Tp link modem login. How to enter the router settings - Web management interface

Each instruction supplied with the TP-Link router contains an algorithm for setting up network equipment, but not a word about solving connection problems. But without access to the software part of the router, the user will not be able to configure the device.

In this article, the reader will learn TP-Link and its settings. A complete algorithm of actions will be proposed with step by step solution emerging problems. Naturally, to achieve the result, the user will have to use all the recommendations.

First power on

If we are talking about a completely new device, only purchased in a store and have never been turned on, then the connection performance here directly depends on the computer settings. In fact, by connecting the wires correctly, as described in the instructions, the user can easily dock the two devices.

Next is a matter of technology: how to enter the interface router TP-Link, specified in the same manual. You need to enter the IP address of the network device in the address bar of the browser and specify the login and password during authorization (they are identical - admin). This procedure is simple and does not require any knowledge of information technology from the owner of the router.

Configured network equipment

There are situations when a user purchases a used router. Here the situation can be resolved in several ways. Knowing how to enter the TP-Link router (if the seller changed the factory settings and transferred the authorization information to the buyer), you can easily reprogram network equipment for yourself.

But there are situations when the user does not have information about the IP address of the router, as well as the login and password. The problem is solved simply - you need equipment to factory settings. It's done special button Reset, which can be found in the control panel. Then the connection is made according to the instructions that come with the router. It also describes in detail how to log into the TP-Link router.

Provider Tricks

TP-Link products are quite popular among providers who provide network equipment to their customers for free (naturally, the user must connect on a contract basis). Here the situation for the owner is aggravated by the fact that programmers of organizations providing Internet access services very often install their own firmware with their own authorization system. The password, of course, is not disclosed to anyone.

Before thinking about how to go to TP link modem, the user needs to be convinced of the expediency of his desires. In most cases, the router is already configured and provides access to the Internet via both wired and wireless channels. But there are situations when you need to change the password on Wi-Fi or The problem is solved in several ways. You can ask the provider to change the settings or install factory firmware manufacturer.

Pitfalls in the software update process

It would seem that it could be easier than downloading the proprietary firmware from the official website of the manufacturer and installing it on the router? But there is a problem. The fact is that the user will not be able to access the "Administration" tab in the device control panel. You can hack anything - both software and hardware. The question here is different: is it really necessary to do this?

How to log in to TP-Link without knowing either the username or password? In addition, the network device itself has custom firmware. Just. Find out the IP address of the router and use special utility pour into the device new firmware forcibly. True, another question arises here: will the provider give its client settings for the network, having learned that he is using a non-branded device.

On the other side of the wire

Thinking about how to log into the TP-Link router, the user forgets that in addition to problems with the network device, inoperability can also be caused by the computer not being able to “see” the router. LAN card Any PC can be in three states: be disabled, work in static mode, or receive an IP address via DHCP. In the latter case, there should be no problems with connecting network equipment. But the first two conditions will have to be dealt with.

Can be disabled by hardware and software. If the device is not found operating system, you need to go to BIOS settings and turn it on (or install the driver). And the adapter is switched on programmatically through. Looking for answers to the question of how to access the TP-Link router, the user should not forget about the network settings.

User intervention

Going to the "Network Sharing Center", the owner should find the item "Change adapter settings". Next, select the desired network connection, and after calling the alternative menu of the selected icon, the user needs to go to the properties of the adapter. Everything is simple here. In the list of active components, you need to find the "IP version 4" menu and go to its properties.

In the menu that opens, the user needs to cancel the manual network settings by checking the box next to the inscription: “Receive automatically”. You need to do this for both the IP address and the DNS. In general, before accessing the TP-Link WR841N or any other network equipment, it is better to immediately make sure that the computer is configured to automatically obtain the address and domain name of the server (DNS).

Finally

As you can see from the review, there is nothing complicated in the computer. Yes, you need to spend more time on unnecessary procedures such as resetting, flashing network equipment, or changing personal computer settings. But these are ready-made solutions that will really help any user solve connection problems.

When wondering how to access a TP-Link router, any owner should understand that in most cases (99% probability guaranteed), the solution to the problem directly depends only on him. And of course, from knowledge that will always help to solve any task.

TP-Link is one of the most famous manufacturers of routers, and the products of this company are distinguished by quality, reliability and fairly affordable prices. But, having purchased one of these devices, users often cannot set it up on their own. Moreover, some of them do not even know how to log into the TP-LINK router and get into its main menu.

