "settings → advanced → for developers → USB debugging → enable". Sometimes, due to the work of the antivirus, the “for developers” column disappears, here you have to work hard to solve the problem.

Restoring the original factory settings of the smartphone is the easiest and most obvious way to fix such a defect. The information installed on the smartphone may be erased. Before recovery, it is worth copying to another medium, for example, to microSD card all important information. So you save all important files, programs, and the device will work smoothly again.

You should also be careful when downloading programs for the device, only from the official market. If the question is how to connect xiaomi redmi 3 to computer still tormenting you, download the Android Terminal Emulator app. On the net you can find a chain simple actions, after the implementation of which the smartphone and PC work together again, like good old friends. The main thing to remember is that no matter what problem you have, you can find tips and tricks, other users and experts will tell you what to do and how to solve any difficulties. If we talk about the safety of a smartphone, then its guarantor will be the use of high-quality protective accessories. The Redmi Note 3 case and film, original in terms of compatibility with the device, will protect it from cracks, scuffs and chips, dents, scratches.

Users complain that they cannot connect their smartphone to a PC or laptop. Sometimes it's just necessary to transfer between 2 devices important information. What to do if such a nuisance also happened to you, where to turn, what to press?

Instructions on how to connect Xiaomi Redmi 3 to a computer

There are many reasons why a computer does not perceive a smartphone. Hardware malfunctions (data cable), activation of the wrong connection mode instead of a USB drive, lack of necessary drivers or their conflicts. To begin with, users and experts recommend using only the original cord, even if the accessory you use fits perfectly in size, fits into the phone jack normally.

They often complain that when connected, the smartphone is charged from the PC, and both devices cannot be synchronized. If the PC does not detect the phone, the problem may be that the correct drivers are installed on the computer.

If the phone does not connect to the PC on its own, this will have to be done manually. In the menu "USB connection to a computer" there is a subsection media device (MTP) - you need to check it. You need to click "attach USB as a drive" if necessary. A dialog box will appear in which you must click OK.

You can go through the following chain to solve such a problem: “settings → advanced → for developers → USB debugging → enable”. It also happens that the “for developers” item disappears due to the actions of the antivirus. Then you should look for another way to fix such an error.

The easiest way to fix errors in the smartphone is to restore the factory settings, perhaps some information set by the user will be lost, but the device will work again with a bang.

Here is another way to solve the problem of connecting the device: in the Google market, you need to find and download the Android Terminal Emulator application. The smartphone is connected to USB cable, after the user enters ATE and types the following text: su to connect the gadget in USB mass storage format (SuperUser will require superuser rights after entering text that requires confirmation). Setprop persist.sys.usb.config mass_storage, adb is entered and the enter key is pressed. We write reboot, press the start button, after which the gadget reboots. To connect a device in the MTP format, we write su with the need to confirm the competence of the superuser. We write setprop persist.sys.usb.config mtp, adb, click enter. We enter reboot, click enter again and reboot the gadget. Users write about the effectiveness of this method, the computer and laptop again perceive the smartphone.

Remember to download additional programs on the device follows only from trusted sources, even those found in the google-market, because the security of the device depends on this. By the way, about safety - a high-quality case for Xiaomi Redmi 3 will keep the device from cracks and scuffs, chips, scratches and dents.

Accessories that will be useful to the owner of a mobile device

Cases of different types for Xiaomi Redmi 3 effectively protect the phone from damage, the case will not interfere with work if it is original in terms of compatibility with the gadget. screen protector - a film or glass also protects the device from defects. Good in quality Case for Xiaomi Redmi 3 will not interfere with connecting the cable to the gadget, as it is equipped with all the necessary holes. Let work with Redmi 3 functionality bring only positive emotions, will be easy and productive!

Products mentioned in the review

Quite often, most users need to transfer important information from their phone to Personal Computer or vice versa. The procedure is simple at first glance, but many people still have the question of how to connect Xiaomi smartphone to a computer via USB without the slightest problem and what is needed for this.

Popular reasons why the computer does not see the connected phone

Let's start with the basics: for example, you know all the connection steps well, but the computer just does not recognize the device. There may be several reasons:

Absence the right driver on PC;
Cable of poor quality, dirty, with a fracture;
Problems in operating system(virus or simple glitch);
The connectors on the system unit are clogged, meaning that something got into them (or simply not working).

