Standard passwords from wifi routers d link. TP-Link Router Password - How to Change the Default WiFi Key or Set Your Own Admin Password? TP-Link: we look at the password from Wi-Fi in the settings

Change the factory password.

In field NewPassword Enter a new password.

In field ConfirmPassword repeat new password.

Change the factory password.

Default: Login admin, password is empty.

Couriers-configurers must change the password in the settings to the Serial number indicated on the box (S/N). When reconfiguring, it is also recommended to use it as a password for the router and wi-fi S / N ( serial number).

In the interface of the router, you need to go to the tab Maintenance(MAINTENANCE), Device Administration menu.

In field NewPassword Enter a new password.

In field ConfirmPassword repeat new password.

Then press the button Save settings.

After that, the router will prompt you to re-enter its settings.

SettingWi-Fi on the router.

In the router interface, you need to go to the SETUP tab, the Setup menu wireless network(Wireless Setup). Manual Wireless Connection Setup button.

1. Section "WI-FI PROTECTED SETUP" it is better to uncheck the Enable checkbox, since not all wireless adapters support Wi-Fi technology Protected Setup.
2. Specify an identifier ( SSID) of your wireless home network (NETBYNET-980-25-00 ) in field "Wireless Network Name" ( dlink by default).
3. Select a wireless channel, any channel from the dropdown list "Wireless Channel".
4. Select the wireless security mode.
5. Drop down list security mode select "Enable WPA/WPA2 Wireless Security (enhanced)"- this is the most safe way protect your wireless network.
6.Cipher Type >TKIP» .
7.PSK/EAP > PSK.
8. In the field network key You must enter any set of numbers, from 8 to 63 in length. They also need to be remembered so that you can specify them when connecting to the network. It is recommended to use the serial number of the device as a key (indicated on the box, in the form S/N ########).
9. Click on the button "Save Settings" to apply and save your settings.

Internet connection setup.

We press the button Manual Internet Connection Setup

Configuring the router in modeAccesspoint.

Bridge mode (English bridge). in this case, to access the network, you will need to set up an Internet connection on your computer.

Before switching the router to access mode Point Mode be sure to configure the router settings (wi-fi, etc.). After changing the mode, control is not possible.

To change the mode, in the Access Point Mode, check the Enable Access Point Mode checkbox. Then click the Save Settings button.

Setting in router mode.

SettingPPPoE at automatic receipt localIP addresses (DHCP).

Russian PPPoE (Dual Access)
2.userName: Your login from the contract
3.Password: Your password from the contract
4.ConfirmPassword: repeat password
5. Press the button Clone MAC Address
6.Connectmodeselect Always
7. Save the settings with the button SaveSettings and wait for the router to reboot.

Manuals for setting up a connection on a computer - http: // site /

Setting up PPPoE with a static local IP address.

1. My Internet Connection is: Russian PPPoE (Dual Access)
2.userName: Your login from the contract
3.Password: Your password from the contract
4.ConfirmPassword: repeat password
5. Press the button cloneMACAddress
6. Connectmodeselect– connection establishment mode « Always" for permanent connection.
7. Choose an item static IP
8.IP address- IP Address given to you by your ISP.
9.subnet mask– subnet mask of the provider.
10.Gateway– provider gateway.
11.Primary DNS Address– provider's preferred DNS Server ( 212.1.224.6 ).
12.Secondary DNS Address– alternative DNS server provider ( 212.1.244.6 ).

Save settings with a keystroke Save settings.

Setting up PPtP (VPN) when automatically obtaining a local IP address (DHCP).

In field My Internet Connection is: select Russia PPTP Dual Access.

1. Select a connection with dynamic address assignment by a Dynamic IP provider.
2. Press the button Clone MAC Address.
3.Server IP/Name– IP/Server name of the provider.
4.PPTP Account
5.PPTP Password
6.PPTP Retype Password
7. Meaning MTU-1372
8.Connect mode select— connection establishment mode.

Select " Always Save settings.

Setting up PPtP (VPN) with a static local IP address.

In field My Internet Connection is: select Russia PPTP Dual Access.