In fact, setting up a router is not such a difficult task, and once you have done it, you yourself will understand how simple it is. This article will help you understand everything and not make one of the common mistakes.

Training

Before you start connecting a TP-Link router, you need to do a little preparation. It consists in determining the network parameters of the provider and writing them down (or remembering them).

The first thing to deal with is the type of Internet connection. If you use a login and password to connect, then the connection is carried out via the PPPoE protocol and you can immediately connect a TP-Link router, the configuration of which will be discussed below.

If the login and password are not used for the connection, you must do the following:

1. Open the "Control Panel" and go to the "Network Management" tab.
2. Now pay attention to the sidebar (on the left). Here you need to select the line "Change adapter settings".
3. Before you is a list of connections (usually it is one). Click right click mouse on the one that is active in this moment, and select Properties.

You just have to select "TCP / IPv4 protocol" and click "Properties".

Determining the type of connection

The window that opens will allow you to determine the type of connection, which (not counting PPPoE) can be of two types:

• If you have the “Use IP address” line selected and filled in, then your connection type is called “Static IP”. In this case, you need to overwrite all the settings, and then select the "Obtain an IP address" option and click "OK".
• If the "Get an IP address" line is active immediately, then you have a "Dynamic IP" connection. This means that you do not need to rewrite anything and you can start connecting the TP-Link router.

In any case, you can now close all unnecessary windows and prepare for further actions.

Connecting a router

Now it's time to take the device out of the box and connect it to your computer. For this:

1. Connect the power supply to the device.
2. Connect the internet cable to the blue port.
3. Connect the device to the computer with a network cable. Any of the yellow ports will work for this.

1. Launch your browser. It's best if it's Internet Explorer or Edge (for Windows 10).
2. Enter the address of the TP-Link router. Usually this is a combination of numbers "192.168.1.1", but sometimes there are other options (they are written on the bottom panel of the device).
3. A window will appear in which you should enter the login and password of the TP-Link router. By default, you need to enter the word admin in both these lines.
4. From the menu (on the left), select Quick Setup.

After completing the above steps, you will find yourself in the main settings menu. Here you need to specify the connection type that you defined before accessing the TP-Link router.

Setting for PPPoE

If your connection is via PPPoE protocol, you need to select it in the main menu, click "Next" and enter the settings:

• User Name - provider login.
• Password - password for connecting to the Internet.
• Confirm Password - password again.

Now click Next and enter:

• In the SSID field - the name of the access point (of your choice).
• PSK Password - think up and enter a password.
• Wireless Security - Specify WPA-PSK/WPA2-PSK.

After that, you just have to click Next and reboot the router (Reboot).

Setting for static IP

Select the Static IP line in the main menu if your connection is made using this protocol. Before you is a window with several lines that you need to fill in manually. These are the same parameters that you rewrote from network settings Windows before accessing the TP-Link router.

After filling in all the lines, carefully check them again, and then click Next. In the next window, you need to enter the name of the access point (of your choice), password (create it yourself), click Next and reboot the router.

Setting for dynamic IP

If you have a dynamic IP and use a TP-Link router, the setup will be very simple. In the menu, you need to select Dynamic IP, click Next and enter the name of the access point, as well as the password for it.

After that, you just have to click Next, and then Finish. A reboot is not required in this case.

Setup using a dedicated disc

To facilitate the process of setting up a TP-Link router, a special disk can be used. It does not come with all device models, but if you have it, you can simply insert it into the CD-Rom and follow the prompts on the screen to complete the setup procedure in a few clicks.

Possible problems

Sometimes it happens that the provider blocks the connection by MAC address. In this case, you need to do the following:

1. Go to your router settings.
2. Go to the Network section, and then select the MAC Clone sub-item.
3. Here you need to click Clone MAC Address, and then save the changes (Save).

By the way, it’s best to contact your provider’s support service before going to the TP-Link router and clarify this issue with them.

Password reset

If you do not remember the password to enter the device settings, then you can reset it. To do this, press the Reset button, which you will find on the back panel, and hold it for a few seconds. This will reset all settings to factory defaults and you will be able to enter the settings using default password(admin).

In some cases, the password initially differs from the standard one. If so, you can find it on the bottom of the router. The login is also usually written there, as well as other data necessary to enter the device settings.

To change the password for authorization in wifi networks or see now set password you need to know how to enter the router settings. Also, the panel through the control panel, you can configure the name of the access point, network settings, connection status and other settings.

TP Link Router

All tp link routers have a similar configuration, so the instructions are suitable for all device models. Going into the configuration settings is quite simple.