The first and most elementary thing is to check if crumbs, dirt, dust have got into the connectors. Very often, foreign bodies accumulate there, and because of this, electrical contact does not occur. Carefully clean everything with a wooden toothpick, and then use special plugs. Now let's discuss the rest of the steps.

The standard way to connect a Xiaomi smartphone to a computer

As mentioned above, there may be several reasons for problems, so I will try to explain to you in as much detail as possible what and how to do. You need to follow our steps in order. to avoid problems in the future. I give a few steps correct connection phone to a computer, but if you are sure that some of the points have already been completed by you before, you can skip it.

Step 1: Install Drivers on PC

As noted above, in many cases, problems arise precisely from the drivers. Sometimes, when connected, they are installed by themselves and updated at the right time, but if this did not happen - we carry out the procedure ourselves.

We search the Internet on trusted sites (preferably on w3bsit3-dns.com, based on your Xiaomi phone model) two archives " Program for MediaTek" and " Program for Qualcomm". Names may differ slightly from those indicated. Usually the file size is small, within 15-20 megabytes. After downloading, we start the standard unzipping. Now we transfer the files from the Downloads folder so that they do not accidentally delete them. The best place- the "root" of the system, that is, system disk(in most cases this is drive C). Usually, but if there is no such notification, we restart the computer on our own. That's it, you're done.

Pay attention! If you are the owner of Windows 8 or Windows 10, be sure to disable the digital signature of the program before installing the drivers.

Step 2: Enable USB Debugging

Too good way, which often helps if the computer does not recognize the phone, and on the contrary, a successful connection is displayed on the smartphone. We go to " Settings”, scroll to the very bottom of the screen and find “ Additionally". The " For developers". We find the corresponding inscription " USB Debugging' and check the box.

Do not forget that this is only possible if you have developer rights. Want to get them? The procedure is extremely simple.

Again we turn to "Settings" - "About the device". Next "Current version of MIUI".
We start clicking on this inscription about 7 times. When the notification appears You became a developer"- we stop. Ready.
After that, go back to the settings (press back), and scroll down. There should be this item.

For reference! On my Xiaomi Mi5, it was in the "Advanced settings" subcategory, somewhere in the middle of the settings.

If you do not find the “For Developer” item, then the work of the antivirus is to blame. Return the device to the initial factory settings, remembering to save all important information on additional media beforehand (memory card is not suitable, materials may be automatically deleted from it upon reset).

Step 3: Switch Camera Mode

Sometimes it happens that the computer sees the smartphone, but only works in camera mode. That is, you can transfer photos, pictures, but copying documents, music, files is not available. Of course, this does not suit many. We hasten to please: the problem that has arisen is solved, and quite simply.

As soon as the connection is made, in the first seconds in the notification curtain, we receive a corresponding notification. We quickly click on it. A small window appears asking you to choose:

Charging only;
File transfer;
Photo transfer.

Accordingly, we need the second option, it is also called MTR. If you did everything correctly, now the device will be recognized as a drive.

Step 4: Use Computer Settings

Sometimes it happens that the connection icon simply does not appear in notifications and cannot be found even on the main My Computer screen. Here the problem lies in the PC itself. Find the start menu, search for " Device and printers". The phone model should appear, click on the inscription right click mouse, the menu opens default settings. Now "Troubleshooting" and "Update Driver", it is worth resorting to the first step.

We restart the computer and preferably the smartphone. Should help.

Connect Xiaomi phone to PC using Terminal Emulator

This is more complicated way, which is already produced using third party application. It directly affects the operation of the operating system, so we strongly recommend starting this operation only if you are confident in your knowledge and skills!

Downloading the app from Google Play, we also install in the standard way.
We open the program, in the terminal we write "su" and click "Confirm".
Next, enter the phrase "setprop persist.sys.usb.config mtp,adb". It is necessary to type strictly without errors, not using capital letters and correctly punctuating, otherwise the command will not be executed correctly.
Click " Input". Further " reboot» – « Input". The reboot starts automatically. Ready. This method relevant only for connecting to media device mode.

If you need USB storage mode, do the following: all steps are the same, except for the second. In place of a long entry, we type "setprop persist.sys.usb.config mass_storage,adb". Unfortunately, this option may seem complicated and confusing, but for many Xiaomi users, it instantly helped to solve the problem.

Connection on different Xiaomi models

Usually all operations on Xiaomi:, etc. are similar, but not here. Each device model has, respectively, different versions firmware, different settings and even different operating systems. All this directly affects the connection and the occurrence of possible problems.