1. Select a connection with a statically assigned address by an ISP StaticIP.
2.IP address- IP Address given to you by your ISP.
3.subnet mask– subnet mask of the provider.
4.Gateway– provider gateway.
5.DNS– ISP's DNS Server ( 212.1.224.6 ).
6.MAC Address- press the button Clone MAC Address.
7.Server IP/Name– ISP server name ( ppp.lan).
8.PPTP Account– username for authorization in the provider's network.
9.PPTP Password– password for authorization in the provider's network.
10. Meaning MTU — 1372
11.PPTP Retype Password– repeat the password for authorization in the provider's network.
12.Connect mode select— connection establishment mode. Select " Always» for a permanent connection. Save settings with a keystroke Save settings

NAT when automatically obtaining an IP address (DHCP).

In field My Internet Connection is: select from the list static IP.

1. Press the button Clone MAC Addresses.
2. Save settings by pressing a key Save settinggs.

Checking the Internet Connection Status

Change the factory password.

Default: Login admin, password is empty.

Couriers-configurers must change the password in the settings to the Serial number indicated on the box (S/N). When reconfiguring, it is also recommended to use wi-fi S / N (serial number) as a password for the router.

In the router interface, go to the MAINTENANCE tab, Device Administration menu.

In field NewPassword Enter a new password.

In field ConfirmPassword repeat new password.

There is an internet connection. In general, now the world is hard to imagine without it: every day around the globe people go online. Someone is sitting in in social networks, someone watches their favorite series, and someone listens to music. The Internet has taken one of the main niches in our lives. And there is no need to talk about its significance. And even more so, there is no need to say that it is now quite difficult to imagine a world without Wi-Fi routers. Due to the rapid growth in the number of network users, as well as to improve the convenience of its use, such an invention as a wireless connection was invented.

Standard passwords WiFi access do not guarantee security

A Wi-Fi router is designed to distribute the Internet to several devices for their simultaneous connection. That is, if you have a router at home, then all family members can use the services at the same time global network. After acquiring such a wonderful technical thing, the question arises before you, in fact, about connecting to the Internet through a router. And if the master installed it for you, but forgot to tell the password from the router, which is simply necessary for communication between devices, then you will not even be able to enter the search engine website. What to do? Is there a generic or default password for Wi-Fi routers?

First, you should still check the possibility of connecting without a password: sometimes it may not be set (in very rare cases). To do this, use the power button to wake up the Wi-Fi router, wait until all the necessary indicators light up, and connect to it from your smartphone or tablet. It is probably not necessary to say how to do this. In the list of discovered networks, select the one you need and click on it. If a warning pops up about entering a password, then you, fortunately, or maybe unfortunately, have it. Then we move on to the next paragraph. IN otherwise you can be congratulated a little: you don’t have a password, and you can access the Internet from your device.

Secondly, look at the router device itself: it usually has stickers on it. One of which may contain a password. You can find it near the word of the same name or the name PASSWORD. For example, Rostelecom routers have such an arrangement. Also, the Wi-Fi access key is usually located in the box from the router or on the network access card.

However, do not forget that, first of all, you must either set up and prepare the router yourself for full-fledged work, or leave this matter to the master. So, you can contact the support service of the same Rostelecom, where you will be assigned a time for the arrival of a special person. If none of the proposed options helped you, or you don’t really want to wait for the arrival of the master who is on vacation, we try to pick up a universal password from the list offered on the website http://www.phenoelit-us.org/dpl/dpl. html. Pay attention to the name of the equipment: after all, each company has its own special combination of characters. Or you can use the services of the site http://routerpasswords.com/.

Also, do not confuse the network security key (the same password from Wi-Fi) with the password presented on the access card. They have different purposes. For example, the password on the card is used to set up access to the Internet and initial installation equipment parameters. While the Wi-Fi password is only needed to connect wireless connection on other devices (smartphones, tablets, laptops, etc.) to an already configured and ready-to-use router.

Today we got a little closer acquainted with the operation of Wi-Fi routers, their configuration and settings. The main issue was the availability of standard or universal passwords for these modules. wireless communication. We hope that you received the answer to it and became more aware. You also learned a little about where the security key can be located in general, if you, for example, forgot it. Now you can not immediately call the service technical support with complaints, because you are able to solve these problems yourself. We share our opinion and experience in the comments, thereby helping each other in solving some problems.

The access key to the network or to the network administrator's page is lost, do not lose heart. There is a possibility to restore them. This article will help you solve this problem.

Standard passwords for routers

Each wi-fi router operates on the basis of Internet access data and local network, which are the username and password. They are created at the very beginning of use at the first stages of setup. network equipment. The login is always the same word in Latin “admin”, and the password can be either the word “admin” or the numbers 1234, 123, 0000.

Also, there may be no password at all. And for the Kyivstar operator, such a login is possible.