Follow instructions:

• First you need to connect your computer to the router via a Wi-Fi network;
• Once the connection is established, check if the Internet is working - this is an indicator that the router is working in the usual mode;
• Use any browser installed on your computer. V address bar enter the address 192.168.0.1 or 192.168.0.1. The address for accessing the system control panel of the router is indicated on the bottom panel of the router. After entering the local address in the address bar, you must press the Enter key. The following window will appear:

Router login window

• In the window, you must enter your login and password to enter. As a rule, these are admin and admin. If this combination does not work, check the bottom panel of the router or the user manual. There must be login information;
• After entering the login and password, the control panel will appear. It looks like this:

Control panel appearance

D-Link router

d link routers are one of the most popular on modern market routers. Their feature lies in the ease of setup. As a result, they are perfect for home use. Also, the router can support several communication methods at once. You can set up your device in two ways:

• Using the disk that is included with the product;
• By going to the configuration settings panel.

To access the settings panel, launch any browser installed on your PC and follow the instructions below:

• Enter IP168.0.1 in the address bar - d link routers connect only to this address;
• Press Enter;
• In the window that opens, enter the data for authorization. The default password is 1234 and the username is admin. This data may change if you purchased the router directly from the provider;

• The control panel looks like this:

Router settings panel

Asus router

Asus routers are fast and affordable. Before setting up these types of routers, it is better to connect directly to the computer, and not connect using a Wi-Fi connection.

The connection diagram is shown in the figure below:

How to connect an Asus router to a computer

The WAN Internet cable is indicated in yellow, LAN is the port used to connect to personal computer. After the router is connected to the computer, the PC will need to be set to automatically obtain an address in the network settings. Go to the network control center, click on the router network and open the Internet protocol properties window. Set automatic IP acquisition.

Configuring automatic IP acquisition

Now open the browser that you use by default on your computer. In the search bar, enter the address 192.168.1.1 and in the dialog box that opens, enter the name of the network administrator and the password to access it. For Asus devices, these are admin and admin.

After completing these steps, the router configuration management window will open:

Asus router settings window

Remember! You need to connect to the settings panel after connecting the router to the computer. Otherwise, when trying to access viawifi, you may get a message that the browser was unable to connect to the remote server.

Router Zyxel Keenetic

A feature of the Zyxel Keenetic router series is their powerful technical specifications. Thanks to them, the router has a wide range of action. However, these routers are quite expensive. Their price varies from 1500 to 5000 rubles.

For correct operation of the device, it is necessary to configure its operation using the control panel of the router.

Follow instructions:

1. First, make sure your router firmware is up to date. latest version. current installed version can be viewed on the bottom of the device. The new software will help the user avoid problems during setup and further operation of the device. Download current version firmware can be from the official website of the manufacturer of the router;
2. In the address bar of the browser, enter the address 192.168.0.1 and press Enter;
3. In the window, enter your login and password to log in as the administrator of the router and get access to all information and settings. Password - 1234, login - admin. Remember that case matters.

Control Panel zyxel router Keenetic

Routers Rostelecom

Rostelecom has been providing its users with its own branded routers for several years. As a rule, they are produced by well-known manufacturers on the market: D Link, QTech, Sagemcom or Huawei. More than 80% of routers for a Russian company are manufactured by Sagemcom. Let's take a closer look at how to enter the settings of such a router:

1. Connect the computer to the router via Wi-Fi;
2. In the browser, enter the address of the web interface of the router 192.168.1.1 and press Enter;
3. In the pop-up window, enter the password - admin or login - admin. If these details do not match, try logging in using your login. superadmin and password [email protected] . Thus, you will enter the control panel as a superuser.

Rostelecom Router Settings Panel

If you can't connect to the router's web address

If after entering the IP address 192.168.1.1 or 192.168.0.1 the browser window shown in the figure appears, this indicates that it is necessary to additional setting router.

Unsuccessful attempt to connect to the web address of the router

There are two possible reasons connection errors:

• The router is incorrectly connected to the computer (in the case when the connection is not made through Wi-Fi, but through the ports of the computer and router);

The correct scheme for connecting the router to the computer is shown in the figure above. The very connection to a computer or laptop will look like this:

Router connected to a laptop using a network cable

If everything is connected correctly, one of the indicators will light up on the router, which is responsible for the operation of the LAN port.

The operation of the indicator responsible for the LAN port

• Another reason for a web address connection error is that the computer has wrong settings networks.