Therefore, in future articles, we will describe in detail the actions on popular models. Will be attached detailed instructions for each Xiaomi model, explanations and tips. And you will receive an answer to any question of interest in special section, you won't find necessary information- Feel free to comment. Don't forget about official supportXiaomiwhere you can write at any time!

Video instruction

How to fix connection problems

Download drivers

When you connect your Xiaomi Redmi or Mi to the PC, several processes are launched at the same time, and they do not always work as they should. If, for example, your computer is not able to automatically find and install drivers for a smartphone, then the MIUI gadget will not function normally. To begin with, it is important to know that it is worth connecting only through the original USB cable (not a fake). If so, then it's not the problem. After that try to connect Xiaomi phone to other USB ports (note that the rear system block there are also such connectors).

To install the drivers, just download, unzip and install the following 2 archives: and . If you have Windows 8 or higher, you must first disable the check digital signature drivers and restart your PC. A little later we will describe another way to install the driver.

Enable debug mode

Installing drivers on MIUI is easy, but it also happens that this method did not help solve the problem. In the second option, everything is also very simple. To implement it, go to your smartphone in Settings - Advanced - For Developers - USB Debugging and enable this feature.

It often happens that at the moment the smartphone is connected to the PC, the user sees a menu on the monitor that allows you to select the type of connection. We need an MTP type connection, which involves connecting a computer to a smartphone as a multimedia device. In addition, in the phone dialing menu, you can enter this combination: *#*#13491#*#* , which brings up the same menu. The menu itself looks almost the same on all devices, be it Xiaomi Redmi Note 3, Redmi 3 Pro or Xiaomi Redmi Note 2.

What to do if the phone connects in camera mode

In addition to the two above, there is also a third option, which we singled out separately due to its non-standard. If your Mi connects to the PC only as a camera, and not as a drive, then you can try transferring the files you need to the Photos folder on your phone, and then through file manager sort them into sections. But this method is suitable for the lazy - if there is no desire to delve into the problem and make some effort to solve it.

Pirated software installed on the phone or the “left” MIUI firmware can also be a hindrance, but now we will not delve into this. We would like to offer you some more complex options if the PC did not see any devices connected to it.

More complex methods

If a simple ways solutions to the problem did not help you, and until now the PC does not see the smartphone, we suggest you use a couple of new tips.

Through the terminal. To do this, go to Play market and download the app Android Terminal E. Install it, then connect your smartphone to the computer, thereby accessing the machine in USB drive. After that, in the application, write "su" (this is how super-user rights are enabled) and confirm the choice. Then we enter another command: setprop persist.sys.usb.config mass_storage,adb and press the Enter button. At the end we write Reboot, thereby restarting the smartphone.
Some users who want to log into the phone via MTP connect in the same way, changing only one phrase in the last command, replacing "mass_storage" on the mtp.

If we recall such smartphones as Xiaomi Mi Max or Redmi Note 3 Pro, then there were no such problems with them, which is why it is unusual that they appeared just with the third Redmi smartphones. The Note 2 didn't have these issues either. But come on, these are the developers' problems, and we must solve the connection problem.

How to restore connection settings

If for some reason your connection settings have disappeared and you want to restore access to them, no problem. For this, there is a program called (it is not in the play market - download it from this link). After downloading and installing the program, run it. There will be several fields, in the second field (package) select item com.android.settings, in field Class - com.android.settings.UsbSettings. We press the button Create Shortcut and enjoy the result.

Now you get full access to all connection settings. By the way, if you return to the same drivers, we also recommend installing the program - with it you will forever solve the issue of their absence. Connect a smartphone with an already installed program, right-click on the "My Computer" window and go to the Task Manager. There, find unidentified devices - a smartphone and a cable - and then click on "Update" In chapter "Driver" and specify the path in the MiPhone Manager folder to main/Driver. Click "Further" and update the drivers on the cable and smartphone tabs. We hope this way helped you and the computer will tell you "I see a new device".

Outcome

Most often, problems with connecting any smartphone, for example, Redmi Note 3 Pro to a PC, lie in the details, and it is not difficult to solve them. In the event that the reason lies in the phone itself, then now you have several reliable methods for solving this issue in your arsenal.

And if you have a special case, and none of the methods suggested above helped, then most likely the roots of the problem lie much deeper than you think. You may have to reflash your phone, but that's another story.