Photo: enter login and password kyivstar

In any case, in order not to try your luck and not waste time on a random selection, you need to look at the data sheet of the router, which is included and may look like a brochure. If the router came to the user as a used product and the data sheet is not available, you should ask your friends, acquaintances or relatives who use a network device manufactured by the same manufacturer, because. login and password will be the same.

Factory settings

On the initial stage settings after entering standard identification data, the user will be offered the opportunity to change the login and password to make it difficult for unauthorized users to enter the domain. Those. on the computer screen, the interface will display all the necessary data, as well as prompts for the formation of an "access key", which includes a login and password.

After passing this stage, the user will be prompted to create a local network with automatic connection to the Internet for the convenience of work in the future. At the same time, do not confuse the login and password for accessing the local network, which operates on the basis of the router, and the Internet, because. they are two different things.

I forgot my router password, what should I do?

What to do if you forgot your router password is a common question for many users who have forgotten or lost their data. How to be in this situation? Restoring the key is easy. It all depends on which network password and login was lost. If the matter is in the local network, i.e. in your router, there is no 2.serious difficulty to restore it.

Video: resetting the interface password of TP-Link routers

If the user has forgotten the password of the Wi-Fi router, he needs to proceed as follows:

How to recover the password and login for the router, if they are necessary to access the Internet?

In case of loss of data for the use of resources world wide web the following procedure is required:

Thus, the user has the opportunity to independently correct the situation without outside help.

Admin Domain Recovery

In addition to those users who have lost data on access to the local network and the Internet, there are also those who manage to lose access to the administrator page ( home page router). In this case, there is no chance to recover the lost information and change the settings of the network device. The forums often feature a question like: “I forgot my login and password from the admin panel. What do i do?". It is easier to reset the settings in the network device and re-create a new local network.

To reset the router parameters, just press and hold the button on the rear panel in this position for several seconds.

Photo: reset button on the back

In this case, the lights on the front of the device will go out for a while, and then work again. The button itself is located in a small hole to prevent accidental reset, and you can only press it with the help of an additional device, which can be a match, needle, pin, etc.

Recovery Methods

The router settings will be of no use if the user loses the access keys to the admin page, router, local network and the Internet. In this case, each of the access keys will be restored differently. The main methods are hardware and software.

The hardware access recovery method is associated with checking the parameters on the router's home page, and the software one relies on the use of the software registry and special working applications that scan all information on the computer about network use.

For hardware recovery to the network, at least a login and password for the administrative page are required, on which all the parameters and settings of the local network and Internet connection are formed. To enter the administrator's page, you need to type the manufacturer's IP address in the address bar of your Internet browser.

The IP address can be found on a sticker on the bottom of the router.

If there is none, then the home addresses of the routers look like this:

1. D-link 192.168.0.1
2. Zyxel 192.168.1.1
3. Asus 192.168.1.1
4. Netgear 192.168.1.1
5. TPlink 192.168.1.1

After logging in to the corresponding address of the router, the user will be presented with an interface with many settings and network parameters. In order to find out the data on the local network, you need to enter the "local network" tab. Also, this tab can be called a wi-fi network or have names similar in meaning.

After that, the user must find the "wpa key" parameter. Opposite it, the access password to the router will be located.

Password, access to the router - that's not all. In addition to the local network login key, you may also need login data for the provider's domain. This data is also specified in the settings of the network device.

To do this, after fixing the data on access to the local network, you need to go to the "Internet" tab, where not only the parameters and connection technology will be indicated, but also data on entering the Internet.

Most often, the login and password are located next to the line "setting account' or 'connection settings'.

Recovery utility (program)

except hardware way to eliminate the problem of losing identification data when entering the Internet and local network, there is also a software one. It is used by professional users and is not suitable for beginners. Thus, the participation of a second user with more high level knowledge in this area.

At program method the following working applications are used to help recover the necessary data by logins and access passwords:

1. Dialupass;
2. Remote Desktop PassView;
3. RouterPassView;
4. WirelessKey View;
5. Wireless Password Recovery.

Photo: password recovery program

And this is not the whole list. By themselves, these programs are amateur developments, and not the result of the work of professional teams, so the interface of these programs is not always convenient and understandable for a beginner. But if the user nevertheless decided on independent actions, then he needs to be prepared for the fact that most links to such working applications may contain malicious software.