After correct connection router to the computer on the PC taskbar, open the window current connections:

Current connections window in Windows OS

The computer must be connected to the router. If the connection status is set to "No Internet access", you need to make network settings.

To do this, follow the instructions:

• Go to the network control center and public access. To do this, right-click on the current connections icon and select the appropriate menu item, as shown in the figure below:

Opening the Network Control Center on a PC

• Go to the window for changing network adapter settings;
• Select the LAN connection icon and open its properties window;

Opening LAN Properties

• In the list, select the protocol for connecting to the network version 4 and select its properties;
• In the window that opens, check the boxes next to the options for obtaining IP and DNS addresses, as shown in the figure;

Setting the connection protocol

• Save all changes and try to enter the router settings panel again (using a browser).

Finding the router's IP address

In ninety percent of cases, you can go to the router settings at 192.168.1.1 or 192.168.0.1. If you spent everything necessary settings and Internet access appeared on the PC, but it cannot connect to the router settings panel, your router may use a special web address. In this case, you need to look at the desired IP in the connection settings on the user's computer.

Go to the Network and Sharing Center. Now find the connection icon using LAN. Right-click on it and select "Status". In the window that opens, click on the "Details" button. Additional information about the network connection will appear. Find the field "Default IP Gateway", its value is the address that you need to enter in the address bar of the browser.

IP Gateway Check

Setting the Connection Address Manually

The network may not support auto tuning IP addresses. In this case, you need to configure the network settings yourself. Go to the connection protocol settings window (Figure 17). Instead of automatic configuration, check the boxes "Use the following IP address" and "Use the following DNS server".

For tp-link routers, enter the following parameters:

Manual configuration of connection parameters for a tp link router

Users of routers from the manufacturer D Link must enter the following parameters to establish a connection:

Organization manual setting networks for D Link routers

Reset authorization data

If you are unable to remember the previously changed login and / or password at the authorization stage in the browser, the only way to solve the problem is to reset the router settings. All parameters will be returned to the original (factory) configuration and the access password will become the default. It is indicated in the user manual or on the bottom cover of the router.

The reset process is very simple. There is a reset button on the back of the router, you need to hold it with any sharp object for 10-15 seconds. After clicking, all settings will be returned to the factory settings, and you can enter the router control panel using a standard login and password.

Button to return to standard parameters router

Using all the methods described in this article, you can quickly log in to the router control panel for further configuration.

Viewed: 4 087

Figure 1: Router login address http://tplinkwifi.net, login admin and password admin.

Tplinkwifi.net - entry address to Personal Area and settings of TP-Link routers. In fact, this is a router management interface through which a connection is made with local network and the internet. You can log in as well as on sites from a browser: Firefox, Opera, IE, Safari and others. But, since you are here, it means that there was a problem and it was not possible to enter your personal account. We solve the problem with Windows settings, router and restore access to the network without calling the wizard.

The ability to enter the router settings at tplinkwifi.net was added a couple of years ago, starting with TP-Link router models: TL-WR720N, TL-WR741ND, TL-WR840N, WR841N, TL-WR940N, new TP-Link routers: C2, C7 , C20, C50 and older models. If the router supports this option, then the information is indicated on the sticker at the bottom of the equipment and in the instructions for use. The classic methods with entering the address are also saved, 192.168.0.1 and. If you can't visit tplinkwifi.net, try doing .

If the login and password have not changed, then log in using the factory settings, admin and admin, respectively. For security reasons, it is better to change the password and write it down

Figure 3: at the top is the login address, at the bottom is the field for entering the login and password, by default: admin-admin.

tplinkwifi login: tplinkwifi.net, login, password

If the process is completed correctly, then the router management interface will be displayed on the screen. Logging into the modem's personal account was successful. But if it was, you wouldn't be here

Can't access tplinkwifi.net

Login interface does not open

We went to tplinkwifi.net, but did not get into the control panel of my personal account

The reason is the wrong login and access password. The password has been changed before. Complete full reset router to factory settings or remember the password for tplinkwifi.net, log in to your personal account first.

The offensive cause of the error is a breakdown of the router. Articles won't help here.

Learn more about Internet settings in IPv4. To avoid mistakes, remember the main thing, the settings in local connections are made to the router, and the connection settings to the provider are in tplinkwifi.net. V local connection specify the address and DNS of the TP-Link router, not the public DNS and IP of the provider! Changes are made along the way Network connections- adapter settings - Internet protocol IP version 4 (TCP/IPv4)". First, try automatically obtaining an IP address and DNS addresses.