Throughout the work of the profile program for searching and detecting the login and password from the network, an antivirus with the maximum possible set of functions should be running on the computer in order to prevent infection of your computer. personal computer and damage or theft of personal data.

Work similar programs is based on the basic principles of the operation of the operating system, which, in turn, captures every step of the user in the electronic information space. At the same time, a register is formed that describes all the actions committed recently. They will be stored as encrypted files until all the hard disk space is full.

It is impossible to open these files without special knowledge and professional skills. Not a single program known to many users will be able to read them and display the necessary information on the computer screen. In this case, you need special applications, helping to reveal encrypted logins and passwords.

After appropriate use of the program, the owner of the PC will be able to independently use both the local and the Internet network in the future. But at the same time, we must not forget that all access keys to networks must be saved without fail as in the form regular file with printed text, and in writing, so as not to experience significant difficulties in connecting in the future.

Video: installing and configuring a Wi-Fi router

To prevent the loss of data for access to the local network and the Internet, novice users are recommended to take the following steps:

1. during configuration and installation of drivers for network equipment, the program will offer to save a file with backup data for access on the PC desktop;
2. after creating with network access data, the file must be copied to removable media and make another copy in any other folder;
3. after copying the files, you must manually write down on paper all the necessary logins and passwords from the network.

In addition, do not forget that the keys are also freely available for viewing from the computer of the user who configured the router. This data can be seen in the properties of the network. To do this, you need to find the network connection icon on the taskbar on the desktop in the lower right corner.

Then point the cursor at the name of the home network and press the right button. When a new window appears, select the "properties" option and in the next new window you can already see all the necessary keys.

Using these tips will reduce the likelihood of a complete loss of the necessary information for the local Internet.

Question answer:

How to view Wi-Fi password in Windows?

To view the password to access the wireless LAN in Windows, you must:

Is it possible to recover the network security key?

The security key for accessing the local network is easy to recover. It is enough to go to the administrator page and in the settings find the line "security key", where the access password will be indicated.

How to find out the username and password if lost?

In order to find out the login and password for accessing the Internet, the administrator page or the local network, you should use specialized programs (Dialupass, Remote Desktop PassView, RouterPassView), which can find the necessary data in encrypted files of the network usage history.

Similar information can also be found on the home page of the router, if the access keys to it are not lost.

What to do if you forgot the password from the wifi (wi-fi) router?

If the user has forgotten the password from the wi-fi router, it is necessary to use specialized programs for reading encrypted information (Dialupass, Remote Desktop PassView, Router Pass View). But if the programs do not help, you will need to reset the device to factory settings by pressing a button located on the back of the router. Next, you should reconfigure the network equipment and the network itself.

Most residents of megacities have been using Wi-fi for a long time. Some of them are no longer able to imagine visiting cafes, cinemas or any other establishments without the Internet. Coming home, of course, I also want to have a home wireless network. Yes, it is very convenient for connecting a laptop, TV and smartphone or tablet to the Internet at the same time. But sometimes there is a need to connect another device, and you forgot the password from the router. How to find out the password from the router where to watch it? Read the article.

How to find out the Wi-Fi password if you forgot it?

There are several ways that you will read about in this article: with and without connecting a computer to a router.

The password from the router can be found using any computer that has already been previously connected to the global Internet wirelessly. This method is the easiest and fastest.

1. Click (right click) on the Wi-fi icon (ladder). It is located at the bottom of the screen. Select the second line labeled "Network Control Center ...".
2. Then you need to click "Wireless Network Management".
3. Another new window will appear. Select the connection you need and right-click on it and click on "Properties".
4. In the "Security" tab you will find the security key line and, accordingly, your hidden password. Click to display it and you will see the required password.

There are situations when there is no computer that has already been previously connected to a Wi-fi network. Then Where can I find the password for the router in this case? Then only the router itself is needed.

1. Each router comes with a dedicated power cord when purchased. Connect your computer to the router with it.
2. Turn on any convenient browser. Type in address bar the following values ​​are 168.1.1. This value may vary depending on the model. IP can be viewed on the device itself. Turn it over and you will see these values ​​in small print. Then you need to enter the username and password of the router. If you have not changed them, then they are standard on each device - admin and admin.
3. Then you need to click "Wireless" and then on the protection of the wireless mode. You will see the required password in the "PSK Password" line. If you have a router from Asus, then you can see his password right on the first page.

Router factory password

In production, they almost always put standard settings, as well as username and password. The username and password are almost always the same - admin. But still there are exceptions. For example, if we consider the D-Link DI-804 router, then the username will be the same, and the password string will remain empty. And the values ​​​​of the Zyxel Prestige 650 router are generally different. The username and password are as follows - 1234.

How to change the password on the router?

To do this, you also need to connect the router to the computer.

1. Go through the first two points that were described just above.
2. Go to the "Wireless" tab, and then to "Wireless Security".
3. Check the box (or dot) for WPA/WPA2.
4. Now you need to set certain settings:

Version - WPA2-PSK; and Encryption - Automatic.

1. In the PSK Password line, change existing password from wifi to a new one. Save your changes.
2. The router will need to reboot.
3. A red text may appear. Click "click here" which will of blue color. This completes the procedure for changing the Wi-fi password.

In conclusion, I would like to say that sometimes there is no way to find out or change the password. Perhaps the password from the router has already been changed and lost. Then there is another way out: reset all settings to factory settings, and then set them up again. But here it is worth remembering that the device will be like new, i.e. you will need to enter all the necessary parameters to connect to the Internet.

I forgot my router password. What is the default username and password?

This article contains information about passwords that default used to access the administration interface of routers / routers.

Default router address

A short list of popular router brands and their common default addresses.

IP addresses to access the router

default router password

except ip addresses to access the router, we also need to know the username and default password . Common default usernames include variations (Admin, administrator, etc.) and the administrator password is often just blank.

I have tried to give below standard , factory combinations password And login which are the default of some well-known manufacturers routers / routers .

All logins and passwords of routers

A complete list of factory default passwords can be found on the website.

On the site you can find passwords and logins of routers for most models. Manufacturers such as:

This list can help you if you forgot your router password. If you forgot the password is not the factory one, but the one that you set yourself. Then you have 2 options either reset your password or break it. It's easier to drop.)

This behavior occurs only because often people simply do not understand how dangerous it can be. It would seem that there is nothing wrong with using standard Wi-Fi passwords. Just think, someone will connect and download a couple of photos or listen to a few songs. It's not a problem.

And in fact, this is partly correct. From the fact that someone will use Internet access for harmless purposes, there will be no particular harm. Unless the access point will be used by terrorists or any other similar persons, and this is very unlikely. But one of the main snags is that, by connecting to the network, an attacker gets the opportunity to directly influence on-network devices.

And having acquired such an opportunity, you can easily and simply steal the personal data of the owner of the network and network equipment. Many may think that they have nothing to steal. But only those who have no idea about the principles of operation of operating systems and software as such think so. After all, there are records of everything that has ever been entered or viewed. And if you install special program, then the system will generally be under the complete control of the intruder.

But the greatest and most significant threat is not all of the above. The biggest danger is that through access to a wireless network, someone can commit serious crimes, and in which case they will come home to the owner of the network equipment. And it will be very difficult to prove one's non-involvement in the accusations sane by representatives of law enforcement agencies. So it turns out that someone has done things or earned money by fraud, and the innocent will take the rap. So should you use default passwords?

Selecting the type of encryption and password

Currently, two types of encryption are used in the civilian market for such equipment:

• WPA/WPA2.

The last two are different, but have general principle work.

WEP

It is the most vulnerable encryption method of all of the above. To crack it, you do not need to have any super-deep knowledge, so even a novice hacker or a fairly experienced user can do it within just a few minutes.

This acronym stands for Wired Equivalent Privacy. There is this encryption algorithm in two variations: WEP-40 and WEP-104. There is no fundamental difference in their work, and the only difference is the key length, which can be 5 and 13 alphanumeric characters, respectively.

If you answer the question, what is the standard Wi-Fi password with this encryption method, then it can be:

WPA/WPA2

Much more complex data encryption system. WPA, at its core, is a conglomerate of encryption types, each of constituent parts which protects some separate vulnerable part of it. The second differs from the first in the number of bits used in the algorithm, as well as additional crypto modules and some auxiliary technologies, such as AES (Advanced Encryption Standard) or an advanced encryption standard.

WPA or Wi-Fi Protected Access, compared to WEP, is initially designed for a longer key length and ranges from eight to sixty-three characters.

This becomes possible thanks to one of its components, namely through the use of TKIP, which allows you to increase the size of the decoder from 40 to 128 bits.

Thus, the selection or hacking for a person or a descriptor algorithm becomes many times more difficult, since in WEP there were only 2 options for the number of characters, and here there are as many as 55. The fact of determining the number of characters complicates the selection technique and raises security to unprecedented heights.