Set up an Internet connection using the settings of the provider.

Address list for setting up TP-Link equipment

• tplinkwifi.net - WiFi routers TP-Link of the latest generations;
• tplinkap.net - TP-Link access points;
• tplinkextender.net - TP-Link repeaters and signal amplifiers;
• tplinklogin.net - old versions of TP-Link firmware and routers;
• tplinkmodem.net - TP-Link ADSL modems and routers;
• 192.168.0.1 or 192.168.1.1, depending on the model.

List of possible passwords and IP addresses

Video instruction for logging in via admin-admin

I could not resist the atmospheric video with the Hindu. Fortunately, everything is clear from it.

1. By default, login is admin, password is admin.
2. Couriers-adjusters must change the password in the settings to the Serial number indicated on the box (S/N). When reconfiguring, it is also recommended to use it as a password for the router and wi-fi S / N ( serial number).
3. Resetting the router settings is done by pressing and holding the Reset button on the back of the router for 10 seconds.

In order to get into the web interface of the router, you need to open your Internet browser and type in the address bar http://192.168.1.1 , User Name admin, Password- admin(provided that the router has factory settings and its IP has not changed).

Change the factory password.

For security reasons, it is recommended to change the factory password.
Default: Login admin, password admin.
In the interface of the router, you need to go to the tab System Tools and choose Password.
In field Old User Name enter admin, old password enter admin.
Into the fields New User Name, New Password, Confirm New Password enter new login(you can leave the old "admin"), as well as New password and its repetition, respectively.

Then press the button Save.

SettingWiFion the router.

In the router interface, select the tab on the left " Wireless ”, in the list that opens, select “ Wireless Serrings».

We set the parameters as follows:

1. Field " SSID': Enter the name of the wireless network.
2. Region: Russia
3. Chanel: Auto
4.Mode: 11bgn mixed
5. Channel Width: Automatic
6. Max Tx Rate: 300Mbps
7. Click the button below " Save»

On the left menu, select " Wireless", Further " Wireless Security"and set the parameters:

1. Set point to WPA-PSK/WPA2-PSK
2. Version: WPA2-PSK
3. Encryption: Automatic
4. PSK Password: you must enter any set of numbers, from 8 to 63 in length. They also need to be remembered so that you can specify them when connecting to the network. It is recommended to use the serial number of the device as a key (indicated on the box, in the form S/N########).
5. Click the button below " Save»

Internet connection setup.

SettingPPPoEconnections.

1. On the left, select the menu network, Further MAC Clone
2. Click Clone MAC address, Further Save (for details see In chapter MAC Cloning addresses»)
3. Next, select on the left WAN
4.WAN connection type: PPPoE
5.Username: Your login from the contract
6.Password:your password from the agreement
7. Set the point to Connect Automatically
8. Press the button " Save».

Setting up PPtP (VPN) when automatic receipt local IP address (DHCP).

1. On the left, select the menu network, Further MAC Clone
2. Click Clone MAC address, Further Save (for details see In chapter MAC Cloning addresses»)
3. Next, select on the left WAN
4.WAN connection type: PPTP
5.username: Your login from the contract
6.Password: Your contract password
7.Server IP Address/Name: ppp.lan
8. Set the point to Connect Automatically
9. Save the settings with the button " Save»

Setting up PPtP (VPN) with a static local IP address.

1.WAN connection type: PPTP
2.username: Your login from the contract
3.Password: Your contract password
4. Set the point to static IP
5.Server IP Address/Name: ppp.lan
6.IP address: We drive in your IP address according to the contract
7.subnet mask: We drive in a mask according to the contract
8.gateway: We drive in the gateway under the contract
9.DNS: 212.1.224.6
10. Set the point to Connect Automatically
11. Save the settings with the button « Save».

NAT when automatically obtaining an IP address (DHCP).

1. On the left, select the menu network, Further MAC Clone
2. Click Clone MAC address, Further Save (for details see In chapter MAC Cloning addresses»)
3. Next, select on the left WAN
4.WAN connection type: Dynamic IP
5. Save the settings with the button « Save».

MAC address cloning (required when setting upPPPoE, PPTPWith dynamic settings andDHCP)

Saving/restoring router settings.

menu Backup & Restore.

To save the current settings of the router, press the button Backup. The settings file will be saved to the specified location on the hard drive.

To restore settings from a file, you must click the file selection button, specify the path to the settings file, then click the button restore.