Related Articles

The most commonly used passwords for this type of security keys look like this:

Also, the number of standard passwords includes full names, surnames and patronymics, phone numbers.

If you are a regular reader of this site, then you probably remember what I have already managed to tell if, for example, I forgot it. Today I want to talk only about the password for entering the router interface - its users forget no less than the Wi-Fi password.

And why, in fact, ordinary user do you need to log into the router interface? There can be many reasons. For example, change the DNS provider if they are static, or add several. Be that as it may, if you want to enter the router's menu, you cannot do this without a login and password.

It is interesting that often the password for entering is changed not by the owner of the device, but by a company specialist who performs the initial configuration of the router to connect to the Internet. It is he who can change the password from the standard one to one that only he knows. Of course, he often forgets to tell the password to the owner of the router. You should not blame the person, because in fact he did the right thing by changing the standard password - otherwise, attackers can use it.

So how do you know necessary information? You will be surprised, but it is easy to do this. Almost every router model has a sticker, usually located on the bottom of the case. On it you can see, among other things, the IP address, login and password for entering the device interface.

Here, look at what the sticker looks like on the famous D-Link DIR-300 router:

Here we see the IP address for entering the interface, as well as the login and password, and in both cases the same word is used: admin. You can find out exactly what data is used for your router on the manufacturer's website.

Forgetting the Wi-Fi password is bad, but finding it out using the OS tools is as easy as shelling pears. But if you forgot the password from the router, this can become a serious problem, especially if you have already managed to change and forget the standard password from the router. But this problem is solvable, so do not rush to despair.

Use factory password

If you suddenly don’t know, you can access the web interface of the router by entering 192.168.1.1 into the address bar of your Internet browser (for models from TP-Link - 192.168.0.1).

Both the username and password set by the manufacturer are usually the word admin, but this is not always the case. On the RouterPasswords.com website, you can find complete list standard logins and passwords for routers of any manufacturer and any specific model. Although the popular brand TP-Link does not appear in the database of manufacturers, of which there are about two hundred, for some reason.

If you did not find data for your model on this resource, take a look at the user manual, because the manufacturer can indicate the login with the password there (or on a sticker on the bottom of the device).

Reset

If you changed the default password a long time ago, the easiest way to get access to the device is to reset the settings to factory settings. As you understand, after that you will have to set up your Wi-Fi router from scratch, so do not use this method, not being sure that you can set all the settings correctly yourself. If you have not yet changed your mind about using the reset, then look for a small Reset button on the body of the device, press it and do not release it for 10-15 seconds. Now you can log into the router interface using the standard login-password combination (read above).

Useful advice: By resetting the router settings, you can set up a new "login-password" bundle. You can leave the login as standard (admin) or specify the name of the PC user account instead. And instead of a password, you can use the serial number of the router or its mac-address. This data is indicated on the identification sticker under the bottom of the device, so it is no longer necessary to memorize or write it down. Forgot your password - just look at the sticker.

How to change the password from the router

To change the password of the router, you need to go to the corresponding menu section. However, the menu interface of the devices different manufacturers looks different. Consider some popular models different brands:

RouterPassView program

It makes sense to use this method only if you have saved the device configuration file in advance. After buying and configuring the router, this should be done in the first place, since this file will help, in which case, to restore not only the password, but also all the other settings of the router if they are suddenly reset for one reason or another.

You can save the configuration file in the router settings. You can find it in different settings menu items, depending on the router model you are using. So, for the Huawei HG8245H, this path looks like this: the System Tools tab on the top - the Configuration File line on the left - the Save button.

If you have a device configuration file saved in advance, download the RouterPassView program, which will help you extract the login and password from the web interface of your router from the data encrypted in the data file.

Using it is simple: select the menu item File, then click on the inscription Open and select a configuration file or use the mouse to drag it into the program window.

The more common your model, the faster you can recover the information you need. True, the list of supported routers is limited to only a few dozen models, most of which are from TP-Link and D-Link manufacturers.

Router Password Cracker Utility

All the beauty of this software product is that it does not require a saved file with the router configuration, which can only be obtained by knowing the password from the device. It is enough to have only a connection to the router (Wi-Fi or wired - it doesn’t matter) and that’s it. Just enter in the program window in the required fields the IP of the router, login and click on the Start Crack button.

However, this utility has a disadvantage: it uses a brute force method, so the search for a password can take a long time. But if you cannot recover the data you have forgotten in another way, you will have to be patient.